1 /* 2 * Copyright 2007,2009-2010 Freescale Semiconductor, Inc. 3 * 4 * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> 5 * 6 * See file CREDITS for list of people who contributed to this 7 * project. 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of 12 * the License, or (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 22 * MA 02111-1307 USA 23 */ 24 25 #include <common.h> 26 #include <pci.h> 27 #include <asm/processor.h> 28 #include <asm/mmu.h> 29 #include <asm/immap_85xx.h> 30 #include <asm/fsl_pci.h> 31 #include <asm/fsl_ddr_sdram.h> 32 #include <asm/fsl_serdes.h> 33 #include <spd_sdram.h> 34 #include <i2c.h> 35 #include <ioports.h> 36 #include <libfdt.h> 37 #include <fdt_support.h> 38 39 #include "bcsr.h" 40 41 const qe_iop_conf_t qe_iop_conf_tab[] = { 42 /* GETH1 */ 43 {4, 10, 1, 0, 2}, /* TxD0 */ 44 {4, 9, 1, 0, 2}, /* TxD1 */ 45 {4, 8, 1, 0, 2}, /* TxD2 */ 46 {4, 7, 1, 0, 2}, /* TxD3 */ 47 {4, 23, 1, 0, 2}, /* TxD4 */ 48 {4, 22, 1, 0, 2}, /* TxD5 */ 49 {4, 21, 1, 0, 2}, /* TxD6 */ 50 {4, 20, 1, 0, 2}, /* TxD7 */ 51 {4, 15, 2, 0, 2}, /* RxD0 */ 52 {4, 14, 2, 0, 2}, /* RxD1 */ 53 {4, 13, 2, 0, 2}, /* RxD2 */ 54 {4, 12, 2, 0, 2}, /* RxD3 */ 55 {4, 29, 2, 0, 2}, /* RxD4 */ 56 {4, 28, 2, 0, 2}, /* RxD5 */ 57 {4, 27, 2, 0, 2}, /* RxD6 */ 58 {4, 26, 2, 0, 2}, /* RxD7 */ 59 {4, 11, 1, 0, 2}, /* TX_EN */ 60 {4, 24, 1, 0, 2}, /* TX_ER */ 61 {4, 16, 2, 0, 2}, /* RX_DV */ 62 {4, 30, 2, 0, 2}, /* RX_ER */ 63 {4, 17, 2, 0, 2}, /* RX_CLK */ 64 {4, 19, 1, 0, 2}, /* GTX_CLK */ 65 {1, 31, 2, 0, 3}, /* GTX125 */ 66 67 /* GETH2 */ 68 {5, 10, 1, 0, 2}, /* TxD0 */ 69 {5, 9, 1, 0, 2}, /* TxD1 */ 70 {5, 8, 1, 0, 2}, /* TxD2 */ 71 {5, 7, 1, 0, 2}, /* TxD3 */ 72 {5, 23, 1, 0, 2}, /* TxD4 */ 73 {5, 22, 1, 0, 2}, /* TxD5 */ 74 {5, 21, 1, 0, 2}, /* TxD6 */ 75 {5, 20, 1, 0, 2}, /* TxD7 */ 76 {5, 15, 2, 0, 2}, /* RxD0 */ 77 {5, 14, 2, 0, 2}, /* RxD1 */ 78 {5, 13, 2, 0, 2}, /* RxD2 */ 79 {5, 12, 2, 0, 2}, /* RxD3 */ 80 {5, 29, 2, 0, 2}, /* RxD4 */ 81 {5, 28, 2, 0, 2}, /* RxD5 */ 82 {5, 27, 2, 0, 3}, /* RxD6 */ 83 {5, 26, 2, 0, 2}, /* RxD7 */ 84 {5, 11, 1, 0, 2}, /* TX_EN */ 85 {5, 24, 1, 0, 2}, /* TX_ER */ 86 {5, 16, 2, 0, 2}, /* RX_DV */ 87 {5, 30, 2, 0, 2}, /* RX_ER */ 88 {5, 17, 2, 0, 2}, /* RX_CLK */ 89 {5, 19, 1, 0, 2}, /* GTX_CLK */ 90 {1, 31, 2, 0, 3}, /* GTX125 */ 91 {4, 6, 3, 0, 2}, /* MDIO */ 92 {4, 5, 1, 0, 2}, /* MDC */ 93 94 /* UART1 */ 95 {2, 0, 1, 0, 2}, /* UART_SOUT1 */ 96 {2, 1, 1, 0, 2}, /* UART_RTS1 */ 97 {2, 2, 2, 0, 2}, /* UART_CTS1 */ 98 {2, 3, 2, 0, 2}, /* UART_SIN1 */ 99 100 {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ 101 }; 102 103 void local_bus_init(void); 104 105 int board_early_init_f (void) 106 { 107 /* 108 * Initialize local bus. 109 */ 110 local_bus_init (); 111 112 enable_8568mds_duart(); 113 enable_8568mds_flash_write(); 114 #if defined(CONFIG_UEC_ETH1) || defined(CONFIG_UEC_ETH2) 115 reset_8568mds_uccs(); 116 #endif 117 #if defined(CONFIG_QE) && !defined(CONFIG_eTSEC_MDIO_BUS) 118 enable_8568mds_qe_mdio(); 119 #endif 120 121 #ifdef CONFIG_SYS_I2C2_OFFSET 122 /* Enable I2C2_SCL and I2C2_SDA */ 123 volatile struct par_io *port_c; 124 port_c = (struct par_io*)(CONFIG_SYS_IMMR + 0xe0140); 125 port_c->cpdir2 |= 0x0f000000; 126 port_c->cppar2 &= ~0x0f000000; 127 port_c->cppar2 |= 0x0a000000; 128 #endif 129 130 return 0; 131 } 132 133 int checkboard (void) 134 { 135 printf ("Board: 8568 MDS\n"); 136 137 return 0; 138 } 139 140 /* 141 * Initialize Local Bus 142 */ 143 void 144 local_bus_init(void) 145 { 146 volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 147 volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; 148 149 uint clkdiv; 150 uint lbc_hz; 151 sys_info_t sysinfo; 152 153 get_sys_info(&sysinfo); 154 clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2; 155 lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; 156 157 gur->lbiuiplldcr1 = 0x00078080; 158 if (clkdiv == 16) { 159 gur->lbiuiplldcr0 = 0x7c0f1bf0; 160 } else if (clkdiv == 8) { 161 gur->lbiuiplldcr0 = 0x6c0f1bf0; 162 } else if (clkdiv == 4) { 163 gur->lbiuiplldcr0 = 0x5c0f1bf0; 164 } 165 166 lbc->lcrr |= 0x00030000; 167 168 asm("sync;isync;msync"); 169 } 170 171 /* 172 * Initialize SDRAM memory on the Local Bus. 173 */ 174 void lbc_sdram_init(void) 175 { 176 #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) 177 178 uint idx; 179 volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; 180 uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; 181 uint lsdmr_common; 182 183 puts("LBC SDRAM: "); 184 print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, 185 "\n "); 186 187 /* 188 * Setup SDRAM Base and Option Registers 189 */ 190 set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); 191 set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); 192 asm("msync"); 193 194 lbc->lbcr = CONFIG_SYS_LBC_LBCR; 195 asm("msync"); 196 197 lbc->lsrt = CONFIG_SYS_LBC_LSRT; 198 lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; 199 asm("msync"); 200 201 /* 202 * MPC8568 uses "new" 15-16 style addressing. 203 */ 204 lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON; 205 lsdmr_common |= LSDMR_BSMA1516; 206 207 /* 208 * Issue PRECHARGE ALL command. 209 */ 210 lbc->lsdmr = lsdmr_common | LSDMR_OP_PCHALL; 211 asm("sync;msync"); 212 *sdram_addr = 0xff; 213 ppcDcbf((unsigned long) sdram_addr); 214 udelay(100); 215 216 /* 217 * Issue 8 AUTO REFRESH commands. 218 */ 219 for (idx = 0; idx < 8; idx++) { 220 lbc->lsdmr = lsdmr_common | LSDMR_OP_ARFRSH; 221 asm("sync;msync"); 222 *sdram_addr = 0xff; 223 ppcDcbf((unsigned long) sdram_addr); 224 udelay(100); 225 } 226 227 /* 228 * Issue 8 MODE-set command. 229 */ 230 lbc->lsdmr = lsdmr_common | LSDMR_OP_MRW; 231 asm("sync;msync"); 232 *sdram_addr = 0xff; 233 ppcDcbf((unsigned long) sdram_addr); 234 udelay(100); 235 236 /* 237 * Issue NORMAL OP command. 238 */ 239 lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL; 240 asm("sync;msync"); 241 *sdram_addr = 0xff; 242 ppcDcbf((unsigned long) sdram_addr); 243 udelay(200); /* Overkill. Must wait > 200 bus cycles */ 244 245 #endif /* enable SDRAM init */ 246 } 247 248 #if defined(CONFIG_PCI) 249 #ifndef CONFIG_PCI_PNP 250 static struct pci_config_table pci_mpc8568mds_config_table[] = { 251 { 252 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 253 pci_cfgfunc_config_device, 254 {PCI_ENET0_IOADDR, 255 PCI_ENET0_MEMADDR, 256 PCI_COMMON_MEMORY | PCI_COMMAND_MASTER} 257 }, 258 {} 259 }; 260 #endif 261 262 static struct pci_controller pci1_hose = { 263 #ifndef CONFIG_PCI_PNP 264 config_table: pci_mpc8568mds_config_table, 265 #endif 266 }; 267 #endif /* CONFIG_PCI */ 268 269 /* 270 * pib_init() -- Initialize the PCA9555 IO expander on the PIB board 271 */ 272 void 273 pib_init(void) 274 { 275 u8 val8, orig_i2c_bus; 276 /* 277 * Assign PIB PMC2/3 to PCI bus 278 */ 279 280 /*switch temporarily to I2C bus #2 */ 281 orig_i2c_bus = i2c_get_bus_num(); 282 i2c_set_bus_num(1); 283 284 val8 = 0x00; 285 i2c_write(0x23, 0x6, 1, &val8, 1); 286 i2c_write(0x23, 0x7, 1, &val8, 1); 287 val8 = 0xff; 288 i2c_write(0x23, 0x2, 1, &val8, 1); 289 i2c_write(0x23, 0x3, 1, &val8, 1); 290 291 val8 = 0x00; 292 i2c_write(0x26, 0x6, 1, &val8, 1); 293 val8 = 0x34; 294 i2c_write(0x26, 0x7, 1, &val8, 1); 295 val8 = 0xf9; 296 i2c_write(0x26, 0x2, 1, &val8, 1); 297 val8 = 0xff; 298 i2c_write(0x26, 0x3, 1, &val8, 1); 299 300 val8 = 0x00; 301 i2c_write(0x27, 0x6, 1, &val8, 1); 302 i2c_write(0x27, 0x7, 1, &val8, 1); 303 val8 = 0xff; 304 i2c_write(0x27, 0x2, 1, &val8, 1); 305 val8 = 0xef; 306 i2c_write(0x27, 0x3, 1, &val8, 1); 307 308 asm("eieio"); 309 } 310 311 #ifdef CONFIG_PCI 312 void pci_init_board(void) 313 { 314 volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 315 int first_free_busno = 0; 316 #ifdef CONFIG_PCI1 317 struct fsl_pci_info pci_info; 318 u32 devdisr, pordevsr, io_sel; 319 u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel; 320 321 devdisr = in_be32(&gur->devdisr); 322 pordevsr = in_be32(&gur->pordevsr); 323 porpllsr = in_be32(&gur->porpllsr); 324 io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; 325 326 debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel); 327 328 pci_speed = 66666000; 329 pci_32 = 1; 330 pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; 331 pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; 332 333 if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { 334 SET_STD_PCI_INFO(pci_info, 1); 335 set_next_law(pci_info.mem_phys, 336 law_size_bits(pci_info.mem_size), pci_info.law); 337 set_next_law(pci_info.io_phys, 338 law_size_bits(pci_info.io_size), pci_info.law); 339 340 pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs); 341 printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n", 342 (pci_32) ? 32 : 64, 343 (pci_speed == 33333000) ? "33" : 344 (pci_speed == 66666000) ? "66" : "unknown", 345 pci_clk_sel ? "sync" : "async", 346 pci_agent ? "agent" : "host", 347 pci_arb ? "arbiter" : "external-arbiter", 348 pci_info.regs); 349 350 first_free_busno = fsl_pci_init_port(&pci_info, 351 &pci1_hose, first_free_busno); 352 } else { 353 printf("PCI: disabled\n"); 354 } 355 356 puts("\n"); 357 #else 358 setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */ 359 #endif 360 361 fsl_pcie_init_board(first_free_busno); 362 } 363 #endif /* CONFIG_PCI */ 364 365 #if defined(CONFIG_OF_BOARD_SETUP) 366 void ft_board_setup(void *blob, bd_t *bd) 367 { 368 ft_cpu_setup(blob, bd); 369 370 FT_FSL_PCI_SETUP; 371 } 372 #endif 373