1 /* 2 * Copyright 2008-2012 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #include <common.h> 8 #include <command.h> 9 #include <pci.h> 10 #include <asm/processor.h> 11 #include <asm/mmu.h> 12 #include <asm/cache.h> 13 #include <asm/immap_85xx.h> 14 #include <asm/fsl_pci.h> 15 #include <fsl_ddr_sdram.h> 16 #include <asm/io.h> 17 #include <asm/fsl_serdes.h> 18 #include <spd.h> 19 #include <miiphy.h> 20 #include <libfdt.h> 21 #include <spd_sdram.h> 22 #include <fdt_support.h> 23 #include <fsl_mdio.h> 24 #include <tsec.h> 25 #include <netdev.h> 26 #include <sata.h> 27 28 #include "../common/sgmii_riser.h" 29 30 int board_early_init_f (void) 31 { 32 #ifdef CONFIG_MMC 33 volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 34 35 setbits_be32(&gur->pmuxcr, 36 (MPC85xx_PMUXCR_SDHC_CD | 37 MPC85xx_PMUXCR_SDHC_WP)); 38 39 /* The MPC8536DS board insert the SDHC_WP pin for erratum NMG_eSDHC118, 40 * however, this erratum only applies to MPC8536 Rev1.0. 41 * So set SDHC_WP to active-low when use MPC8536 Rev1.1 and greater.*/ 42 if ((((SVR_MAJ(get_svr()) & 0x7) == 0x1) && 43 (SVR_MIN(get_svr()) >= 0x1)) 44 || (SVR_MAJ(get_svr() & 0x7) > 0x1)) 45 setbits_be32(&gur->gencfgr, MPC85xx_GENCFGR_SDHC_WP_INV); 46 #endif 47 return 0; 48 } 49 50 int checkboard (void) 51 { 52 u8 vboot; 53 u8 *pixis_base = (u8 *)PIXIS_BASE; 54 55 printf("Board: MPC8536DS Sys ID: 0x%02x, " 56 "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", 57 in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER), 58 in_8(pixis_base + PIXIS_PVER)); 59 60 vboot = in_8(pixis_base + PIXIS_VBOOT); 61 switch ((vboot & PIXIS_VBOOT_LBMAP) >> 5) { 62 case PIXIS_VBOOT_LBMAP_NOR0: 63 puts ("vBank: 0\n"); 64 break; 65 case PIXIS_VBOOT_LBMAP_NOR1: 66 puts ("vBank: 1\n"); 67 break; 68 case PIXIS_VBOOT_LBMAP_NOR2: 69 puts ("vBank: 2\n"); 70 break; 71 case PIXIS_VBOOT_LBMAP_NOR3: 72 puts ("vBank: 3\n"); 73 break; 74 case PIXIS_VBOOT_LBMAP_PJET: 75 puts ("Promjet\n"); 76 break; 77 case PIXIS_VBOOT_LBMAP_NAND: 78 puts ("NAND\n"); 79 break; 80 } 81 82 return 0; 83 } 84 85 #if !defined(CONFIG_SPD_EEPROM) 86 /* 87 * Fixed sdram init -- doesn't use serial presence detect. 88 */ 89 90 phys_size_t fixed_sdram (void) 91 { 92 volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; 93 struct ccsr_ddr __iomem *ddr = &immap->im_ddr; 94 uint d_init; 95 96 ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; 97 ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; 98 99 ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; 100 ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; 101 ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; 102 ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; 103 ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1; 104 ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2; 105 ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL; 106 ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT; 107 ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL; 108 ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2; 109 110 #if defined (CONFIG_DDR_ECC) 111 ddr->err_int_en = CONFIG_SYS_DDR_ERR_INT_EN; 112 ddr->err_disable = CONFIG_SYS_DDR_ERR_DIS; 113 ddr->err_sbe = CONFIG_SYS_DDR_SBE; 114 #endif 115 asm("sync;isync"); 116 117 udelay(500); 118 119 ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL; 120 121 #if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) 122 d_init = 1; 123 debug("DDR - 1st controller: memory initializing\n"); 124 /* 125 * Poll until memory is initialized. 126 * 512 Meg at 400 might hit this 200 times or so. 127 */ 128 while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0) { 129 udelay(1000); 130 } 131 debug("DDR: memory initialized\n\n"); 132 asm("sync; isync"); 133 udelay(500); 134 #endif 135 136 return 512 * 1024 * 1024; 137 } 138 139 #endif 140 141 #ifdef CONFIG_PCI1 142 static struct pci_controller pci1_hose; 143 #endif 144 145 #ifdef CONFIG_PCI 146 void pci_init_board(void) 147 { 148 ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 149 struct fsl_pci_info pci_info; 150 u32 devdisr, pordevsr; 151 u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel; 152 int first_free_busno; 153 154 first_free_busno = fsl_pcie_init_board(0); 155 156 #ifdef CONFIG_PCI1 157 devdisr = in_be32(&gur->devdisr); 158 pordevsr = in_be32(&gur->pordevsr); 159 porpllsr = in_be32(&gur->porpllsr); 160 161 pci_speed = 66666000; 162 pci_32 = 1; 163 pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; 164 pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; 165 166 if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { 167 SET_STD_PCI_INFO(pci_info, 1); 168 set_next_law(pci_info.mem_phys, 169 law_size_bits(pci_info.mem_size), pci_info.law); 170 set_next_law(pci_info.io_phys, 171 law_size_bits(pci_info.io_size), pci_info.law); 172 173 pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs); 174 printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n", 175 (pci_32) ? 32 : 64, 176 (pci_speed == 33333000) ? "33" : 177 (pci_speed == 66666000) ? "66" : "unknown", 178 pci_clk_sel ? "sync" : "async", 179 pci_agent ? "agent" : "host", 180 pci_arb ? "arbiter" : "external-arbiter", 181 pci_info.regs); 182 183 first_free_busno = fsl_pci_init_port(&pci_info, 184 &pci1_hose, first_free_busno); 185 } else { 186 printf("PCI: disabled\n"); 187 } 188 189 puts("\n"); 190 #else 191 setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */ 192 #endif 193 } 194 #endif 195 196 int board_early_init_r(void) 197 { 198 const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; 199 int flash_esel = find_tlb_idx((void *)flashbase, 1); 200 201 /* 202 * Remap Boot flash + PROMJET region to caching-inhibited 203 * so that flash can be erased properly. 204 */ 205 206 /* Flush d-cache and invalidate i-cache of any FLASH data */ 207 flush_dcache(); 208 invalidate_icache(); 209 210 if (flash_esel == -1) { 211 /* very unlikely unless something is messed up */ 212 puts("Error: Could not find TLB for FLASH BASE\n"); 213 flash_esel = 1; /* give our best effort to continue */ 214 } else { 215 /* invalidate existing TLB entry for flash + promjet */ 216 disable_tlb(flash_esel); 217 } 218 219 set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */ 220 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */ 221 0, flash_esel, BOOKE_PAGESZ_256M, 1); /* ts, esel, tsize, iprot */ 222 223 return 0; 224 } 225 226 int board_eth_init(bd_t *bis) 227 { 228 #ifdef CONFIG_TSEC_ENET 229 struct fsl_pq_mdio_info mdio_info; 230 struct tsec_info_struct tsec_info[2]; 231 int num = 0; 232 233 #ifdef CONFIG_TSEC1 234 SET_STD_TSEC_INFO(tsec_info[num], 1); 235 if (is_serdes_configured(SGMII_TSEC1)) { 236 puts("eTSEC1 is in sgmii mode.\n"); 237 tsec_info[num].phyaddr = 0; 238 tsec_info[num].flags |= TSEC_SGMII; 239 } 240 num++; 241 #endif 242 #ifdef CONFIG_TSEC3 243 SET_STD_TSEC_INFO(tsec_info[num], 3); 244 if (is_serdes_configured(SGMII_TSEC3)) { 245 puts("eTSEC3 is in sgmii mode.\n"); 246 tsec_info[num].phyaddr = 1; 247 tsec_info[num].flags |= TSEC_SGMII; 248 } 249 num++; 250 #endif 251 252 if (!num) { 253 printf("No TSECs initialized\n"); 254 return 0; 255 } 256 257 #ifdef CONFIG_FSL_SGMII_RISER 258 if (is_serdes_configured(SGMII_TSEC1) || 259 is_serdes_configured(SGMII_TSEC3)) { 260 fsl_sgmii_riser_init(tsec_info, num); 261 } 262 #endif 263 264 mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; 265 mdio_info.name = DEFAULT_MII_NAME; 266 fsl_pq_mdio_init(bis, &mdio_info); 267 268 tsec_eth_init(bis, tsec_info, num); 269 #endif 270 return pci_eth_init(bis); 271 } 272 273 #if defined(CONFIG_OF_BOARD_SETUP) 274 int ft_board_setup(void *blob, bd_t *bd) 275 { 276 ft_cpu_setup(blob, bd); 277 278 FT_FSL_PCI_SETUP; 279 280 #ifdef CONFIG_FSL_SGMII_RISER 281 fsl_sgmii_riser_fdt_fixup(blob); 282 #endif 283 284 #ifdef CONFIG_HAS_FSL_MPH_USB 285 fdt_fixup_dr_usb(blob, bd); 286 #endif 287 288 return 0; 289 } 290 #endif 291