1 /*
2  * Copyright 2007,2009 Freescale Semiconductor, Inc.
3  *
4  * See file CREDITS for list of people who contributed to this
5  * project.
6  *
7  * This program is free software; you can redistribute it and/or
8  * modify it under the terms of the GNU General Public License as
9  * published by the Free Software Foundation; either version 2 of
10  * the License, or (at your option) any later version.
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
15  * GNU General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, write to the Free Software
19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
20  * MA 02111-1307 USA
21  */
22 
23 #include <common.h>
24 #include <command.h>
25 #include <pci.h>
26 #include <asm/processor.h>
27 #include <asm/immap_86xx.h>
28 #include <asm/fsl_pci.h>
29 #include <asm/fsl_ddr_sdram.h>
30 #include <i2c.h>
31 #include <asm/io.h>
32 #include <libfdt.h>
33 #include <fdt_support.h>
34 #include <spd_sdram.h>
35 #include <netdev.h>
36 
37 #include "../common/pixis.h"
38 
39 void sdram_init(void);
40 phys_size_t fixed_sdram(void);
41 void mpc8610hpcd_diu_init(void);
42 
43 
44 /* called before any console output */
45 int board_early_init_f(void)
46 {
47 	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
48 	volatile ccsr_gur_t *gur = &immap->im_gur;
49 
50 	gur->gpiocr |= 0x88aa5500; /* DIU16, IR1, UART0, UART2 */
51 
52 	return 0;
53 }
54 
55 int misc_init_r(void)
56 {
57 	u8 tmp_val, version;
58 	u8 *pixis_base = (u8 *)PIXIS_BASE;
59 
60 	/*Do not use 8259PIC*/
61 	tmp_val = in_8(pixis_base + PIXIS_BRDCFG0);
62 	out_8(pixis_base + PIXIS_BRDCFG0, tmp_val | 0x80);
63 
64 	/*For FPGA V7 or higher, set the IRQMAPSEL to 0 to use MAP0 interrupt*/
65 	version = in_8(pixis_base + PIXIS_PVER);
66 	if(version >= 0x07) {
67 		tmp_val = in_8(pixis_base + PIXIS_BRDCFG0);
68 		out_8(pixis_base + PIXIS_BRDCFG0, tmp_val & 0xbf);
69 	}
70 
71 	/* Using this for DIU init before the driver in linux takes over
72 	 *  Enable the TFP410 Encoder (I2C address 0x38)
73 	 */
74 
75 	tmp_val = 0xBF;
76 	i2c_write(0x38, 0x08, 1, &tmp_val, sizeof(tmp_val));
77 	/* Verify if enabled */
78 	tmp_val = 0;
79 	i2c_read(0x38, 0x08, 1, &tmp_val, sizeof(tmp_val));
80 	debug("DVI Encoder Read: 0x%02lx\n",tmp_val);
81 
82 	tmp_val = 0x10;
83 	i2c_write(0x38, 0x0A, 1, &tmp_val, sizeof(tmp_val));
84 	/* Verify if enabled */
85 	tmp_val = 0;
86 	i2c_read(0x38, 0x0A, 1, &tmp_val, sizeof(tmp_val));
87 	debug("DVI Encoder Read: 0x%02lx\n",tmp_val);
88 
89 #ifdef CONFIG_FSL_DIU_FB
90 	mpc8610hpcd_diu_init();
91 #endif
92 
93 	return 0;
94 }
95 
96 int checkboard(void)
97 {
98 	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
99 	volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm;
100 	u8 *pixis_base = (u8 *)PIXIS_BASE;
101 
102 	printf ("Board: MPC8610HPCD, System ID: 0x%02x, "
103 		"System Version: 0x%02x, FPGA Version: 0x%02x\n",
104 		in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER),
105 		in_8(pixis_base + PIXIS_PVER));
106 
107 	mcm->abcr |= 0x00010000; /* 0 */
108 	mcm->hpmr3 = 0x80000008; /* 4c */
109 	mcm->hpmr0 = 0;
110 	mcm->hpmr1 = 0;
111 	mcm->hpmr2 = 0;
112 	mcm->hpmr4 = 0;
113 	mcm->hpmr5 = 0;
114 
115 	return 0;
116 }
117 
118 
119 phys_size_t
120 initdram(int board_type)
121 {
122 	phys_size_t dram_size = 0;
123 
124 #if defined(CONFIG_SPD_EEPROM)
125 	dram_size = fsl_ddr_sdram();
126 #else
127 	dram_size = fixed_sdram();
128 #endif
129 
130 	puts(" DDR: ");
131 	return dram_size;
132 }
133 
134 
135 #if !defined(CONFIG_SPD_EEPROM)
136 /*
137  * Fixed sdram init -- doesn't use serial presence detect.
138  */
139 
140 phys_size_t fixed_sdram(void)
141 {
142 #if !defined(CONFIG_SYS_RAMBOOT)
143 	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
144 	volatile ccsr_ddr_t *ddr = &immap->im_ddr1;
145 	uint d_init;
146 
147 	ddr->cs0_bnds = 0x0000001f;
148 	ddr->cs0_config = 0x80010202;
149 
150 	ddr->timing_cfg_3 = 0x00000000;
151 	ddr->timing_cfg_0 = 0x00260802;
152 	ddr->timing_cfg_1 = 0x3935d322;
153 	ddr->timing_cfg_2 = 0x14904cc8;
154 	ddr->sdram_mode = 0x00480432;
155 	ddr->sdram_mode_2 = 0x00000000;
156 	ddr->sdram_interval = 0x06180fff; /* 0x06180100; */
157 	ddr->sdram_data_init = 0xDEADBEEF;
158 	ddr->sdram_clk_cntl = 0x03800000;
159 	ddr->sdram_cfg_2 = 0x04400010;
160 
161 #if defined(CONFIG_DDR_ECC)
162 	ddr->err_int_en = 0x0000000d;
163 	ddr->err_disable = 0x00000000;
164 	ddr->err_sbe = 0x00010000;
165 #endif
166 	asm("sync;isync");
167 
168 	udelay(500);
169 
170 	ddr->sdram_cfg = 0xc3000000; /* 0xe3008000;*/
171 
172 
173 #if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
174 	d_init = 1;
175 	debug("DDR - 1st controller: memory initializing\n");
176 	/*
177 	 * Poll until memory is initialized.
178 	 * 512 Meg at 400 might hit this 200 times or so.
179 	 */
180 	while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0)
181 		udelay(1000);
182 
183 	debug("DDR: memory initialized\n\n");
184 	asm("sync; isync");
185 	udelay(500);
186 #endif
187 
188 	return 512 * 1024 * 1024;
189 #endif
190 	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
191 }
192 
193 #endif
194 
195 #if defined(CONFIG_PCI)
196 /*
197  * Initialize PCI Devices, report devices found.
198  */
199 
200 #ifndef CONFIG_PCI_PNP
201 static struct pci_config_table pci_fsl86xxads_config_table[] = {
202 	{PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
203 	 PCI_IDSEL_NUMBER, PCI_ANY_ID,
204 	 pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
205 				 PCI_ENET0_MEMADDR,
206 				 PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER} },
207 	{}
208 };
209 #endif
210 
211 
212 static struct pci_controller pci1_hose = {
213 #ifndef CONFIG_PCI_PNP
214 config_table:pci_mpc86xxcts_config_table
215 #endif
216 };
217 #endif /* CONFIG_PCI */
218 
219 #ifdef CONFIG_PCIE1
220 static struct pci_controller pcie1_hose;
221 #endif
222 
223 #ifdef CONFIG_PCIE2
224 static struct pci_controller pcie2_hose;
225 #endif
226 
227 void pci_init_board(void)
228 {
229 	volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR;
230 	volatile ccsr_gur_t *gur = &immap->im_gur;
231 	struct fsl_pci_info pci_info[3];
232 	u32 devdisr, pordevsr, io_sel;
233 	int first_free_busno = 0;
234 	int num = 0;
235 
236 	int pci_agent, pcie_ep, pcie_configured;
237 
238 	devdisr = in_be32(&gur->devdisr);
239 	pordevsr = in_be32(&gur->pordevsr);
240 	io_sel = (pordevsr & MPC8610_PORDEVSR_IO_SEL)
241 			>> MPC8610_PORDEVSR_IO_SEL_SHIFT;
242 
243 	debug ("   pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
244 
245 #ifdef CONFIG_PCIE1
246 	pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
247 
248 	if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE1)){
249 		SET_STD_PCIE_INFO(pci_info[num], 1);
250 		pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
251 		printf ("    PCIE1 connected to ULI as %s (base addr %lx)\n",
252 				pcie_ep ? "Endpoint" : "Root Complex",
253 				pci_info[num].regs);
254 
255 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
256 					&pcie1_hose, first_free_busno);
257 	} else {
258 		printf ("    PCIE1: disabled\n");
259 	}
260 
261 	puts("\n");
262 #else
263 	setbits_be32(&gur->devdisr, MPC86xx_DEVDISR_PCIE1); /* disable */
264 #endif
265 
266 #ifdef CONFIG_PCIE2
267 	pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel);
268 
269 	if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE2)){
270 		SET_STD_PCIE_INFO(pci_info[num], 2);
271 		pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
272 		printf ("    PCIE2 connected to Slot as %s (base addr %lx)\n",
273 				pcie_ep ? "Endpoint" : "Root Complex",
274 				pci_info[num].regs);
275 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
276 					&pcie2_hose, first_free_busno);
277 	} else {
278 		printf ("    PCIE2: disabled\n");
279 	}
280 
281 	puts("\n");
282 #else
283 	setbits_be32(&gur->devdisr, MPC86xx_DEVDISR_PCIE2); /* disable */
284 #endif
285 
286 #ifdef CONFIG_PCI1
287 	if (!(devdisr & MPC86xx_DEVDISR_PCI1)) {
288 		SET_STD_PCI_INFO(pci_info[num], 1);
289 		pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
290 		printf(" PCI connected to PCI slots as %s" \
291 			" (base address %lx)\n",
292 			pci_agent ? "Agent" : "Host",
293 			pci_info[num].regs);
294 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
295 					&pci1_hose, first_free_busno);
296 	} else {
297 		printf ("    PCI: disabled\n");
298 	}
299 
300 	puts("\n");
301 #else
302 	setbits_be32(&gur->devdisr, MPC86xx_DEVDISR_PCI1); /* disable */
303 #endif
304 }
305 
306 #if defined(CONFIG_OF_BOARD_SETUP)
307 void
308 ft_board_setup(void *blob, bd_t *bd)
309 {
310 	ft_cpu_setup(blob, bd);
311 
312 #ifdef CONFIG_PCI1
313 	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
314 #endif
315 #ifdef CONFIG_PCIE1
316 	ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
317 #endif
318 #ifdef CONFIG_PCIE2
319 	ft_fsl_pci_setup(blob, "pci2", &pcie2_hose);
320 #endif
321 }
322 #endif
323 
324 /*
325  * get_board_sys_clk
326  * Reads the FPGA on board for CONFIG_SYS_CLK_FREQ
327  */
328 
329 unsigned long
330 get_board_sys_clk(ulong dummy)
331 {
332 	u8 i;
333 	ulong val = 0;
334 	u8 *pixis_base = (u8 *)PIXIS_BASE;
335 
336 	i = in_8(pixis_base + PIXIS_SPD);
337 	i &= 0x07;
338 
339 	switch (i) {
340 	case 0:
341 		val = 33333000;
342 		break;
343 	case 1:
344 		val = 39999600;
345 		break;
346 	case 2:
347 		val = 49999500;
348 		break;
349 	case 3:
350 		val = 66666000;
351 		break;
352 	case 4:
353 		val = 83332500;
354 		break;
355 	case 5:
356 		val = 99999000;
357 		break;
358 	case 6:
359 		val = 133332000;
360 		break;
361 	case 7:
362 		val = 166665000;
363 		break;
364 	}
365 
366 	return val;
367 }
368 
369 int board_eth_init(bd_t *bis)
370 {
371 	return pci_eth_init(bis);
372 }
373 
374 void board_reset(void)
375 {
376 	u8 *pixis_base = (u8 *)PIXIS_BASE;
377 
378 	out_8(pixis_base + PIXIS_RST, 0);
379 
380 	while (1)
381 		;
382 }
383