1 /* 2 * Copyright (C) 2007 Freescale Semiconductor, Inc. 3 * Kevin Lam <kevin.lam@freescale.com> 4 * Joe D'Abbraccio <joe.d'abbraccio@freescale.com> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #include <common.h> 10 #include <hwconfig.h> 11 #include <i2c.h> 12 #include <asm/io.h> 13 #include <asm/fsl_mpc83xx_serdes.h> 14 #include <fdt_support.h> 15 #include <spd_sdram.h> 16 #include <vsc7385.h> 17 #include <fsl_esdhc.h> 18 19 DECLARE_GLOBAL_DATA_PTR; 20 21 #if defined(CONFIG_SYS_DRAM_TEST) 22 int 23 testdram(void) 24 { 25 uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START; 26 uint *pend = (uint *) CONFIG_SYS_MEMTEST_END; 27 uint *p; 28 29 printf("Testing DRAM from 0x%08x to 0x%08x\n", 30 CONFIG_SYS_MEMTEST_START, 31 CONFIG_SYS_MEMTEST_END); 32 33 printf("DRAM test phase 1:\n"); 34 for (p = pstart; p < pend; p++) 35 *p = 0xaaaaaaaa; 36 37 for (p = pstart; p < pend; p++) { 38 if (*p != 0xaaaaaaaa) { 39 printf("DRAM test fails at: %08x\n", (uint) p); 40 return 1; 41 } 42 } 43 44 printf("DRAM test phase 2:\n"); 45 for (p = pstart; p < pend; p++) 46 *p = 0x55555555; 47 48 for (p = pstart; p < pend; p++) { 49 if (*p != 0x55555555) { 50 printf("DRAM test fails at: %08x\n", (uint) p); 51 return 1; 52 } 53 } 54 55 printf("DRAM test passed.\n"); 56 return 0; 57 } 58 #endif 59 60 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) 61 void ddr_enable_ecc(unsigned int dram_size); 62 #endif 63 int fixed_sdram(void); 64 65 int dram_init(void) 66 { 67 immap_t *im = (immap_t *) CONFIG_SYS_IMMR; 68 u32 msize = 0; 69 70 if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) 71 return -ENXIO; 72 73 #if defined(CONFIG_SPD_EEPROM) 74 msize = spd_sdram(); 75 #else 76 msize = fixed_sdram(); 77 #endif 78 79 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) 80 /* Initialize DDR ECC byte */ 81 ddr_enable_ecc(msize * 1024 * 1024); 82 #endif 83 /* return total bus DDR size(bytes) */ 84 gd->ram_size = msize * 1024 * 1024; 85 86 return 0; 87 } 88 89 #if !defined(CONFIG_SPD_EEPROM) 90 /************************************************************************* 91 * fixed sdram init -- doesn't use serial presence detect. 92 ************************************************************************/ 93 int fixed_sdram(void) 94 { 95 immap_t *im = (immap_t *) CONFIG_SYS_IMMR; 96 u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024; 97 u32 msize_log2 = __ilog2(msize); 98 99 im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000; 100 im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1); 101 102 im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE; 103 udelay(50000); 104 105 im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL; 106 udelay(1000); 107 108 im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS; 109 im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG; 110 udelay(1000); 111 112 im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; 113 im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; 114 im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; 115 im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; 116 im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG; 117 im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2; 118 im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE; 119 im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2; 120 im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL; 121 sync(); 122 udelay(1000); 123 124 im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; 125 udelay(2000); 126 return CONFIG_SYS_DDR_SIZE; 127 } 128 #endif /*!CONFIG_SYS_SPD_EEPROM */ 129 130 int checkboard(void) 131 { 132 puts("Board: Freescale MPC837xERDB\n"); 133 return 0; 134 } 135 136 int board_early_init_f(void) 137 { 138 #ifdef CONFIG_FSL_SERDES 139 immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; 140 u32 spridr = in_be32(&immr->sysconf.spridr); 141 142 /* we check only part num, and don't look for CPU revisions */ 143 switch (PARTID_NO_E(spridr)) { 144 case SPR_8377: 145 fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA, 146 FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); 147 fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX, 148 FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); 149 break; 150 case SPR_8378: 151 fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX, 152 FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); 153 break; 154 case SPR_8379: 155 fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA, 156 FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); 157 fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_SATA, 158 FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); 159 break; 160 default: 161 printf("serdes not configured: unknown CPU part number: " 162 "%04x\n", spridr >> 16); 163 break; 164 } 165 #endif /* CONFIG_FSL_SERDES */ 166 return 0; 167 } 168 169 #ifdef CONFIG_FSL_ESDHC 170 int board_mmc_init(bd_t *bd) 171 { 172 struct immap __iomem *im = (struct immap __iomem *)CONFIG_SYS_IMMR; 173 char buffer[HWCONFIG_BUFFER_SIZE] = {0}; 174 int esdhc_hwconfig_enabled = 0; 175 176 if (getenv_f("hwconfig", buffer, sizeof(buffer)) > 0) 177 esdhc_hwconfig_enabled = hwconfig_f("esdhc", buffer); 178 179 if (esdhc_hwconfig_enabled == 0) 180 return 0; 181 182 clrsetbits_be32(&im->sysconf.sicrl, SICRL_USB_B, SICRL_USB_B_SD); 183 clrsetbits_be32(&im->sysconf.sicrh, SICRH_SPI, SICRH_SPI_SD); 184 185 return fsl_esdhc_mmc_init(bd); 186 } 187 #endif 188 189 /* 190 * Miscellaneous late-boot configurations 191 * 192 * If a VSC7385 microcode image is present, then upload it. 193 */ 194 int misc_init_r(void) 195 { 196 int rc = 0; 197 198 #ifdef CONFIG_VSC7385_IMAGE 199 if (vsc7385_upload_firmware((void *) CONFIG_VSC7385_IMAGE, 200 CONFIG_VSC7385_IMAGE_SIZE)) { 201 puts("Failure uploading VSC7385 microcode.\n"); 202 rc = 1; 203 } 204 #endif 205 206 return rc; 207 } 208 209 #if defined(CONFIG_OF_BOARD_SETUP) 210 211 int ft_board_setup(void *blob, bd_t *bd) 212 { 213 #ifdef CONFIG_PCI 214 ft_pci_setup(blob, bd); 215 #endif 216 ft_cpu_setup(blob, bd); 217 fsl_fdt_fixup_dr_usb(blob, bd); 218 fdt_fixup_esdhc(blob, bd); 219 220 return 0; 221 } 222 #endif /* CONFIG_OF_BOARD_SETUP */ 223