1 /*
2  * Copyright 2004, 2007, 2009-2011 Freescale Semiconductor, Inc.
3  *
4  * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #include <common.h>
10 #include <pci.h>
11 #include <asm/processor.h>
12 #include <asm/mmu.h>
13 #include <asm/immap_85xx.h>
14 #include <asm/fsl_pci.h>
15 #include <fsl_ddr_sdram.h>
16 #include <asm/fsl_serdes.h>
17 #include <miiphy.h>
18 #include <linux/libfdt.h>
19 #include <fdt_support.h>
20 #include <tsec.h>
21 #include <fsl_mdio.h>
22 #include <netdev.h>
23 
24 #include "../common/cadmus.h"
25 #include "../common/eeprom.h"
26 #include "../common/via.h"
27 
28 void local_bus_init(void);
29 
30 int checkboard (void)
31 {
32 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
33 	volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
34 
35 	/* PCI slot in USER bits CSR[6:7] by convention. */
36 	uint pci_slot = get_pci_slot ();
37 
38 	uint cpu_board_rev = get_cpu_board_revision ();
39 
40 	puts("Board: MPC8548CDS");
41 	printf(" Carrier Rev: 0x%02x, PCI Slot %d\n",
42 			get_board_version(), pci_slot);
43 	printf("       Daughtercard Rev: %d.%d (0x%04x)\n",
44 		MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev),
45 		MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev);
46 	/*
47 	 * Initialize local bus.
48 	 */
49 	local_bus_init ();
50 
51 	/*
52 	 * Hack TSEC 3 and 4 IO voltages.
53 	 */
54 	gur->tsec34ioovcr = 0xe7e0;	/*  1110 0111 1110 0xxx */
55 
56 	ecm->eedr = 0xffffffff;		/* clear ecm errors */
57 	ecm->eeer = 0xffffffff;		/* enable ecm errors */
58 	return 0;
59 }
60 
61 /*
62  * Initialize Local Bus
63  */
64 void
65 local_bus_init(void)
66 {
67 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
68 	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
69 
70 	uint clkdiv;
71 	sys_info_t sysinfo;
72 
73 	get_sys_info(&sysinfo);
74 	clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;
75 
76 	gur->lbiuiplldcr1 = 0x00078080;
77 	if (clkdiv == 16) {
78 		gur->lbiuiplldcr0 = 0x7c0f1bf0;
79 	} else if (clkdiv == 8) {
80 		gur->lbiuiplldcr0 = 0x6c0f1bf0;
81 	} else if (clkdiv == 4) {
82 		gur->lbiuiplldcr0 = 0x5c0f1bf0;
83 	}
84 
85 	lbc->lcrr |= 0x00030000;
86 
87 	asm("sync;isync;msync");
88 
89 	lbc->ltesr = 0xffffffff;	/* Clear LBC error interrupts */
90 	lbc->lteir = 0xffffffff;	/* Enable LBC error interrupts */
91 }
92 
93 /*
94  * Initialize SDRAM memory on the Local Bus.
95  */
96 void lbc_sdram_init(void)
97 {
98 #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
99 
100 	uint idx;
101 	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
102 	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
103 	uint lsdmr_common;
104 
105 	puts("LBC SDRAM: ");
106 	print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024,
107 		   "\n");
108 
109 	/*
110 	 * Setup SDRAM Base and Option Registers
111 	 */
112 	set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
113 	set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
114 	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
115 	asm("msync");
116 
117 	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
118 	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
119 	asm("msync");
120 
121 	/*
122 	 * MPC8548 uses "new" 15-16 style addressing.
123 	 */
124 	lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON;
125 	lsdmr_common |= LSDMR_BSMA1516;
126 
127 	/*
128 	 * Issue PRECHARGE ALL command.
129 	 */
130 	lbc->lsdmr = lsdmr_common | LSDMR_OP_PCHALL;
131 	asm("sync;msync");
132 	*sdram_addr = 0xff;
133 	ppcDcbf((unsigned long) sdram_addr);
134 	udelay(100);
135 
136 	/*
137 	 * Issue 8 AUTO REFRESH commands.
138 	 */
139 	for (idx = 0; idx < 8; idx++) {
140 		lbc->lsdmr = lsdmr_common | LSDMR_OP_ARFRSH;
141 		asm("sync;msync");
142 		*sdram_addr = 0xff;
143 		ppcDcbf((unsigned long) sdram_addr);
144 		udelay(100);
145 	}
146 
147 	/*
148 	 * Issue 8 MODE-set command.
149 	 */
150 	lbc->lsdmr = lsdmr_common | LSDMR_OP_MRW;
151 	asm("sync;msync");
152 	*sdram_addr = 0xff;
153 	ppcDcbf((unsigned long) sdram_addr);
154 	udelay(100);
155 
156 	/*
157 	 * Issue NORMAL OP command.
158 	 */
159 	lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL;
160 	asm("sync;msync");
161 	*sdram_addr = 0xff;
162 	ppcDcbf((unsigned long) sdram_addr);
163 	udelay(200);    /* Overkill. Must wait > 200 bus cycles */
164 
165 #endif	/* enable SDRAM init */
166 }
167 
168 #if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
169 /* For some reason the Tundra PCI bridge shows up on itself as a
170  * different device.  Work around that by refusing to configure it.
171  */
172 void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab) { }
173 
174 static struct pci_config_table pci_mpc85xxcds_config_table[] = {
175 	{0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
176 	{0x1106, 0x0686, PCI_ANY_ID, 1, VIA_ID, 0, mpc85xx_config_via, {0,0,0}},
177 	{0x1106, 0x0571, PCI_ANY_ID, 1, VIA_ID, 1,
178 		mpc85xx_config_via_usbide, {0,0,0}},
179 	{0x1105, 0x3038, PCI_ANY_ID, 1, VIA_ID, 2,
180 		mpc85xx_config_via_usb, {0,0,0}},
181 	{0x1106, 0x3038, PCI_ANY_ID, 1, VIA_ID, 3,
182 		mpc85xx_config_via_usb2, {0,0,0}},
183 	{0x1106, 0x3058, PCI_ANY_ID, 1, VIA_ID, 5,
184 		mpc85xx_config_via_power, {0,0,0}},
185 	{0x1106, 0x3068, PCI_ANY_ID, 1, VIA_ID, 6,
186 		mpc85xx_config_via_ac97, {0,0,0}},
187 	{},
188 };
189 
190 static struct pci_controller pci1_hose;
191 #endif	/* CONFIG_PCI */
192 
193 void pci_init_board(void)
194 {
195 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
196 	struct fsl_pci_info pci_info;
197 	u32 devdisr, pordevsr, io_sel;
198 	u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel;
199 	int first_free_busno = 0;
200 	char buf[32];
201 
202 	devdisr = in_be32(&gur->devdisr);
203 	pordevsr = in_be32(&gur->pordevsr);
204 	porpllsr = in_be32(&gur->porpllsr);
205 	io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
206 
207 	debug ("   pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
208 
209 #ifdef CONFIG_PCI1
210 	pci_speed = get_clock_freq ();	/* PCI PSPEED in [4:5] */
211 	pci_32 = pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32;	/* PORDEVSR[15] */
212 	pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
213 	pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
214 
215 	if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
216 		SET_STD_PCI_INFO(pci_info, 1);
217 		set_next_law(pci_info.mem_phys,
218 			law_size_bits(pci_info.mem_size), pci_info.law);
219 		set_next_law(pci_info.io_phys,
220 			law_size_bits(pci_info.io_size), pci_info.law);
221 
222 		pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs);
223 		printf("PCI1: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
224 			(pci_32) ? 32 : 64,
225 			strmhz(buf, pci_speed),
226 			pci_clk_sel ? "sync" : "async",
227 			pci_agent ? "agent" : "host",
228 			pci_arb ? "arbiter" : "external-arbiter",
229 			pci_info.regs);
230 
231 		pci1_hose.config_table = pci_mpc85xxcds_config_table;
232 		first_free_busno = fsl_pci_init_port(&pci_info,
233 					&pci1_hose, first_free_busno);
234 
235 #ifdef CONFIG_PCIX_CHECK
236 		if (!(pordevsr & MPC85xx_PORDEVSR_PCI1)) {
237 			/* PCI-X init */
238 			if (CONFIG_SYS_CLK_FREQ < 66000000)
239 				printf("PCI-X will only work at 66 MHz\n");
240 
241 			reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
242 				| PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
243 			pci_hose_write_config_word(hose, bus, PCIX_COMMAND, reg16);
244 		}
245 #endif
246 	} else {
247 		printf("PCI1: disabled\n");
248 	}
249 
250 	puts("\n");
251 #else
252 	setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */
253 #endif
254 
255 #ifdef CONFIG_PCI2
256 {
257 	uint pci2_clk_sel = porpllsr & 0x4000;	/* PORPLLSR[17] */
258 	uint pci_dual = get_pci_dual ();	/* PCI DUAL in CM_PCI[3] */
259 	if (pci_dual) {
260 		printf("PCI2: 32 bit, 66 MHz, %s\n",
261 			pci2_clk_sel ? "sync" : "async");
262 	} else {
263 		printf("PCI2: disabled\n");
264 	}
265 }
266 #else
267 	setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI2); /* disable */
268 #endif /* CONFIG_PCI2 */
269 
270 	fsl_pcie_init_board(first_free_busno);
271 }
272 
273 void configure_rgmii(void)
274 {
275 	unsigned short temp;
276 
277 	/* Change the resistors for the PHY */
278 	/* This is needed to get the RGMII working for the 1.3+
279 	 * CDS cards */
280 	if (get_board_version() ==  0x13) {
281 		miiphy_write(DEFAULT_MII_NAME,
282 				TSEC1_PHY_ADDR, 29, 18);
283 
284 		miiphy_read(DEFAULT_MII_NAME,
285 				TSEC1_PHY_ADDR, 30, &temp);
286 
287 		temp = (temp & 0xf03f);
288 		temp |= 2 << 9;		/* 36 ohm */
289 		temp |= 2 << 6;		/* 39 ohm */
290 
291 		miiphy_write(DEFAULT_MII_NAME,
292 				TSEC1_PHY_ADDR, 30, temp);
293 
294 		miiphy_write(DEFAULT_MII_NAME,
295 				TSEC1_PHY_ADDR, 29, 3);
296 
297 		miiphy_write(DEFAULT_MII_NAME,
298 				TSEC1_PHY_ADDR, 30, 0x8000);
299 	}
300 
301 	return;
302 }
303 
304 int board_eth_init(bd_t *bis)
305 {
306 #ifdef CONFIG_TSEC_ENET
307 	struct fsl_pq_mdio_info mdio_info;
308 	struct tsec_info_struct tsec_info[4];
309 	int num = 0;
310 
311 #ifdef CONFIG_TSEC1
312 	SET_STD_TSEC_INFO(tsec_info[num], 1);
313 	num++;
314 #endif
315 #ifdef CONFIG_TSEC2
316 	SET_STD_TSEC_INFO(tsec_info[num], 2);
317 	num++;
318 #endif
319 #ifdef CONFIG_TSEC3
320 	/* initialize TSEC3 only if Carrier is 1.3 or above on CDS */
321 	if (get_board_version() >= 0x13) {
322 		SET_STD_TSEC_INFO(tsec_info[num], 3);
323 		tsec_info[num].interface = PHY_INTERFACE_MODE_RGMII_ID;
324 		num++;
325 	}
326 #endif
327 #ifdef CONFIG_TSEC4
328 	/* initialize TSEC4 only if Carrier is 1.3 or above on CDS */
329 	if (get_board_version() >= 0x13) {
330 		SET_STD_TSEC_INFO(tsec_info[num], 4);
331 		tsec_info[num].interface = PHY_INTERFACE_MODE_RGMII_ID;
332 		num++;
333 	}
334 #endif
335 
336 	if (!num) {
337 		printf("No TSECs initialized\n");
338 
339 		return 0;
340 	}
341 
342 	mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
343 	mdio_info.name = DEFAULT_MII_NAME;
344 	fsl_pq_mdio_init(bis, &mdio_info);
345 
346 	tsec_eth_init(bis, tsec_info, num);
347 	configure_rgmii();
348 #endif
349 
350 	return pci_eth_init(bis);
351 }
352 
353 #if defined(CONFIG_OF_BOARD_SETUP)
354 void ft_pci_setup(void *blob, bd_t *bd)
355 {
356 	FT_FSL_PCI_SETUP;
357 }
358 #endif
359