1 /*
2  * Copyright 2004 Freescale Semiconductor.
3  *
4  * See file CREDITS for list of people who contributed to this
5  * project.
6  *
7  * This program is free software; you can redistribute it and/or
8  * modify it under the terms of the GNU General Public License as
9  * published by the Free Software Foundation; either version 2 of
10  * the License, or (at your option) any later version.
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
15  * GNU General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, write to the Free Software
19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
20  * MA 02111-1307 USA
21  */
22 
23 #include <common.h>
24 #include <pci.h>
25 #include <asm/processor.h>
26 #include <asm/mmu.h>
27 #include <asm/immap_85xx.h>
28 #include <asm/fsl_ddr_sdram.h>
29 #include <ioports.h>
30 #include <spd_sdram.h>
31 #include <libfdt.h>
32 #include <fdt_support.h>
33 
34 #include "../common/cadmus.h"
35 #include "../common/eeprom.h"
36 #include "../common/via.h"
37 
38 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
39 extern void ddr_enable_ecc(unsigned int dram_size);
40 #endif
41 
42 void local_bus_init(void);
43 void sdram_init(void);
44 
45 /*
46  * I/O Port configuration table
47  *
48  * if conf is 1, then that port pin will be configured at boot time
49  * according to the five values podr/pdir/ppar/psor/pdat for that entry
50  */
51 
52 const iop_conf_t iop_conf_tab[4][32] = {
53 
54     /* Port A configuration */
55     {   /*            conf ppar psor pdir podr pdat */
56 	/* PA31 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 TxENB */
57 	/* PA30 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 TxClav   */
58 	/* PA29 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 TxSOC  */
59 	/* PA28 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 RxENB */
60 	/* PA27 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 RxSOC */
61 	/* PA26 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 RxClav */
62 	/* PA25 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[0] */
63 	/* PA24 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[1] */
64 	/* PA23 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[2] */
65 	/* PA22 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[3] */
66 	/* PA21 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[4] */
67 	/* PA20 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[5] */
68 	/* PA19 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[6] */
69 	/* PA18 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[7] */
70 	/* PA17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[7] */
71 	/* PA16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[6] */
72 	/* PA15 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[5] */
73 	/* PA14 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[4] */
74 	/* PA13 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[3] */
75 	/* PA12 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[2] */
76 	/* PA11 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[1] */
77 	/* PA10 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[0] */
78 	/* PA9  */ {   0,   1,   1,   1,   0,   0   }, /* FCC1 L1TXD */
79 	/* PA8  */ {   0,   1,   1,   0,   0,   0   }, /* FCC1 L1RXD */
80 	/* PA7  */ {   0,   0,   0,   1,   0,   0   }, /* PA7 */
81 	/* PA6  */ {   0,   1,   1,   1,   0,   0   }, /* TDM A1 L1RSYNC */
82 	/* PA5  */ {   0,   0,   0,   1,   0,   0   }, /* PA5 */
83 	/* PA4  */ {   0,   0,   0,   1,   0,   0   }, /* PA4 */
84 	/* PA3  */ {   0,   0,   0,   1,   0,   0   }, /* PA3 */
85 	/* PA2  */ {   0,   0,   0,   1,   0,   0   }, /* PA2 */
86 	/* PA1  */ {   1,   0,   0,   0,   0,   0   }, /* FREERUN */
87 	/* PA0  */ {   0,   0,   0,   1,   0,   0   }  /* PA0 */
88     },
89 
90     /* Port B configuration */
91     {   /*            conf ppar psor pdir podr pdat */
92 	/* PB31 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TX_ER */
93 	/* PB30 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_DV */
94 	/* PB29 */ {   1,   1,   1,   1,   0,   0   }, /* FCC2 MII TX_EN */
95 	/* PB28 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_ER */
96 	/* PB27 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII COL */
97 	/* PB26 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII CRS */
98 	/* PB25 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[3] */
99 	/* PB24 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[2] */
100 	/* PB23 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[1] */
101 	/* PB22 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[0] */
102 	/* PB21 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[0] */
103 	/* PB20 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[1] */
104 	/* PB19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[2] */
105 	/* PB18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[3] */
106 	/* PB17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RX_DIV */
107 	/* PB16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RX_ERR */
108 	/* PB15 */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TX_ERR */
109 	/* PB14 */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TX_EN */
110 	/* PB13 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:COL */
111 	/* PB12 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:CRS */
112 	/* PB11 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
113 	/* PB10 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
114 	/* PB9  */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
115 	/* PB8  */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
116 	/* PB7  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
117 	/* PB6  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
118 	/* PB5  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
119 	/* PB4  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
120 	/* PB3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
121 	/* PB2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
122 	/* PB1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
123 	/* PB0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
124     },
125 
126     /* Port C */
127     {   /*            conf ppar psor pdir podr pdat */
128 	/* PC31 */ {   0,   0,   0,   1,   0,   0   }, /* PC31 */
129 	/* PC30 */ {   0,   0,   0,   1,   0,   0   }, /* PC30 */
130 	/* PC29 */ {   0,   1,   1,   0,   0,   0   }, /* SCC1 EN *CLSN */
131 	/* PC28 */ {   0,   0,   0,   1,   0,   0   }, /* PC28 */
132 	/* PC27 */ {   0,   0,   0,   1,   0,   0   }, /* UART Clock in */
133 	/* PC26 */ {   0,   0,   0,   1,   0,   0   }, /* PC26 */
134 	/* PC25 */ {   0,   0,   0,   1,   0,   0   }, /* PC25 */
135 	/* PC24 */ {   0,   0,   0,   1,   0,   0   }, /* PC24 */
136 	/* PC23 */ {   0,   1,   0,   1,   0,   0   }, /* ATMTFCLK */
137 	/* PC22 */ {   0,   1,   0,   0,   0,   0   }, /* ATMRFCLK */
138 	/* PC21 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN RXCLK */
139 	/* PC20 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN TXCLK */
140 	/* PC19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_CLK CLK13 */
141 	/* PC18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK14) */
142 	/* PC17 */ {   0,   0,   0,   1,   0,   0   }, /* PC17 */
143 	/* PC16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK16) */
144 	/* PC15 */ {   1,   1,   0,   0,   0,   0   }, /* PC15 */
145 	/* PC14 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN *CD */
146 	/* PC13 */ {   0,   0,   0,   1,   0,   0   }, /* PC13 */
147 	/* PC12 */ {   0,   1,   0,   1,   0,   0   }, /* PC12 */
148 	/* PC11 */ {   0,   0,   0,   1,   0,   0   }, /* LXT971 transmit control */
149 	/* PC10 */ {   1,   0,   0,   1,   0,   0   }, /* FETHMDC */
150 	/* PC9  */ {   1,   0,   0,   0,   0,   0   }, /* FETHMDIO */
151 	/* PC8  */ {   0,   0,   0,   1,   0,   0   }, /* PC8 */
152 	/* PC7  */ {   0,   0,   0,   1,   0,   0   }, /* PC7 */
153 	/* PC6  */ {   0,   0,   0,   1,   0,   0   }, /* PC6 */
154 	/* PC5  */ {   0,   0,   0,   1,   0,   0   }, /* PC5 */
155 	/* PC4  */ {   0,   0,   0,   1,   0,   0   }, /* PC4 */
156 	/* PC3  */ {   0,   0,   0,   1,   0,   0   }, /* PC3 */
157 	/* PC2  */ {   0,   0,   0,   1,   0,   1   }, /* ENET FDE */
158 	/* PC1  */ {   0,   0,   0,   1,   0,   0   }, /* ENET DSQE */
159 	/* PC0  */ {   0,   0,   0,   1,   0,   0   }, /* ENET LBK */
160     },
161 
162     /* Port D */
163     {   /*            conf ppar psor pdir podr pdat */
164 	/* PD31 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN RxD */
165 	/* PD30 */ {   1,   1,   1,   1,   0,   0   }, /* SCC1 EN TxD */
166 	/* PD29 */ {   1,   1,   0,   1,   0,   0   }, /* SCC1 EN TENA */
167 	/* PD28 */ {   0,   1,   0,   0,   0,   0   }, /* PD28 */
168 	/* PD27 */ {   0,   1,   1,   1,   0,   0   }, /* PD27 */
169 	/* PD26 */ {   0,   0,   0,   1,   0,   0   }, /* PD26 */
170 	/* PD25 */ {   0,   0,   0,   1,   0,   0   }, /* PD25 */
171 	/* PD24 */ {   0,   0,   0,   1,   0,   0   }, /* PD24 */
172 	/* PD23 */ {   0,   0,   0,   1,   0,   0   }, /* PD23 */
173 	/* PD22 */ {   0,   0,   0,   1,   0,   0   }, /* PD22 */
174 	/* PD21 */ {   0,   0,   0,   1,   0,   0   }, /* PD21 */
175 	/* PD20 */ {   0,   0,   0,   1,   0,   0   }, /* PD20 */
176 	/* PD19 */ {   0,   0,   0,   1,   0,   0   }, /* PD19 */
177 	/* PD18 */ {   0,   0,   0,   1,   0,   0   }, /* PD18 */
178 	/* PD17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXPRTY */
179 	/* PD16 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXPRTY */
180 	/* PD15 */ {   0,   1,   1,   0,   1,   0   }, /* I2C SDA */
181 	/* PD14 */ {   0,   0,   0,   1,   0,   0   }, /* LED */
182 	/* PD13 */ {   0,   0,   0,   0,   0,   0   }, /* PD13 */
183 	/* PD12 */ {   0,   0,   0,   0,   0,   0   }, /* PD12 */
184 	/* PD11 */ {   0,   0,   0,   0,   0,   0   }, /* PD11 */
185 	/* PD10 */ {   0,   0,   0,   0,   0,   0   }, /* PD10 */
186 	/* PD9  */ {   0,   1,   0,   1,   0,   0   }, /* SMC1 TXD */
187 	/* PD8  */ {   0,   1,   0,   0,   0,   0   }, /* SMC1 RXD */
188 	/* PD7  */ {   0,   0,   0,   1,   0,   1   }, /* PD7 */
189 	/* PD6  */ {   0,   0,   0,   1,   0,   1   }, /* PD6 */
190 	/* PD5  */ {   0,   0,   0,   1,   0,   1   }, /* PD5 */
191 	/* PD4  */ {   0,   0,   0,   1,   0,   1   }, /* PD4 */
192 	/* PD3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
193 	/* PD2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
194 	/* PD1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
195 	/* PD0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
196     }
197 };
198 
199 int checkboard (void)
200 {
201 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
202 
203 	/* PCI slot in USER bits CSR[6:7] by convention. */
204 	uint pci_slot = get_pci_slot ();
205 
206 	uint pci_dual = get_pci_dual ();	/* PCI DUAL in CM_PCI[3] */
207 	uint pci1_32 = gur->pordevsr & 0x10000;	/* PORDEVSR[15] */
208 	uint pci1_clk_sel = gur->porpllsr & 0x8000;	/* PORPLLSR[16] */
209 	uint pci2_clk_sel = gur->porpllsr & 0x4000;	/* PORPLLSR[17] */
210 
211 	uint pci1_speed = get_clock_freq ();	/* PCI PSPEED in [4:5] */
212 
213 	uint cpu_board_rev = get_cpu_board_revision ();
214 
215 	printf ("Board: CDS Version 0x%02x, PCI Slot %d\n",
216 		get_board_version (), pci_slot);
217 
218 	printf ("CPU Board Revision %d.%d (0x%04x)\n",
219 		MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev),
220 		MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev);
221 
222 	printf ("    PCI1: %d bit, %s MHz, %s\n",
223 		(pci1_32) ? 32 : 64,
224 		(pci1_speed == 33000000) ? "33" :
225 		(pci1_speed == 66000000) ? "66" : "unknown",
226 		pci1_clk_sel ? "sync" : "async");
227 
228 	if (pci_dual) {
229 		printf ("    PCI2: 32 bit, 66 MHz, %s\n",
230 			pci2_clk_sel ? "sync" : "async");
231 	} else {
232 		printf ("    PCI2: disabled\n");
233 	}
234 
235 	/*
236 	 * Initialize local bus.
237 	 */
238 	local_bus_init ();
239 
240 	return 0;
241 }
242 
243 phys_size_t
244 initdram(int board_type)
245 {
246 	long dram_size = 0;
247 
248 	puts("Initializing\n");
249 
250 #if defined(CONFIG_DDR_DLL)
251 	{
252 		/*
253 		 * Work around to stabilize DDR DLL MSYNC_IN.
254 		 * Errata DDR9 seems to have been fixed.
255 		 * This is now the workaround for Errata DDR11:
256 		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
257 		 */
258 
259 		volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
260 
261 		gur->ddrdllcr = 0x81000000;
262 		asm("sync;isync;msync");
263 		udelay(200);
264 	}
265 #endif
266 
267 	dram_size = fsl_ddr_sdram();
268 	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
269 	dram_size *= 0x100000;
270 
271 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
272 	/*
273 	 * Initialize and enable DDR ECC.
274 	 */
275 	ddr_enable_ecc(dram_size);
276 #endif
277 
278 	/*
279 	 * SDRAM Initialization
280 	 */
281 	sdram_init();
282 
283 	puts("    DDR: ");
284 	return dram_size;
285 }
286 
287 /*
288  * Initialize Local Bus
289  */
290 void
291 local_bus_init(void)
292 {
293 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
294 	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
295 
296 	uint clkdiv;
297 	uint lbc_hz;
298 	sys_info_t sysinfo;
299 	uint temp_lbcdll;
300 
301 	/*
302 	 * Errata LBC11.
303 	 * Fix Local Bus clock glitch when DLL is enabled.
304 	 *
305 	 * If localbus freq is < 66MHz, DLL bypass mode must be used.
306 	 * If localbus freq is > 133MHz, DLL can be safely enabled.
307 	 * Between 66 and 133, the DLL is enabled with an override workaround.
308 	 */
309 
310 	get_sys_info(&sysinfo);
311 	clkdiv = lbc->lcrr & LCRR_CLKDIV;
312 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
313 
314 	if (lbc_hz < 66) {
315 		lbc->lcrr |= 0x80000000;	/* DLL Bypass */
316 
317 	} else if (lbc_hz >= 133) {
318 		lbc->lcrr &= (~0x80000000);		/* DLL Enabled */
319 
320 	} else {
321 		lbc->lcrr &= (~0x8000000);	/* DLL Enabled */
322 		udelay(200);
323 
324 		/*
325 		 * Sample LBC DLL ctrl reg, upshift it to set the
326 		 * override bits.
327 		 */
328 		temp_lbcdll = gur->lbcdllcr;
329 		gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000);
330 		asm("sync;isync;msync");
331 	}
332 }
333 
334 /*
335  * Initialize SDRAM memory on the Local Bus.
336  */
337 void
338 sdram_init(void)
339 {
340 #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
341 
342 	uint idx;
343 	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
344 	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
345 	uint cpu_board_rev;
346 	uint lsdmr_common;
347 
348 	puts("    SDRAM: ");
349 
350 	print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
351 
352 	/*
353 	 * Setup SDRAM Base and Option Registers
354 	 */
355 	set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
356 	set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
357 	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
358 	asm("msync");
359 
360 	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
361 	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
362 	asm("msync");
363 
364 	/*
365 	 * Determine which address lines to use baed on CPU board rev.
366 	 */
367 	cpu_board_rev = get_cpu_board_revision();
368 	lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON;
369 	if (cpu_board_rev == MPC85XX_CPU_BOARD_REV_1_0) {
370 		lsdmr_common |= LSDMR_BSMA1617;
371 	} else if (cpu_board_rev == MPC85XX_CPU_BOARD_REV_1_1) {
372 		lsdmr_common |= LSDMR_BSMA1516;
373 	} else {
374 		/*
375 		 * Assume something unable to identify itself is
376 		 * really old, and likely has lines 16/17 mapped.
377 		 */
378 		lsdmr_common |= LSDMR_BSMA1617;
379 	}
380 
381 	/*
382 	 * Issue PRECHARGE ALL command.
383 	 */
384 	lbc->lsdmr = lsdmr_common | LSDMR_OP_PCHALL;
385 	asm("sync;msync");
386 	*sdram_addr = 0xff;
387 	ppcDcbf((unsigned long) sdram_addr);
388 	udelay(100);
389 
390 	/*
391 	 * Issue 8 AUTO REFRESH commands.
392 	 */
393 	for (idx = 0; idx < 8; idx++) {
394 		lbc->lsdmr = lsdmr_common | LSDMR_OP_ARFRSH;
395 		asm("sync;msync");
396 		*sdram_addr = 0xff;
397 		ppcDcbf((unsigned long) sdram_addr);
398 		udelay(100);
399 	}
400 
401 	/*
402 	 * Issue 8 MODE-set command.
403 	 */
404 	lbc->lsdmr = lsdmr_common | LSDMR_OP_MRW;
405 	asm("sync;msync");
406 	*sdram_addr = 0xff;
407 	ppcDcbf((unsigned long) sdram_addr);
408 	udelay(100);
409 
410 	/*
411 	 * Issue NORMAL OP command.
412 	 */
413 	lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL;
414 	asm("sync;msync");
415 	*sdram_addr = 0xff;
416 	ppcDcbf((unsigned long) sdram_addr);
417 	udelay(200);    /* Overkill. Must wait > 200 bus cycles */
418 
419 #endif	/* enable SDRAM init */
420 }
421 
422 #ifdef CONFIG_PCI
423 /* For some reason the Tundra PCI bridge shows up on itself as a
424  * different device.  Work around that by refusing to configure it
425  */
426 void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab) { }
427 
428 static struct pci_config_table pci_mpc85xxcds_config_table[] = {
429 	{0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
430 	{0x1106, 0x0686, PCI_ANY_ID, 1, VIA_ID, 0, mpc85xx_config_via, {0,0,0}},
431 	{0x1106, 0x0571, PCI_ANY_ID, 1, VIA_ID, 1,
432 		mpc85xx_config_via_usbide, {0,0,0}},
433 	{0x1105, 0x3038, PCI_ANY_ID, 1, VIA_ID, 2,
434 		mpc85xx_config_via_usb, {0,0,0}},
435 	{0x1106, 0x3038, PCI_ANY_ID, 1, VIA_ID, 3,
436 		mpc85xx_config_via_usb2, {0,0,0}},
437 	{0x1106, 0x3058, PCI_ANY_ID, 1, VIA_ID, 5,
438 		mpc85xx_config_via_power, {0,0,0}},
439 	{0x1106, 0x3068, PCI_ANY_ID, 1, VIA_ID, 6,
440 		mpc85xx_config_via_ac97, {0,0,0}},
441 	{},
442 };
443 
444 
445 static struct pci_controller hose[] = {
446 	{
447 	config_table: pci_mpc85xxcds_config_table,
448 	},
449 #ifdef CONFIG_MPC85XX_PCI2
450 	{},
451 #endif
452 };
453 
454 #endif
455 
456 void
457 pci_init_board(void)
458 {
459 #ifdef CONFIG_PCI
460 	pci_mpc85xx_init(hose);
461 #endif
462 }
463 
464 #if defined(CONFIG_OF_BOARD_SETUP)
465 void
466 ft_pci_setup(void *blob, bd_t *bd)
467 {
468 	int node, tmp[2];
469 	const char *path;
470 
471 	node = fdt_path_offset(blob, "/aliases");
472 	tmp[0] = 0;
473 	if (node >= 0) {
474 #ifdef CONFIG_PCI1
475 		path = fdt_getprop(blob, node, "pci0", NULL);
476 		if (path) {
477 			tmp[1] = hose[0].last_busno - hose[0].first_busno;
478 			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
479 		}
480 #endif
481 #ifdef CONFIG_MPC85XX_PCI2
482 		path = fdt_getprop(blob, node, "pci1", NULL);
483 		if (path) {
484 			tmp[1] = hose[1].last_busno - hose[1].first_busno;
485 			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
486 		}
487 #endif
488 	}
489 }
490 #endif
491