1 /* 2 * Copyright 2007 Freescale Semiconductor. 3 * 4 * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> 5 * 6 * See file CREDITS for list of people who contributed to this 7 * project. 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of 12 * the License, or (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 22 * MA 02111-1307 USA 23 */ 24 25 #include <common.h> 26 #include <pci.h> 27 #include <asm/processor.h> 28 #include <asm/mmu.h> 29 #include <asm/immap_85xx.h> 30 #include <asm/fsl_pci.h> 31 #include <asm/fsl_ddr_sdram.h> 32 #include <spd_sdram.h> 33 #include <i2c.h> 34 #include <ioports.h> 35 #include <libfdt.h> 36 #include <fdt_support.h> 37 38 #include "bcsr.h" 39 40 const qe_iop_conf_t qe_iop_conf_tab[] = { 41 /* GETH1 */ 42 {4, 10, 1, 0, 2}, /* TxD0 */ 43 {4, 9, 1, 0, 2}, /* TxD1 */ 44 {4, 8, 1, 0, 2}, /* TxD2 */ 45 {4, 7, 1, 0, 2}, /* TxD3 */ 46 {4, 23, 1, 0, 2}, /* TxD4 */ 47 {4, 22, 1, 0, 2}, /* TxD5 */ 48 {4, 21, 1, 0, 2}, /* TxD6 */ 49 {4, 20, 1, 0, 2}, /* TxD7 */ 50 {4, 15, 2, 0, 2}, /* RxD0 */ 51 {4, 14, 2, 0, 2}, /* RxD1 */ 52 {4, 13, 2, 0, 2}, /* RxD2 */ 53 {4, 12, 2, 0, 2}, /* RxD3 */ 54 {4, 29, 2, 0, 2}, /* RxD4 */ 55 {4, 28, 2, 0, 2}, /* RxD5 */ 56 {4, 27, 2, 0, 2}, /* RxD6 */ 57 {4, 26, 2, 0, 2}, /* RxD7 */ 58 {4, 11, 1, 0, 2}, /* TX_EN */ 59 {4, 24, 1, 0, 2}, /* TX_ER */ 60 {4, 16, 2, 0, 2}, /* RX_DV */ 61 {4, 30, 2, 0, 2}, /* RX_ER */ 62 {4, 17, 2, 0, 2}, /* RX_CLK */ 63 {4, 19, 1, 0, 2}, /* GTX_CLK */ 64 {1, 31, 2, 0, 3}, /* GTX125 */ 65 66 /* GETH2 */ 67 {5, 10, 1, 0, 2}, /* TxD0 */ 68 {5, 9, 1, 0, 2}, /* TxD1 */ 69 {5, 8, 1, 0, 2}, /* TxD2 */ 70 {5, 7, 1, 0, 2}, /* TxD3 */ 71 {5, 23, 1, 0, 2}, /* TxD4 */ 72 {5, 22, 1, 0, 2}, /* TxD5 */ 73 {5, 21, 1, 0, 2}, /* TxD6 */ 74 {5, 20, 1, 0, 2}, /* TxD7 */ 75 {5, 15, 2, 0, 2}, /* RxD0 */ 76 {5, 14, 2, 0, 2}, /* RxD1 */ 77 {5, 13, 2, 0, 2}, /* RxD2 */ 78 {5, 12, 2, 0, 2}, /* RxD3 */ 79 {5, 29, 2, 0, 2}, /* RxD4 */ 80 {5, 28, 2, 0, 2}, /* RxD5 */ 81 {5, 27, 2, 0, 3}, /* RxD6 */ 82 {5, 26, 2, 0, 2}, /* RxD7 */ 83 {5, 11, 1, 0, 2}, /* TX_EN */ 84 {5, 24, 1, 0, 2}, /* TX_ER */ 85 {5, 16, 2, 0, 2}, /* RX_DV */ 86 {5, 30, 2, 0, 2}, /* RX_ER */ 87 {5, 17, 2, 0, 2}, /* RX_CLK */ 88 {5, 19, 1, 0, 2}, /* GTX_CLK */ 89 {1, 31, 2, 0, 3}, /* GTX125 */ 90 {4, 6, 3, 0, 2}, /* MDIO */ 91 {4, 5, 1, 0, 2}, /* MDC */ 92 93 /* UART1 */ 94 {2, 0, 1, 0, 2}, /* UART_SOUT1 */ 95 {2, 1, 1, 0, 2}, /* UART_RTS1 */ 96 {2, 2, 2, 0, 2}, /* UART_CTS1 */ 97 {2, 3, 2, 0, 2}, /* UART_SIN1 */ 98 99 {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ 100 }; 101 102 void local_bus_init(void); 103 void sdram_init(void); 104 105 int board_early_init_f (void) 106 { 107 /* 108 * Initialize local bus. 109 */ 110 local_bus_init (); 111 112 enable_8568mds_duart(); 113 enable_8568mds_flash_write(); 114 #if defined(CONFIG_UEC_ETH1) || defined(CONFIG_UEC_ETH2) 115 reset_8568mds_uccs(); 116 #endif 117 #if defined(CONFIG_QE) && !defined(CONFIG_eTSEC_MDIO_BUS) 118 enable_8568mds_qe_mdio(); 119 #endif 120 121 #ifdef CONFIG_SYS_I2C2_OFFSET 122 /* Enable I2C2_SCL and I2C2_SDA */ 123 volatile struct par_io *port_c; 124 port_c = (struct par_io*)(CONFIG_SYS_IMMR + 0xe0140); 125 port_c->cpdir2 |= 0x0f000000; 126 port_c->cppar2 &= ~0x0f000000; 127 port_c->cppar2 |= 0x0a000000; 128 #endif 129 130 return 0; 131 } 132 133 int checkboard (void) 134 { 135 printf ("Board: 8568 MDS\n"); 136 137 return 0; 138 } 139 140 phys_size_t 141 initdram(int board_type) 142 { 143 long dram_size = 0; 144 145 puts("Initializing\n"); 146 147 #if defined(CONFIG_DDR_DLL) 148 { 149 /* 150 * Work around to stabilize DDR DLL MSYNC_IN. 151 * Errata DDR9 seems to have been fixed. 152 * This is now the workaround for Errata DDR11: 153 * Override DLL = 1, Course Adj = 1, Tap Select = 0 154 */ 155 156 volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 157 158 gur->ddrdllcr = 0x81000000; 159 asm("sync;isync;msync"); 160 udelay(200); 161 } 162 #endif 163 164 dram_size = fsl_ddr_sdram(); 165 dram_size = setup_ddr_tlbs(dram_size / 0x100000); 166 dram_size *= 0x100000; 167 168 /* 169 * SDRAM Initialization 170 */ 171 sdram_init(); 172 173 puts(" DDR: "); 174 return dram_size; 175 } 176 177 /* 178 * Initialize Local Bus 179 */ 180 void 181 local_bus_init(void) 182 { 183 volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 184 volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); 185 186 uint clkdiv; 187 uint lbc_hz; 188 sys_info_t sysinfo; 189 190 get_sys_info(&sysinfo); 191 clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2; 192 lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; 193 194 gur->lbiuiplldcr1 = 0x00078080; 195 if (clkdiv == 16) { 196 gur->lbiuiplldcr0 = 0x7c0f1bf0; 197 } else if (clkdiv == 8) { 198 gur->lbiuiplldcr0 = 0x6c0f1bf0; 199 } else if (clkdiv == 4) { 200 gur->lbiuiplldcr0 = 0x5c0f1bf0; 201 } 202 203 lbc->lcrr |= 0x00030000; 204 205 asm("sync;isync;msync"); 206 } 207 208 /* 209 * Initialize SDRAM memory on the Local Bus. 210 */ 211 void 212 sdram_init(void) 213 { 214 #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) 215 216 uint idx; 217 volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); 218 uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; 219 uint lsdmr_common; 220 221 puts(" SDRAM: "); 222 223 print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); 224 225 /* 226 * Setup SDRAM Base and Option Registers 227 */ 228 lbc->or2 = CONFIG_SYS_OR2_PRELIM; 229 asm("msync"); 230 231 lbc->br2 = CONFIG_SYS_BR2_PRELIM; 232 asm("msync"); 233 234 lbc->lbcr = CONFIG_SYS_LBC_LBCR; 235 asm("msync"); 236 237 238 lbc->lsrt = CONFIG_SYS_LBC_LSRT; 239 lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; 240 asm("msync"); 241 242 /* 243 * MPC8568 uses "new" 15-16 style addressing. 244 */ 245 lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON; 246 lsdmr_common |= LSDMR_BSMA1516; 247 248 /* 249 * Issue PRECHARGE ALL command. 250 */ 251 lbc->lsdmr = lsdmr_common | LSDMR_OP_PCHALL; 252 asm("sync;msync"); 253 *sdram_addr = 0xff; 254 ppcDcbf((unsigned long) sdram_addr); 255 udelay(100); 256 257 /* 258 * Issue 8 AUTO REFRESH commands. 259 */ 260 for (idx = 0; idx < 8; idx++) { 261 lbc->lsdmr = lsdmr_common | LSDMR_OP_ARFRSH; 262 asm("sync;msync"); 263 *sdram_addr = 0xff; 264 ppcDcbf((unsigned long) sdram_addr); 265 udelay(100); 266 } 267 268 /* 269 * Issue 8 MODE-set command. 270 */ 271 lbc->lsdmr = lsdmr_common | LSDMR_OP_MRW; 272 asm("sync;msync"); 273 *sdram_addr = 0xff; 274 ppcDcbf((unsigned long) sdram_addr); 275 udelay(100); 276 277 /* 278 * Issue NORMAL OP command. 279 */ 280 lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL; 281 asm("sync;msync"); 282 *sdram_addr = 0xff; 283 ppcDcbf((unsigned long) sdram_addr); 284 udelay(200); /* Overkill. Must wait > 200 bus cycles */ 285 286 #endif /* enable SDRAM init */ 287 } 288 289 #if defined(CONFIG_PCI) 290 #ifndef CONFIG_PCI_PNP 291 static struct pci_config_table pci_mpc8568mds_config_table[] = { 292 { 293 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 294 pci_cfgfunc_config_device, 295 {PCI_ENET0_IOADDR, 296 PCI_ENET0_MEMADDR, 297 PCI_COMMON_MEMORY | PCI_COMMAND_MASTER} 298 }, 299 {} 300 }; 301 #endif 302 303 static struct pci_controller pci1_hose = { 304 #ifndef CONFIG_PCI_PNP 305 config_table: pci_mpc8568mds_config_table, 306 #endif 307 }; 308 #endif /* CONFIG_PCI */ 309 310 #ifdef CONFIG_PCIE1 311 static struct pci_controller pcie1_hose; 312 #endif /* CONFIG_PCIE1 */ 313 314 int first_free_busno = 0; 315 316 /* 317 * pib_init() -- Initialize the PCA9555 IO expander on the PIB board 318 */ 319 void 320 pib_init(void) 321 { 322 u8 val8, orig_i2c_bus; 323 /* 324 * Assign PIB PMC2/3 to PCI bus 325 */ 326 327 /*switch temporarily to I2C bus #2 */ 328 orig_i2c_bus = i2c_get_bus_num(); 329 i2c_set_bus_num(1); 330 331 val8 = 0x00; 332 i2c_write(0x23, 0x6, 1, &val8, 1); 333 i2c_write(0x23, 0x7, 1, &val8, 1); 334 val8 = 0xff; 335 i2c_write(0x23, 0x2, 1, &val8, 1); 336 i2c_write(0x23, 0x3, 1, &val8, 1); 337 338 val8 = 0x00; 339 i2c_write(0x26, 0x6, 1, &val8, 1); 340 val8 = 0x34; 341 i2c_write(0x26, 0x7, 1, &val8, 1); 342 val8 = 0xf9; 343 i2c_write(0x26, 0x2, 1, &val8, 1); 344 val8 = 0xff; 345 i2c_write(0x26, 0x3, 1, &val8, 1); 346 347 val8 = 0x00; 348 i2c_write(0x27, 0x6, 1, &val8, 1); 349 i2c_write(0x27, 0x7, 1, &val8, 1); 350 val8 = 0xff; 351 i2c_write(0x27, 0x2, 1, &val8, 1); 352 val8 = 0xef; 353 i2c_write(0x27, 0x3, 1, &val8, 1); 354 355 asm("eieio"); 356 } 357 358 #ifdef CONFIG_PCI 359 void 360 pci_init_board(void) 361 { 362 volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 363 uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; 364 uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16; 365 366 #ifdef CONFIG_PCI1 367 { 368 pib_init(); 369 370 volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR; 371 struct pci_controller *hose = &pci1_hose; 372 struct pci_region *r = hose->regions; 373 374 uint pci_32 = 1; /* PORDEVSR[15] */ 375 uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; /* PORDEVSR[14] */ 376 uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; /* PORPLLSR[16] */ 377 378 uint pci_agent = (host_agent == 3) || (host_agent == 4 ) || (host_agent == 6); 379 380 uint pci_speed = 66666000; 381 382 if (!(gur->devdisr & MPC85xx_DEVDISR_PCI1)) { 383 printf (" PCI: %d bit, %s MHz, %s, %s, %s\n", 384 (pci_32) ? 32 : 64, 385 (pci_speed == 33333000) ? "33" : 386 (pci_speed == 66666000) ? "66" : "unknown", 387 pci_clk_sel ? "sync" : "async", 388 pci_agent ? "agent" : "host", 389 pci_arb ? "arbiter" : "external-arbiter" 390 ); 391 392 /* inbound */ 393 r += fsl_pci_setup_inbound_windows(r); 394 395 /* outbound memory */ 396 pci_set_region(r++, 397 CONFIG_SYS_PCI1_MEM_BUS, 398 CONFIG_SYS_PCI1_MEM_PHYS, 399 CONFIG_SYS_PCI1_MEM_SIZE, 400 PCI_REGION_MEM); 401 402 /* outbound io */ 403 pci_set_region(r++, 404 CONFIG_SYS_PCI1_IO_BUS, 405 CONFIG_SYS_PCI1_IO_PHYS, 406 CONFIG_SYS_PCI1_IO_SIZE, 407 PCI_REGION_IO); 408 409 hose->region_count = r - hose->regions; 410 411 hose->first_busno = first_free_busno; 412 pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); 413 414 fsl_pci_init(hose); 415 first_free_busno = hose->last_busno+1; 416 printf ("PCI on bus %02x - %02x\n",hose->first_busno,hose->last_busno); 417 } else { 418 printf (" PCI: disabled\n"); 419 } 420 } 421 #else 422 gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */ 423 #endif 424 425 #ifdef CONFIG_PCIE1 426 { 427 volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; 428 struct pci_controller *hose = &pcie1_hose; 429 int pcie_ep = (host_agent == 0) || (host_agent == 2 ) || (host_agent == 3); 430 struct pci_region *r = hose->regions; 431 432 int pcie_configured = io_sel >= 1; 433 434 if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){ 435 printf ("\n PCIE connected to slot as %s (base address %x)", 436 pcie_ep ? "End Point" : "Root Complex", 437 (uint)pci); 438 439 if (pci->pme_msg_det) { 440 pci->pme_msg_det = 0xffffffff; 441 debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det); 442 } 443 printf ("\n"); 444 445 /* inbound */ 446 r += fsl_pci_setup_inbound_windows(r); 447 448 /* outbound memory */ 449 pci_set_region(r++, 450 CONFIG_SYS_PCIE1_MEM_BUS, 451 CONFIG_SYS_PCIE1_MEM_PHYS, 452 CONFIG_SYS_PCIE1_MEM_SIZE, 453 PCI_REGION_MEM); 454 455 /* outbound io */ 456 pci_set_region(r++, 457 CONFIG_SYS_PCIE1_IO_BUS, 458 CONFIG_SYS_PCIE1_IO_PHYS, 459 CONFIG_SYS_PCIE1_IO_SIZE, 460 PCI_REGION_IO); 461 462 hose->region_count = r - hose->regions; 463 464 hose->first_busno=first_free_busno; 465 pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data); 466 467 fsl_pci_init(hose); 468 printf ("PCIE on bus %02x - %02x\n",hose->first_busno,hose->last_busno); 469 470 first_free_busno=hose->last_busno+1; 471 472 } else { 473 printf (" PCIE: disabled\n"); 474 } 475 } 476 #else 477 gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */ 478 #endif 479 } 480 #endif /* CONFIG_PCI */ 481 482 #if defined(CONFIG_OF_BOARD_SETUP) 483 void ft_board_setup(void *blob, bd_t *bd) 484 { 485 ft_cpu_setup(blob, bd); 486 487 #ifdef CONFIG_PCI1 488 ft_fsl_pci_setup(blob, "pci0", &pci1_hose); 489 #endif 490 #ifdef CONFIG_PCIE1 491 ft_fsl_pci_setup(blob, "pci1", &pcie1_hose); 492 #endif 493 } 494 #endif 495