1 /* 2 * Copyright 2004, 2007, 2009-2011 Freescale Semiconductor, Inc. 3 * 4 * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #include <common.h> 10 #include <pci.h> 11 #include <asm/processor.h> 12 #include <asm/mmu.h> 13 #include <asm/immap_85xx.h> 14 #include <asm/fsl_pci.h> 15 #include <fsl_ddr_sdram.h> 16 #include <asm/fsl_serdes.h> 17 #include <miiphy.h> 18 #include <linux/libfdt.h> 19 #include <fdt_support.h> 20 #include <tsec.h> 21 #include <fsl_mdio.h> 22 #include <netdev.h> 23 24 #include "../common/cadmus.h" 25 #include "../common/eeprom.h" 26 #include "../common/via.h" 27 28 void local_bus_init(void); 29 30 int checkboard (void) 31 { 32 volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 33 volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); 34 35 /* PCI slot in USER bits CSR[6:7] by convention. */ 36 uint pci_slot = get_pci_slot (); 37 38 uint cpu_board_rev = get_cpu_board_revision (); 39 40 puts("Board: MPC8548CDS"); 41 printf(" Carrier Rev: 0x%02x, PCI Slot %d\n", 42 get_board_version(), pci_slot); 43 printf(" Daughtercard Rev: %d.%d (0x%04x)\n", 44 MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev), 45 MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev); 46 /* 47 * Initialize local bus. 48 */ 49 local_bus_init (); 50 51 /* 52 * Hack TSEC 3 and 4 IO voltages. 53 */ 54 gur->tsec34ioovcr = 0xe7e0; /* 1110 0111 1110 0xxx */ 55 56 ecm->eedr = 0xffffffff; /* clear ecm errors */ 57 ecm->eeer = 0xffffffff; /* enable ecm errors */ 58 return 0; 59 } 60 61 /* 62 * Initialize Local Bus 63 */ 64 void 65 local_bus_init(void) 66 { 67 volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 68 volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; 69 70 uint clkdiv; 71 sys_info_t sysinfo; 72 73 get_sys_info(&sysinfo); 74 clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2; 75 76 gur->lbiuiplldcr1 = 0x00078080; 77 if (clkdiv == 16) { 78 gur->lbiuiplldcr0 = 0x7c0f1bf0; 79 } else if (clkdiv == 8) { 80 gur->lbiuiplldcr0 = 0x6c0f1bf0; 81 } else if (clkdiv == 4) { 82 gur->lbiuiplldcr0 = 0x5c0f1bf0; 83 } 84 85 lbc->lcrr |= 0x00030000; 86 87 asm("sync;isync;msync"); 88 89 lbc->ltesr = 0xffffffff; /* Clear LBC error interrupts */ 90 lbc->lteir = 0xffffffff; /* Enable LBC error interrupts */ 91 } 92 93 /* 94 * Initialize SDRAM memory on the Local Bus. 95 */ 96 void lbc_sdram_init(void) 97 { 98 #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) 99 100 uint idx; 101 volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; 102 uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; 103 uint lsdmr_common; 104 105 puts("LBC SDRAM: "); 106 print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, 107 "\n"); 108 109 /* 110 * Setup SDRAM Base and Option Registers 111 */ 112 set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); 113 set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); 114 lbc->lbcr = CONFIG_SYS_LBC_LBCR; 115 asm("msync"); 116 117 lbc->lsrt = CONFIG_SYS_LBC_LSRT; 118 lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; 119 asm("msync"); 120 121 /* 122 * MPC8548 uses "new" 15-16 style addressing. 123 */ 124 lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON; 125 lsdmr_common |= LSDMR_BSMA1516; 126 127 /* 128 * Issue PRECHARGE ALL command. 129 */ 130 lbc->lsdmr = lsdmr_common | LSDMR_OP_PCHALL; 131 asm("sync;msync"); 132 *sdram_addr = 0xff; 133 ppcDcbf((unsigned long) sdram_addr); 134 udelay(100); 135 136 /* 137 * Issue 8 AUTO REFRESH commands. 138 */ 139 for (idx = 0; idx < 8; idx++) { 140 lbc->lsdmr = lsdmr_common | LSDMR_OP_ARFRSH; 141 asm("sync;msync"); 142 *sdram_addr = 0xff; 143 ppcDcbf((unsigned long) sdram_addr); 144 udelay(100); 145 } 146 147 /* 148 * Issue 8 MODE-set command. 149 */ 150 lbc->lsdmr = lsdmr_common | LSDMR_OP_MRW; 151 asm("sync;msync"); 152 *sdram_addr = 0xff; 153 ppcDcbf((unsigned long) sdram_addr); 154 udelay(100); 155 156 /* 157 * Issue NORMAL OP command. 158 */ 159 lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL; 160 asm("sync;msync"); 161 *sdram_addr = 0xff; 162 ppcDcbf((unsigned long) sdram_addr); 163 udelay(200); /* Overkill. Must wait > 200 bus cycles */ 164 165 #endif /* enable SDRAM init */ 166 } 167 168 #if defined(CONFIG_PCI) || defined(CONFIG_PCI1) 169 /* For some reason the Tundra PCI bridge shows up on itself as a 170 * different device. Work around that by refusing to configure it. 171 */ 172 void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab) { } 173 174 static struct pci_config_table pci_mpc85xxcds_config_table[] = { 175 {0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}}, 176 {0x1106, 0x0686, PCI_ANY_ID, 1, VIA_ID, 0, mpc85xx_config_via, {0,0,0}}, 177 {0x1106, 0x0571, PCI_ANY_ID, 1, VIA_ID, 1, 178 mpc85xx_config_via_usbide, {0,0,0}}, 179 {0x1105, 0x3038, PCI_ANY_ID, 1, VIA_ID, 2, 180 mpc85xx_config_via_usb, {0,0,0}}, 181 {0x1106, 0x3038, PCI_ANY_ID, 1, VIA_ID, 3, 182 mpc85xx_config_via_usb2, {0,0,0}}, 183 {0x1106, 0x3058, PCI_ANY_ID, 1, VIA_ID, 5, 184 mpc85xx_config_via_power, {0,0,0}}, 185 {0x1106, 0x3068, PCI_ANY_ID, 1, VIA_ID, 6, 186 mpc85xx_config_via_ac97, {0,0,0}}, 187 {}, 188 }; 189 190 static struct pci_controller pci1_hose; 191 #endif /* CONFIG_PCI */ 192 193 void pci_init_board(void) 194 { 195 volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 196 struct fsl_pci_info pci_info; 197 u32 devdisr, pordevsr, io_sel; 198 u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel; 199 int first_free_busno = 0; 200 char buf[32]; 201 202 devdisr = in_be32(&gur->devdisr); 203 pordevsr = in_be32(&gur->pordevsr); 204 porpllsr = in_be32(&gur->porpllsr); 205 io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; 206 207 debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel); 208 209 #ifdef CONFIG_PCI1 210 pci_speed = get_clock_freq (); /* PCI PSPEED in [4:5] */ 211 pci_32 = pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32; /* PORDEVSR[15] */ 212 pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; 213 pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; 214 215 if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { 216 SET_STD_PCI_INFO(pci_info, 1); 217 set_next_law(pci_info.mem_phys, 218 law_size_bits(pci_info.mem_size), pci_info.law); 219 set_next_law(pci_info.io_phys, 220 law_size_bits(pci_info.io_size), pci_info.law); 221 222 pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs); 223 printf("PCI1: %d bit, %s MHz, %s, %s, %s (base address %lx)\n", 224 (pci_32) ? 32 : 64, 225 strmhz(buf, pci_speed), 226 pci_clk_sel ? "sync" : "async", 227 pci_agent ? "agent" : "host", 228 pci_arb ? "arbiter" : "external-arbiter", 229 pci_info.regs); 230 231 pci1_hose.config_table = pci_mpc85xxcds_config_table; 232 first_free_busno = fsl_pci_init_port(&pci_info, 233 &pci1_hose, first_free_busno); 234 235 #ifdef CONFIG_PCIX_CHECK 236 if (!(pordevsr & MPC85xx_PORDEVSR_PCI1)) { 237 /* PCI-X init */ 238 if (CONFIG_SYS_CLK_FREQ < 66000000) 239 printf("PCI-X will only work at 66 MHz\n"); 240 241 reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ 242 | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E; 243 pci_hose_write_config_word(hose, bus, PCIX_COMMAND, reg16); 244 } 245 #endif 246 } else { 247 printf("PCI1: disabled\n"); 248 } 249 250 puts("\n"); 251 #else 252 setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */ 253 #endif 254 255 #ifdef CONFIG_PCI2 256 { 257 uint pci2_clk_sel = porpllsr & 0x4000; /* PORPLLSR[17] */ 258 uint pci_dual = get_pci_dual (); /* PCI DUAL in CM_PCI[3] */ 259 if (pci_dual) { 260 printf("PCI2: 32 bit, 66 MHz, %s\n", 261 pci2_clk_sel ? "sync" : "async"); 262 } else { 263 printf("PCI2: disabled\n"); 264 } 265 } 266 #else 267 setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI2); /* disable */ 268 #endif /* CONFIG_PCI2 */ 269 270 fsl_pcie_init_board(first_free_busno); 271 } 272 273 void configure_rgmii(void) 274 { 275 unsigned short temp; 276 277 /* Change the resistors for the PHY */ 278 /* This is needed to get the RGMII working for the 1.3+ 279 * CDS cards */ 280 if (get_board_version() == 0x13) { 281 miiphy_write(DEFAULT_MII_NAME, 282 TSEC1_PHY_ADDR, 29, 18); 283 284 miiphy_read(DEFAULT_MII_NAME, 285 TSEC1_PHY_ADDR, 30, &temp); 286 287 temp = (temp & 0xf03f); 288 temp |= 2 << 9; /* 36 ohm */ 289 temp |= 2 << 6; /* 39 ohm */ 290 291 miiphy_write(DEFAULT_MII_NAME, 292 TSEC1_PHY_ADDR, 30, temp); 293 294 miiphy_write(DEFAULT_MII_NAME, 295 TSEC1_PHY_ADDR, 29, 3); 296 297 miiphy_write(DEFAULT_MII_NAME, 298 TSEC1_PHY_ADDR, 30, 0x8000); 299 } 300 301 return; 302 } 303 304 int board_eth_init(bd_t *bis) 305 { 306 #ifdef CONFIG_TSEC_ENET 307 struct fsl_pq_mdio_info mdio_info; 308 struct tsec_info_struct tsec_info[4]; 309 int num = 0; 310 311 #ifdef CONFIG_TSEC1 312 SET_STD_TSEC_INFO(tsec_info[num], 1); 313 num++; 314 #endif 315 #ifdef CONFIG_TSEC2 316 SET_STD_TSEC_INFO(tsec_info[num], 2); 317 num++; 318 #endif 319 #ifdef CONFIG_TSEC3 320 /* initialize TSEC3 only if Carrier is 1.3 or above on CDS */ 321 if (get_board_version() >= 0x13) { 322 SET_STD_TSEC_INFO(tsec_info[num], 3); 323 tsec_info[num].interface = PHY_INTERFACE_MODE_RGMII_ID; 324 num++; 325 } 326 #endif 327 #ifdef CONFIG_TSEC4 328 /* initialize TSEC4 only if Carrier is 1.3 or above on CDS */ 329 if (get_board_version() >= 0x13) { 330 SET_STD_TSEC_INFO(tsec_info[num], 4); 331 tsec_info[num].interface = PHY_INTERFACE_MODE_RGMII_ID; 332 num++; 333 } 334 #endif 335 336 if (!num) { 337 printf("No TSECs initialized\n"); 338 339 return 0; 340 } 341 342 mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; 343 mdio_info.name = DEFAULT_MII_NAME; 344 fsl_pq_mdio_init(bis, &mdio_info); 345 346 tsec_eth_init(bis, tsec_info, num); 347 configure_rgmii(); 348 #endif 349 350 return pci_eth_init(bis); 351 } 352 353 #if defined(CONFIG_OF_BOARD_SETUP) 354 void ft_pci_setup(void *blob, bd_t *bd) 355 { 356 FT_FSL_PCI_SETUP; 357 } 358 #endif 359