1 /* 2 * Copyright 2006, 2007, 2010 Freescale Semiconductor. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 #include <common.h> 24 #include <pci.h> 25 #include <asm/processor.h> 26 #include <asm/immap_86xx.h> 27 #include <asm/fsl_pci.h> 28 #include <asm/fsl_ddr_sdram.h> 29 #include <asm/io.h> 30 #include <libfdt.h> 31 #include <fdt_support.h> 32 #include <netdev.h> 33 34 phys_size_t fixed_sdram(void); 35 36 int board_early_init_f(void) 37 { 38 return 0; 39 } 40 41 int checkboard(void) 42 { 43 u8 vboot; 44 u8 *pixis_base = (u8 *)PIXIS_BASE; 45 46 printf ("Board: MPC8641HPCN, Sys ID: 0x%02x, " 47 "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", 48 in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER), 49 in_8(pixis_base + PIXIS_PVER)); 50 51 vboot = in_8(pixis_base + PIXIS_VBOOT); 52 if (vboot & PIXIS_VBOOT_FMAP) 53 printf ("vBank: %d\n", ((vboot & PIXIS_VBOOT_FBANK) >> 6)); 54 else 55 puts ("Promjet\n"); 56 57 #ifdef CONFIG_PHYS_64BIT 58 printf (" 36-bit physical address map\n"); 59 #endif 60 return 0; 61 } 62 63 const char *board_hwconfig = "foo:bar=baz"; 64 const char *cpu_hwconfig = "foo:bar=baz"; 65 66 phys_size_t 67 initdram(int board_type) 68 { 69 phys_size_t dram_size = 0; 70 71 #if defined(CONFIG_SPD_EEPROM) 72 dram_size = fsl_ddr_sdram(); 73 #else 74 dram_size = fixed_sdram(); 75 #endif 76 77 setup_ddr_bat(dram_size); 78 79 puts(" DDR: "); 80 return dram_size; 81 } 82 83 84 #if !defined(CONFIG_SPD_EEPROM) 85 /* 86 * Fixed sdram init -- doesn't use serial presence detect. 87 */ 88 phys_size_t 89 fixed_sdram(void) 90 { 91 #if !defined(CONFIG_SYS_RAMBOOT) 92 volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; 93 volatile ccsr_ddr_t *ddr = &immap->im_ddr1; 94 95 ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; 96 ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; 97 ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; 98 ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; 99 ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; 100 ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; 101 ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1; 102 ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2; 103 ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL; 104 ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT; 105 ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL; 106 ddr->sdram_ocd_cntl = CONFIG_SYS_DDR_OCD_CTRL; 107 ddr->sdram_ocd_status = CONFIG_SYS_DDR_OCD_STATUS; 108 109 #if defined (CONFIG_DDR_ECC) 110 ddr->err_disable = 0x0000008D; 111 ddr->err_sbe = 0x00ff0000; 112 #endif 113 asm("sync;isync"); 114 115 udelay(500); 116 117 #if defined (CONFIG_DDR_ECC) 118 /* Enable ECC checking */ 119 ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000); 120 #else 121 ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL; 122 ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2; 123 #endif 124 asm("sync; isync"); 125 126 udelay(500); 127 #endif 128 return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; 129 } 130 #endif /* !defined(CONFIG_SPD_EEPROM) */ 131 132 133 #if defined(CONFIG_PCI) 134 static struct pci_controller pcie1_hose; 135 #endif /* CONFIG_PCI */ 136 137 #ifdef CONFIG_PCIE2 138 static struct pci_controller pcie2_hose; 139 #endif /* CONFIG_PCIE2 */ 140 141 int first_free_busno = 0; 142 143 void pci_init_board(void) 144 { 145 #ifdef CONFIG_PCIE1 146 { 147 volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; 148 struct pci_controller *hose = &pcie1_hose; 149 struct pci_region *r = hose->regions; 150 volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR; 151 volatile ccsr_gur_t *gur = &immap->im_gur; 152 uint devdisr = gur->devdisr; 153 uint io_sel = (gur->pordevsr & MPC8641_PORDEVSR_IO_SEL) 154 >> MPC8641_PORDEVSR_IO_SEL_SHIFT; 155 int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel); 156 157 #ifdef DEBUG 158 uint host1_agent = (gur->porbmsr & MPC8641_PORBMSR_HA) 159 >> MPC8641_PORBMSR_HA_SHIFT; 160 uint pex1_agent = (host1_agent == 0) || (host1_agent == 1); 161 #endif 162 if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) { 163 debug("PCI-EXPRESS 1: %s \n", pex1_agent ? "Agent" : "Host"); 164 debug("0x%08x=0x%08x ", &pci->pme_msg_det, pci->pme_msg_det); 165 if (pci->pme_msg_det) { 166 pci->pme_msg_det = 0xffffffff; 167 debug(" with errors. Clearing. Now 0x%08x", 168 pci->pme_msg_det); 169 } 170 debug("\n"); 171 172 /* outbound memory */ 173 pci_set_region(r++, 174 CONFIG_SYS_PCIE1_MEM_BUS, 175 CONFIG_SYS_PCIE1_MEM_PHYS, 176 CONFIG_SYS_PCIE1_MEM_SIZE, 177 PCI_REGION_MEM); 178 179 /* outbound io */ 180 pci_set_region(r++, 181 CONFIG_SYS_PCIE1_IO_BUS, 182 CONFIG_SYS_PCIE1_IO_PHYS, 183 CONFIG_SYS_PCIE1_IO_SIZE, 184 PCI_REGION_IO); 185 186 hose->region_count = r - hose->regions; 187 188 hose->first_busno=first_free_busno; 189 190 fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); 191 192 first_free_busno=hose->last_busno+1; 193 printf (" PCI-EXPRESS 1 on bus %02x - %02x\n", 194 hose->first_busno,hose->last_busno); 195 196 /* 197 * Activate ULI1575 legacy chip by performing a fake 198 * memory access. Needed to make ULI RTC work. 199 */ 200 in_be32((unsigned *) ((char *)(CONFIG_SYS_PCIE1_MEM_VIRT 201 + CONFIG_SYS_PCIE1_MEM_SIZE - 0x1000000))); 202 203 } else { 204 puts("PCI-EXPRESS 1: Disabled\n"); 205 } 206 } 207 #else 208 puts("PCI-EXPRESS1: Disabled\n"); 209 #endif /* CONFIG_PCIE1 */ 210 211 #ifdef CONFIG_PCIE2 212 { 213 volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR; 214 struct pci_controller *hose = &pcie2_hose; 215 struct pci_region *r = hose->regions; 216 217 /* outbound memory */ 218 pci_set_region(r++, 219 CONFIG_SYS_PCIE2_MEM_BUS, 220 CONFIG_SYS_PCIE2_MEM_PHYS, 221 CONFIG_SYS_PCIE2_MEM_SIZE, 222 PCI_REGION_MEM); 223 224 /* outbound io */ 225 pci_set_region(r++, 226 CONFIG_SYS_PCIE2_IO_BUS, 227 CONFIG_SYS_PCIE2_IO_PHYS, 228 CONFIG_SYS_PCIE2_IO_SIZE, 229 PCI_REGION_IO); 230 231 hose->region_count = r - hose->regions; 232 233 hose->first_busno=first_free_busno; 234 235 fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); 236 237 first_free_busno=hose->last_busno+1; 238 printf (" PCI-EXPRESS 2 on bus %02x - %02x\n", 239 hose->first_busno,hose->last_busno); 240 } 241 #else 242 puts("PCI-EXPRESS 2: Disabled\n"); 243 #endif /* CONFIG_PCIE2 */ 244 245 } 246 247 248 #if defined(CONFIG_OF_BOARD_SETUP) 249 void 250 ft_board_setup(void *blob, bd_t *bd) 251 { 252 int off; 253 u64 *tmp; 254 u32 *addrcells; 255 256 ft_cpu_setup(blob, bd); 257 258 FT_FSL_PCI_SETUP; 259 260 /* 261 * Warn if it looks like the device tree doesn't match u-boot. 262 * This is just an estimation, based on the location of CCSR, 263 * which is defined by the "reg" property in the soc node. 264 */ 265 off = fdt_path_offset(blob, "/soc8641"); 266 addrcells = (u32 *)fdt_getprop(blob, 0, "#address-cells", NULL); 267 tmp = (u64 *)fdt_getprop(blob, off, "reg", NULL); 268 269 if (tmp) { 270 u64 addr; 271 if (addrcells && (*addrcells == 1)) 272 addr = *(u32 *)tmp; 273 else 274 addr = *tmp; 275 276 if (addr != CONFIG_SYS_CCSRBAR_PHYS) 277 printf("WARNING: The CCSRBAR address in your .dts " 278 "does not match the address of the CCSR " 279 "in u-boot. This means your .dts might " 280 "be old.\n"); 281 } 282 } 283 #endif 284 285 286 /* 287 * get_board_sys_clk 288 * Reads the FPGA on board for CONFIG_SYS_CLK_FREQ 289 */ 290 291 unsigned long 292 get_board_sys_clk(ulong dummy) 293 { 294 u8 i, go_bit, rd_clks; 295 ulong val = 0; 296 u8 *pixis_base = (u8 *)PIXIS_BASE; 297 298 go_bit = in_8(pixis_base + PIXIS_VCTL); 299 go_bit &= 0x01; 300 301 rd_clks = in_8(pixis_base + PIXIS_VCFGEN0); 302 rd_clks &= 0x1C; 303 304 /* 305 * Only if both go bit and the SCLK bit in VCFGEN0 are set 306 * should we be using the AUX register. Remember, we also set the 307 * GO bit to boot from the alternate bank on the on-board flash 308 */ 309 310 if (go_bit) { 311 if (rd_clks == 0x1c) 312 i = in_8(pixis_base + PIXIS_AUX); 313 else 314 i = in_8(pixis_base + PIXIS_SPD); 315 } else { 316 i = in_8(pixis_base + PIXIS_SPD); 317 } 318 319 i &= 0x07; 320 321 switch (i) { 322 case 0: 323 val = 33000000; 324 break; 325 case 1: 326 val = 40000000; 327 break; 328 case 2: 329 val = 50000000; 330 break; 331 case 3: 332 val = 66000000; 333 break; 334 case 4: 335 val = 83000000; 336 break; 337 case 5: 338 val = 100000000; 339 break; 340 case 6: 341 val = 134000000; 342 break; 343 case 7: 344 val = 166000000; 345 break; 346 } 347 348 return val; 349 } 350 351 int board_eth_init(bd_t *bis) 352 { 353 /* Initialize TSECs */ 354 cpu_eth_init(bis); 355 return pci_eth_init(bis); 356 } 357 358 void board_reset(void) 359 { 360 u8 *pixis_base = (u8 *)PIXIS_BASE; 361 362 out_8(pixis_base + PIXIS_RST, 0); 363 364 while (1) 365 ; 366 } 367 368 #ifdef CONFIG_MP 369 extern void cpu_mp_lmb_reserve(struct lmb *lmb); 370 371 void board_lmb_reserve(struct lmb *lmb) 372 { 373 cpu_mp_lmb_reserve(lmb); 374 } 375 #endif 376