1 /* 2 * Copyright 2007 Freescale Semiconductor. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 #include <common.h> 24 #include <asm/io.h> 25 26 #include "bcsr.h" 27 28 void enable_8568mds_duart() 29 { 30 volatile uint* duart_mux = (uint *)(CONFIG_SYS_CCSRBAR + 0xe0060); 31 volatile uint* devices = (uint *)(CONFIG_SYS_CCSRBAR + 0xe0070); 32 volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR); 33 34 *duart_mux = 0x80000000; /* Set the mux to Duart on PMUXCR */ 35 *devices = 0; /* Enable all peripheral devices */ 36 bcsr[5] |= 0x01; /* Enable Duart in BCSR*/ 37 } 38 39 void enable_8568mds_flash_write() 40 { 41 volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR); 42 43 bcsr[9] |= 0x01; 44 } 45 46 void disable_8568mds_flash_write() 47 { 48 volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR); 49 50 bcsr[9] &= ~(0x01); 51 } 52 53 void enable_8568mds_qe_mdio() 54 { 55 u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR); 56 57 bcsr[7] |= 0x01; 58 } 59 60 #if defined(CONFIG_UEC_ETH1) || defined(CONFIG_UEC_ETH2) 61 void reset_8568mds_uccs(void) 62 { 63 volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR); 64 65 /* Turn off UCC1 & UCC2 */ 66 out_8(&bcsr[8], in_8(&bcsr[8]) & ~BCSR_UCC1_GETH_EN); 67 out_8(&bcsr[9], in_8(&bcsr[9]) & ~BCSR_UCC2_GETH_EN); 68 69 /* Mode is RGMII, all bits clear */ 70 out_8(&bcsr[11], in_8(&bcsr[11]) & ~(BCSR_UCC1_MODE_MSK | 71 BCSR_UCC2_MODE_MSK)); 72 73 /* Turn UCC1 & UCC2 on */ 74 out_8(&bcsr[8], in_8(&bcsr[8]) | BCSR_UCC1_GETH_EN); 75 out_8(&bcsr[9], in_8(&bcsr[9]) | BCSR_UCC2_GETH_EN); 76 } 77 #endif 78