xref: /openbmc/u-boot/board/freescale/mpc8572ds/tlb.c (revision f77d4410)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright 2008-2010 Freescale Semiconductor, Inc.
4  *
5  * (C) Copyright 2000
6  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
7  */
8 
9 #include <common.h>
10 #include <asm/mmu.h>
11 
12 struct fsl_e_tlb_entry tlb_table[] = {
13 	/* TLB 0 - for temp stack in cache */
14 	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
15 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
16 		      0, 0, BOOKE_PAGESZ_4K, 0),
17 	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
18 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
19 		      0, 0, BOOKE_PAGESZ_4K, 0),
20 	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
21 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
22 		      0, 0, BOOKE_PAGESZ_4K, 0),
23 	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
24 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
25 		      0, 0, BOOKE_PAGESZ_4K, 0),
26 
27 	/* TLB 1 */
28 	/* *I*** - Covers boot page */
29 	SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
30 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
31 		      0, 0, BOOKE_PAGESZ_4K, 1),
32 
33 	/* *I*G* - CCSRBAR */
34 	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
35 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
36 		      0, 1, BOOKE_PAGESZ_1M, 1),
37 
38 	/* W**G* - Flash/promjet, localbus */
39 	/* This will be changed to *I*G* after relocation to RAM. */
40 	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
41 		      MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
42 		      0, 2, BOOKE_PAGESZ_256M, 1),
43 
44 #ifndef CONFIG_NAND_SPL
45 	/* *I*G* - PCI */
46 	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT, CONFIG_SYS_PCIE3_MEM_PHYS,
47 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
48 		      0, 3, BOOKE_PAGESZ_1G, 1),
49 
50 	/* *I*G* - PCI */
51 	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x40000000, CONFIG_SYS_PCIE3_MEM_PHYS + 0x40000000,
52 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
53 		      0, 4, BOOKE_PAGESZ_256M, 1),
54 
55 	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x50000000, CONFIG_SYS_PCIE3_MEM_PHYS + 0x50000000,
56 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
57 		      0, 5, BOOKE_PAGESZ_256M, 1),
58 
59 	/* *I*G* - PCI I/O */
60 	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_IO_VIRT, CONFIG_SYS_PCIE3_IO_PHYS,
61 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
62 		      0, 6, BOOKE_PAGESZ_256K, 1),
63 #endif
64 
65 	/* *I*G - NAND */
66 	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
67 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
68 		      0, 7, BOOKE_PAGESZ_1M, 1),
69 
70 	SET_TLB_ENTRY(1, PIXIS_BASE, PIXIS_BASE_PHYS,
71 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
72 		      0, 8, BOOKE_PAGESZ_4K, 1),
73 
74 #if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
75 	/* *I*G - L2SRAM */
76 	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR,
77 			CONFIG_SYS_INIT_L2_ADDR_PHYS,
78 			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
79 			0, 9, BOOKE_PAGESZ_256K, 1),
80 	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000,
81 			CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000,
82 			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
83 			0, 10, BOOKE_PAGESZ_256K, 1),
84 #endif
85 };
86 
87 int num_tlb_entries = ARRAY_SIZE(tlb_table);
88