1 /* 2 * Copyright 2004, 2007, 200 Freescale Semiconductor, Inc. 3 * 4 * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> 5 * 6 * See file CREDITS for list of people who contributed to this 7 * project. 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of 12 * the License, or (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 22 * MA 02111-1307 USA 23 */ 24 25 #include <common.h> 26 #include <pci.h> 27 #include <asm/processor.h> 28 #include <asm/mmu.h> 29 #include <asm/immap_85xx.h> 30 #include <asm/fsl_pci.h> 31 #include <asm/fsl_ddr_sdram.h> 32 #include <spd_sdram.h> 33 #include <miiphy.h> 34 #include <libfdt.h> 35 #include <fdt_support.h> 36 37 #include "../common/cadmus.h" 38 #include "../common/eeprom.h" 39 #include "../common/via.h" 40 41 DECLARE_GLOBAL_DATA_PTR; 42 43 void local_bus_init(void); 44 void sdram_init(void); 45 46 int checkboard (void) 47 { 48 volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 49 volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); 50 51 /* PCI slot in USER bits CSR[6:7] by convention. */ 52 uint pci_slot = get_pci_slot (); 53 54 uint cpu_board_rev = get_cpu_board_revision (); 55 56 printf ("Board: CDS Version 0x%02x, PCI Slot %d\n", 57 get_board_version (), pci_slot); 58 59 printf ("CPU Board Revision %d.%d (0x%04x)\n", 60 MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev), 61 MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev); 62 /* 63 * Initialize local bus. 64 */ 65 local_bus_init (); 66 67 /* 68 * Hack TSEC 3 and 4 IO voltages. 69 */ 70 gur->tsec34ioovcr = 0xe7e0; /* 1110 0111 1110 0xxx */ 71 72 ecm->eedr = 0xffffffff; /* clear ecm errors */ 73 ecm->eeer = 0xffffffff; /* enable ecm errors */ 74 return 0; 75 } 76 77 phys_size_t 78 initdram(int board_type) 79 { 80 long dram_size = 0; 81 82 puts("Initializing\n"); 83 84 #if defined(CONFIG_DDR_DLL) 85 { 86 /* 87 * Work around to stabilize DDR DLL MSYNC_IN. 88 * Errata DDR9 seems to have been fixed. 89 * This is now the workaround for Errata DDR11: 90 * Override DLL = 1, Course Adj = 1, Tap Select = 0 91 */ 92 93 volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 94 95 gur->ddrdllcr = 0x81000000; 96 asm("sync;isync;msync"); 97 udelay(200); 98 } 99 #endif 100 101 dram_size = fsl_ddr_sdram(); 102 dram_size = setup_ddr_tlbs(dram_size / 0x100000); 103 dram_size *= 0x100000; 104 105 /* 106 * SDRAM Initialization 107 */ 108 sdram_init(); 109 110 puts(" DDR: "); 111 return dram_size; 112 } 113 114 /* 115 * Initialize Local Bus 116 */ 117 void 118 local_bus_init(void) 119 { 120 volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 121 volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); 122 123 uint clkdiv; 124 uint lbc_hz; 125 sys_info_t sysinfo; 126 127 get_sys_info(&sysinfo); 128 clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2; 129 lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; 130 131 gur->lbiuiplldcr1 = 0x00078080; 132 if (clkdiv == 16) { 133 gur->lbiuiplldcr0 = 0x7c0f1bf0; 134 } else if (clkdiv == 8) { 135 gur->lbiuiplldcr0 = 0x6c0f1bf0; 136 } else if (clkdiv == 4) { 137 gur->lbiuiplldcr0 = 0x5c0f1bf0; 138 } 139 140 lbc->lcrr |= 0x00030000; 141 142 asm("sync;isync;msync"); 143 144 lbc->ltesr = 0xffffffff; /* Clear LBC error interrupts */ 145 lbc->lteir = 0xffffffff; /* Enable LBC error interrupts */ 146 } 147 148 /* 149 * Initialize SDRAM memory on the Local Bus. 150 */ 151 void 152 sdram_init(void) 153 { 154 #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) 155 156 uint idx; 157 volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); 158 uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; 159 uint cpu_board_rev; 160 uint lsdmr_common; 161 162 puts(" SDRAM: "); 163 164 print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); 165 166 /* 167 * Setup SDRAM Base and Option Registers 168 */ 169 lbc->or2 = CONFIG_SYS_OR2_PRELIM; 170 asm("msync"); 171 172 lbc->br2 = CONFIG_SYS_BR2_PRELIM; 173 asm("msync"); 174 175 lbc->lbcr = CONFIG_SYS_LBC_LBCR; 176 asm("msync"); 177 178 179 lbc->lsrt = CONFIG_SYS_LBC_LSRT; 180 lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; 181 asm("msync"); 182 183 /* 184 * MPC8548 uses "new" 15-16 style addressing. 185 */ 186 cpu_board_rev = get_cpu_board_revision(); 187 lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON; 188 lsdmr_common |= LSDMR_BSMA1516; 189 190 /* 191 * Issue PRECHARGE ALL command. 192 */ 193 lbc->lsdmr = lsdmr_common | LSDMR_OP_PCHALL; 194 asm("sync;msync"); 195 *sdram_addr = 0xff; 196 ppcDcbf((unsigned long) sdram_addr); 197 udelay(100); 198 199 /* 200 * Issue 8 AUTO REFRESH commands. 201 */ 202 for (idx = 0; idx < 8; idx++) { 203 lbc->lsdmr = lsdmr_common | LSDMR_OP_ARFRSH; 204 asm("sync;msync"); 205 *sdram_addr = 0xff; 206 ppcDcbf((unsigned long) sdram_addr); 207 udelay(100); 208 } 209 210 /* 211 * Issue 8 MODE-set command. 212 */ 213 lbc->lsdmr = lsdmr_common | LSDMR_OP_MRW; 214 asm("sync;msync"); 215 *sdram_addr = 0xff; 216 ppcDcbf((unsigned long) sdram_addr); 217 udelay(100); 218 219 /* 220 * Issue NORMAL OP command. 221 */ 222 lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL; 223 asm("sync;msync"); 224 *sdram_addr = 0xff; 225 ppcDcbf((unsigned long) sdram_addr); 226 udelay(200); /* Overkill. Must wait > 200 bus cycles */ 227 228 #endif /* enable SDRAM init */ 229 } 230 231 #if defined(CONFIG_PCI) || defined(CONFIG_PCI1) 232 /* For some reason the Tundra PCI bridge shows up on itself as a 233 * different device. Work around that by refusing to configure it. 234 */ 235 void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab) { } 236 237 static struct pci_config_table pci_mpc85xxcds_config_table[] = { 238 {0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}}, 239 {0x1106, 0x0686, PCI_ANY_ID, 1, VIA_ID, 0, mpc85xx_config_via, {0,0,0}}, 240 {0x1106, 0x0571, PCI_ANY_ID, 1, VIA_ID, 1, 241 mpc85xx_config_via_usbide, {0,0,0}}, 242 {0x1105, 0x3038, PCI_ANY_ID, 1, VIA_ID, 2, 243 mpc85xx_config_via_usb, {0,0,0}}, 244 {0x1106, 0x3038, PCI_ANY_ID, 1, VIA_ID, 3, 245 mpc85xx_config_via_usb2, {0,0,0}}, 246 {0x1106, 0x3058, PCI_ANY_ID, 1, VIA_ID, 5, 247 mpc85xx_config_via_power, {0,0,0}}, 248 {0x1106, 0x3068, PCI_ANY_ID, 1, VIA_ID, 6, 249 mpc85xx_config_via_ac97, {0,0,0}}, 250 {}, 251 }; 252 253 static struct pci_controller pci1_hose = { 254 config_table: pci_mpc85xxcds_config_table}; 255 #endif /* CONFIG_PCI */ 256 257 #ifdef CONFIG_PCI2 258 static struct pci_controller pci2_hose; 259 #endif /* CONFIG_PCI2 */ 260 261 #ifdef CONFIG_PCIE1 262 static struct pci_controller pcie1_hose; 263 #endif /* CONFIG_PCIE1 */ 264 265 void pci_init_board(void) 266 { 267 volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 268 struct fsl_pci_info pci_info[4]; 269 u32 devdisr, pordevsr, io_sel; 270 u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel; 271 int first_free_busno = 0; 272 int num = 0; 273 274 int pcie_ep, pcie_configured; 275 276 devdisr = in_be32(&gur->devdisr); 277 pordevsr = in_be32(&gur->pordevsr); 278 porpllsr = in_be32(&gur->porpllsr); 279 io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; 280 281 debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel); 282 283 #ifdef CONFIG_PCI1 284 pci_speed = get_clock_freq (); /* PCI PSPEED in [4:5] */ 285 pci_32 = pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32; /* PORDEVSR[15] */ 286 pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; 287 pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; 288 289 if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { 290 SET_STD_PCI_INFO(pci_info[num], 1); 291 pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs); 292 printf ("\n PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n", 293 (pci_32) ? 32 : 64, 294 (pci_speed == 33333000) ? "33" : 295 (pci_speed == 66666000) ? "66" : "unknown", 296 pci_clk_sel ? "sync" : "async", 297 pci_agent ? "agent" : "host", 298 pci_arb ? "arbiter" : "external-arbiter", 299 pci_info[num].regs); 300 301 first_free_busno = fsl_pci_init_port(&pci_info[num++], 302 &pci1_hose, first_free_busno); 303 304 #ifdef CONFIG_PCIX_CHECK 305 if (!(pordevsr & MPC85xx_PORDEVSR_PCI1)) { 306 /* PCI-X init */ 307 if (CONFIG_SYS_CLK_FREQ < 66000000) 308 printf("PCI-X will only work at 66 MHz\n"); 309 310 reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ 311 | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E; 312 pci_hose_write_config_word(hose, bus, PCIX_COMMAND, reg16); 313 } 314 #endif 315 } else { 316 printf (" PCI: disabled\n"); 317 } 318 319 puts("\n"); 320 #else 321 setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */ 322 #endif 323 324 #ifdef CONFIG_PCI2 325 { 326 uint pci2_clk_sel = porpllsr & 0x4000; /* PORPLLSR[17] */ 327 uint pci_dual = get_pci_dual (); /* PCI DUAL in CM_PCI[3] */ 328 if (pci_dual) { 329 printf (" PCI2: 32 bit, 66 MHz, %s\n", 330 pci2_clk_sel ? "sync" : "async"); 331 } else { 332 printf (" PCI2: disabled\n"); 333 } 334 } 335 #else 336 setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI2); /* disable */ 337 #endif /* CONFIG_PCI2 */ 338 339 #ifdef CONFIG_PCIE1 340 pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel); 341 342 if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ 343 SET_STD_PCIE_INFO(pci_info[num], 1); 344 pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); 345 printf (" PCIE1 connected to Slot as %s (base addr %lx)\n", 346 pcie_ep ? "Endpoint" : "Root Complex", 347 pci_info[num].regs); 348 349 first_free_busno = fsl_pci_init_port(&pci_info[num++], 350 &pcie1_hose, first_free_busno); 351 } else { 352 printf (" PCIE1: disabled\n"); 353 } 354 355 puts("\n"); 356 #else 357 setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */ 358 #endif 359 } 360 361 int last_stage_init(void) 362 { 363 unsigned short temp; 364 365 /* Change the resistors for the PHY */ 366 /* This is needed to get the RGMII working for the 1.3+ 367 * CDS cards */ 368 if (get_board_version() == 0x13) { 369 miiphy_write(CONFIG_TSEC1_NAME, 370 TSEC1_PHY_ADDR, 29, 18); 371 372 miiphy_read(CONFIG_TSEC1_NAME, 373 TSEC1_PHY_ADDR, 30, &temp); 374 375 temp = (temp & 0xf03f); 376 temp |= 2 << 9; /* 36 ohm */ 377 temp |= 2 << 6; /* 39 ohm */ 378 379 miiphy_write(CONFIG_TSEC1_NAME, 380 TSEC1_PHY_ADDR, 30, temp); 381 382 miiphy_write(CONFIG_TSEC1_NAME, 383 TSEC1_PHY_ADDR, 29, 3); 384 385 miiphy_write(CONFIG_TSEC1_NAME, 386 TSEC1_PHY_ADDR, 30, 0x8000); 387 } 388 389 return 0; 390 } 391 392 393 #if defined(CONFIG_OF_BOARD_SETUP) 394 void ft_pci_setup(void *blob, bd_t *bd) 395 { 396 #ifdef CONFIG_PCI1 397 ft_fsl_pci_setup(blob, "pci0", &pci1_hose); 398 #endif 399 #ifdef CONFIG_PCIE1 400 ft_fsl_pci_setup(blob, "pci1", &pcie1_hose); 401 #endif 402 } 403 #endif 404