1 /* 2 * Copyright (C) Freescale Semiconductor, Inc. 2006. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 #include <common.h> 24 #include <ioports.h> 25 #include <mpc83xx.h> 26 #include <i2c.h> 27 #include <miiphy.h> 28 #include <vsc7385.h> 29 #ifdef CONFIG_PCI 30 #include <asm/mpc8349_pci.h> 31 #include <pci.h> 32 #endif 33 #include <spd_sdram.h> 34 #include <asm/mmu.h> 35 #if defined(CONFIG_OF_LIBFDT) 36 #include <libfdt.h> 37 #endif 38 39 #ifndef CONFIG_SPD_EEPROM 40 /************************************************************************* 41 * fixed sdram init -- doesn't use serial presence detect. 42 ************************************************************************/ 43 int fixed_sdram(void) 44 { 45 volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; 46 u32 ddr_size; /* The size of RAM, in bytes */ 47 u32 ddr_size_log2 = 0; 48 49 for (ddr_size = CONFIG_SYS_DDR_SIZE * 0x100000; ddr_size > 1; ddr_size >>= 1) { 50 if (ddr_size & 1) { 51 return -1; 52 } 53 ddr_size_log2++; 54 } 55 56 im->sysconf.ddrlaw[0].ar = 57 LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); 58 im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000; 59 60 /* Only one CS0 for DDR */ 61 im->ddr.csbnds[0].csbnds = 0x0000000f; 62 im->ddr.cs_config[0] = CONFIG_SYS_DDR_CONFIG; 63 64 debug("cs0_bnds = 0x%08x\n", im->ddr.csbnds[0].csbnds); 65 debug("cs0_config = 0x%08x\n", im->ddr.cs_config[0]); 66 67 debug("DDR:bar=0x%08x\n", im->sysconf.ddrlaw[0].bar); 68 debug("DDR:ar=0x%08x\n", im->sysconf.ddrlaw[0].ar); 69 70 im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; 71 im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;/* Was "2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT" */ 72 im->ddr.sdram_cfg = SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR1; 73 im->ddr.sdram_mode = 74 (0x0000 << SDRAM_MODE_ESD_SHIFT) | (0x0032 << SDRAM_MODE_SD_SHIFT); 75 im->ddr.sdram_interval = 76 (0x0410 << SDRAM_INTERVAL_REFINT_SHIFT) | (0x0100 << 77 SDRAM_INTERVAL_BSTOPRE_SHIFT); 78 im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL; 79 80 udelay(200); 81 82 im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; 83 84 debug("DDR:timing_cfg_1=0x%08x\n", im->ddr.timing_cfg_1); 85 debug("DDR:timing_cfg_2=0x%08x\n", im->ddr.timing_cfg_2); 86 debug("DDR:sdram_mode=0x%08x\n", im->ddr.sdram_mode); 87 debug("DDR:sdram_interval=0x%08x\n", im->ddr.sdram_interval); 88 debug("DDR:sdram_cfg=0x%08x\n", im->ddr.sdram_cfg); 89 90 return CONFIG_SYS_DDR_SIZE; 91 } 92 #endif 93 94 #ifdef CONFIG_PCI 95 /* 96 * Initialize PCI Devices, report devices found 97 */ 98 #ifndef CONFIG_PCI_PNP 99 static struct pci_config_table pci_mpc83xxmitx_config_table[] = { 100 { 101 PCI_ANY_ID, 102 PCI_ANY_ID, 103 PCI_ANY_ID, 104 PCI_ANY_ID, 105 0x0f, 106 PCI_ANY_ID, 107 pci_cfgfunc_config_device, 108 { 109 PCI_ENET0_IOADDR, 110 PCI_ENET0_MEMADDR, 111 PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER} 112 }, 113 {} 114 } 115 #endif 116 117 volatile static struct pci_controller hose[] = { 118 { 119 #ifndef CONFIG_PCI_PNP 120 config_table:pci_mpc83xxmitx_config_table, 121 #endif 122 }, 123 { 124 #ifndef CONFIG_PCI_PNP 125 config_table:pci_mpc83xxmitx_config_table, 126 #endif 127 } 128 }; 129 #endif /* CONFIG_PCI */ 130 131 phys_size_t initdram(int board_type) 132 { 133 volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; 134 u32 msize = 0; 135 #ifdef CONFIG_DDR_ECC 136 volatile ddr83xx_t *ddr = &im->ddr; 137 #endif 138 139 if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) 140 return -1; 141 142 /* DDR SDRAM - Main SODIMM */ 143 im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR; 144 #ifdef CONFIG_SPD_EEPROM 145 msize = spd_sdram(); 146 #else 147 msize = fixed_sdram(); 148 #endif 149 150 #ifdef CONFIG_DDR_ECC 151 if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) 152 /* Unlike every other board, on the 83xx spd_sdram() returns 153 megabytes instead of just bytes. That's why we need to 154 multiple by 1MB when calling ddr_enable_ecc(). */ 155 ddr_enable_ecc(msize * 1048576); 156 #endif 157 158 /* return total bus RAM size(bytes) */ 159 return msize * 1024 * 1024; 160 } 161 162 int checkboard(void) 163 { 164 #ifdef CONFIG_MPC8349ITX 165 puts("Board: Freescale MPC8349E-mITX\n"); 166 #else 167 puts("Board: Freescale MPC8349E-mITX-GP\n"); 168 #endif 169 170 return 0; 171 } 172 173 /* 174 * Implement a work-around for a hardware problem with compact 175 * flash. 176 * 177 * Program the UPM if compact flash is enabled. 178 */ 179 int misc_init_f(void) 180 { 181 #ifdef CONFIG_VSC7385_ENET 182 volatile u32 *vsc7385_cpuctrl; 183 184 /* 0x1c0c0 is the VSC7385 CPU Control (CPUCTRL) Register. The power up 185 default of VSC7385 L1_IRQ and L2_IRQ requests are active high. That 186 means it is 0 when the IRQ is not active. This makes the wire-AND 187 logic always assert IRQ7 to CPU even if there is no request from the 188 switch. Since the compact flash and the switch share the same IRQ, 189 the Linux kernel will think that the compact flash is requesting irq 190 and get stuck when it tries to clear the IRQ. Thus we need to set 191 the L2_IRQ0 and L2_IRQ1 to active low. 192 193 The following code sets the L1_IRQ and L2_IRQ polarity to active low. 194 Without this code, compact flash will not work in Linux because 195 unlike U-Boot, Linux uses the IRQ, so this code is necessary if we 196 don't enable compact flash for U-Boot. 197 */ 198 199 vsc7385_cpuctrl = (volatile u32 *)(CONFIG_SYS_VSC7385_BASE + 0x1c0c0); 200 *vsc7385_cpuctrl |= 0x0c; 201 #endif 202 203 #ifdef CONFIG_COMPACT_FLASH 204 /* UPM Table Configuration Code */ 205 static uint UPMATable[] = { 206 0xcffffc00, 0x0fffff00, 0x0fafff00, 0x0fafff00, 207 0x0faffd00, 0x0faffc04, 0x0ffffc00, 0x3ffffc01, 208 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, 209 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, 210 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfff7fc00, 211 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, 212 0xcffffc00, 0x0fffff00, 0x0ff3ff00, 0x0ff3ff00, 213 0x0ff3fe00, 0x0ffffc00, 0x3ffffc05, 0xfffffc00, 214 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, 215 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, 216 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, 217 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, 218 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, 219 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, 220 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, 221 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01 222 }; 223 volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; 224 volatile fsl_lbus_t *lbus = &immap->lbus; 225 226 lbus->bank[3].br = CONFIG_SYS_BR3_PRELIM; 227 lbus->bank[3].or = CONFIG_SYS_OR3_PRELIM; 228 229 /* Program the MAMR. RFEN=0, OP=00, UWPL=1, AM=000, DS=01, G0CL=000, 230 GPL4=0, RLF=0001, WLF=0001, TLF=0001, MAD=000000 231 */ 232 lbus->mamr = 0x08404440; 233 234 upmconfig(0, UPMATable, sizeof(UPMATable) / sizeof(UPMATable[0])); 235 236 puts("UPMA: Configured for compact flash\n"); 237 #endif 238 239 return 0; 240 } 241 242 /* 243 * Miscellaneous late-boot configurations 244 * 245 * Make sure the EEPROM has the HRCW correctly programmed. 246 * Make sure the RTC is correctly programmed. 247 * 248 * The MPC8349E-mITX can be configured to load the HRCW from 249 * EEPROM instead of flash. This is controlled via jumpers 250 * LGPL0, 1, and 3. Normally, these jumpers are set to 000 (all 251 * jumpered), but if they're set to 001 or 010, then the HRCW is 252 * read from the "I2C EEPROM". 253 * 254 * This function makes sure that the I2C EEPROM is programmed 255 * correctly. 256 * 257 * If a VSC7385 microcode image is present, then upload it. 258 */ 259 int misc_init_r(void) 260 { 261 int rc = 0; 262 263 #ifdef CONFIG_HARD_I2C 264 265 unsigned int orig_bus = i2c_get_bus_num(); 266 u8 i2c_data; 267 268 #ifdef CONFIG_SYS_I2C_RTC_ADDR 269 u8 ds1339_data[17]; 270 #endif 271 272 #ifdef CONFIG_SYS_I2C_EEPROM_ADDR 273 static u8 eeprom_data[] = /* HRCW data */ 274 { 275 0xAA, 0x55, 0xAA, /* Preamble */ 276 0x7C, /* ACS=0, BYTE_EN=1111, CONT=1 */ 277 0x02, 0x40, /* RCWL ADDR=0x0_0900 */ 278 (CONFIG_SYS_HRCW_LOW >> 24) & 0xFF, 279 (CONFIG_SYS_HRCW_LOW >> 16) & 0xFF, 280 (CONFIG_SYS_HRCW_LOW >> 8) & 0xFF, 281 CONFIG_SYS_HRCW_LOW & 0xFF, 282 0x7C, /* ACS=0, BYTE_EN=1111, CONT=1 */ 283 0x02, 0x41, /* RCWH ADDR=0x0_0904 */ 284 (CONFIG_SYS_HRCW_HIGH >> 24) & 0xFF, 285 (CONFIG_SYS_HRCW_HIGH >> 16) & 0xFF, 286 (CONFIG_SYS_HRCW_HIGH >> 8) & 0xFF, 287 CONFIG_SYS_HRCW_HIGH & 0xFF 288 }; 289 290 u8 data[sizeof(eeprom_data)]; 291 #endif 292 293 printf("Board revision: "); 294 i2c_set_bus_num(1); 295 if (i2c_read(CONFIG_SYS_I2C_8574A_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0) 296 printf("%u.%u (PCF8475A)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01); 297 else if (i2c_read(CONFIG_SYS_I2C_8574_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0) 298 printf("%u.%u (PCF8475)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01); 299 else { 300 printf("Unknown\n"); 301 rc = 1; 302 } 303 304 #ifdef CONFIG_SYS_I2C_EEPROM_ADDR 305 i2c_set_bus_num(0); 306 307 if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, data, sizeof(data)) == 0) { 308 if (memcmp(data, eeprom_data, sizeof(data)) != 0) { 309 if (i2c_write 310 (CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, eeprom_data, 311 sizeof(eeprom_data)) != 0) { 312 puts("Failure writing the HRCW to EEPROM via I2C.\n"); 313 rc = 1; 314 } 315 } 316 } else { 317 puts("Failure reading the HRCW from EEPROM via I2C.\n"); 318 rc = 1; 319 } 320 #endif 321 322 #ifdef CONFIG_SYS_I2C_RTC_ADDR 323 i2c_set_bus_num(1); 324 325 if (i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, ds1339_data, sizeof(ds1339_data)) 326 == 0) { 327 328 /* Work-around for MPC8349E-mITX bug #13601. 329 If the RTC does not contain valid register values, the DS1339 330 Linux driver will not work. 331 */ 332 333 /* Make sure status register bits 6-2 are zero */ 334 ds1339_data[0x0f] &= ~0x7c; 335 336 /* Check for a valid day register value */ 337 ds1339_data[0x03] &= ~0xf8; 338 if (ds1339_data[0x03] == 0) { 339 ds1339_data[0x03] = 1; 340 } 341 342 /* Check for a valid date register value */ 343 ds1339_data[0x04] &= ~0xc0; 344 if ((ds1339_data[0x04] == 0) || 345 ((ds1339_data[0x04] & 0x0f) > 9) || 346 (ds1339_data[0x04] >= 0x32)) { 347 ds1339_data[0x04] = 1; 348 } 349 350 /* Check for a valid month register value */ 351 ds1339_data[0x05] &= ~0x60; 352 353 if ((ds1339_data[0x05] == 0) || 354 ((ds1339_data[0x05] & 0x0f) > 9) || 355 ((ds1339_data[0x05] >= 0x13) 356 && (ds1339_data[0x05] <= 0x19))) { 357 ds1339_data[0x05] = 1; 358 } 359 360 /* Enable Oscillator and rate select */ 361 ds1339_data[0x0e] = 0x1c; 362 363 /* Work-around for MPC8349E-mITX bug #13330. 364 Ensure that the RTC control register contains the value 0x1c. 365 This affects SATA performance. 366 */ 367 368 if (i2c_write 369 (CONFIG_SYS_I2C_RTC_ADDR, 0, 1, ds1339_data, 370 sizeof(ds1339_data))) { 371 puts("Failure writing to the RTC via I2C.\n"); 372 rc = 1; 373 } 374 } else { 375 puts("Failure reading from the RTC via I2C.\n"); 376 rc = 1; 377 } 378 #endif 379 380 i2c_set_bus_num(orig_bus); 381 #endif 382 383 #ifdef CONFIG_VSC7385_IMAGE 384 if (vsc7385_upload_firmware((void *) CONFIG_VSC7385_IMAGE, 385 CONFIG_VSC7385_IMAGE_SIZE)) { 386 puts("Failure uploading VSC7385 microcode.\n"); 387 rc = 1; 388 } 389 #endif 390 391 return rc; 392 } 393 394 #if defined(CONFIG_OF_BOARD_SETUP) 395 void ft_board_setup(void *blob, bd_t *bd) 396 { 397 ft_cpu_setup(blob, bd); 398 #ifdef CONFIG_PCI 399 ft_pci_setup(blob, bd); 400 #endif 401 } 402 #endif 403