1 /* 2 * (C) Copyright 2006 3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #include <common.h> 9 #include <ioports.h> 10 #include <mpc83xx.h> 11 #include <asm/mpc8349_pci.h> 12 #include <i2c.h> 13 #include <spi.h> 14 #include <miiphy.h> 15 #ifdef CONFIG_SYS_FSL_DDR2 16 #include <fsl_ddr_sdram.h> 17 #else 18 #include <spd_sdram.h> 19 #endif 20 21 #if defined(CONFIG_OF_LIBFDT) 22 #include <libfdt.h> 23 #endif 24 25 int fixed_sdram(void); 26 void sdram_init(void); 27 28 #if defined(CONFIG_DDR_ECC) && defined(CONFIG_MPC83xx) 29 void ddr_enable_ecc(unsigned int dram_size); 30 #endif 31 32 int board_early_init_f (void) 33 { 34 volatile u8* bcsr = (volatile u8*)CONFIG_SYS_BCSR; 35 36 /* Enable flash write */ 37 bcsr[1] &= ~0x01; 38 39 #ifdef CONFIG_SYS_USE_MPC834XSYS_USB_PHY 40 /* Use USB PHY on SYS board */ 41 bcsr[5] |= 0x02; 42 #endif 43 44 return 0; 45 } 46 47 #define ns2clk(ns) (ns / (1000000000 / CONFIG_8349_CLKIN) + 1) 48 49 phys_size_t initdram (int board_type) 50 { 51 volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; 52 phys_size_t msize = 0; 53 54 if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) 55 return -1; 56 57 /* DDR SDRAM - Main SODIMM */ 58 im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR; 59 #if defined(CONFIG_SPD_EEPROM) 60 #ifndef CONFIG_SYS_FSL_DDR2 61 msize = spd_sdram() * 1024 * 1024; 62 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) 63 ddr_enable_ecc(msize); 64 #endif 65 #else 66 msize = fsl_ddr_sdram(); 67 #endif 68 #else 69 msize = fixed_sdram() * 1024 * 1024; 70 #endif 71 /* 72 * Initialize SDRAM if it is on local bus. 73 */ 74 sdram_init(); 75 76 /* return total bus SDRAM size(bytes) -- DDR */ 77 return msize; 78 } 79 80 #if !defined(CONFIG_SPD_EEPROM) 81 /************************************************************************* 82 * fixed sdram init -- doesn't use serial presence detect. 83 ************************************************************************/ 84 int fixed_sdram(void) 85 { 86 volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; 87 u32 msize = CONFIG_SYS_DDR_SIZE; 88 u32 ddr_size = msize << 20; /* DDR size in bytes */ 89 u32 ddr_size_log2 = __ilog2(ddr_size); 90 91 im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000; 92 im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); 93 94 #if (CONFIG_SYS_DDR_SIZE != 256) 95 #warning Currenly any ddr size other than 256 is not supported 96 #endif 97 #ifdef CONFIG_DDR_II 98 im->ddr.csbnds[2].csbnds = CONFIG_SYS_DDR_CS2_BNDS; 99 im->ddr.cs_config[2] = CONFIG_SYS_DDR_CS2_CONFIG; 100 im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; 101 im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; 102 im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; 103 im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; 104 im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG; 105 im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2; 106 im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE; 107 im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2; 108 im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL; 109 im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL; 110 #else 111 112 #if ((CONFIG_SYS_DDR_SDRAM_BASE & 0x00FFFFFF) != 0) 113 #warning Chip select bounds is only configurable in 16MB increments 114 #endif 115 im->ddr.csbnds[2].csbnds = 116 ((CONFIG_SYS_DDR_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) | 117 (((CONFIG_SYS_DDR_SDRAM_BASE + ddr_size - 1) >> 118 CSBNDS_EA_SHIFT) & CSBNDS_EA); 119 im->ddr.cs_config[2] = CONFIG_SYS_DDR_CS2_CONFIG; 120 121 /* currently we use only one CS, so disable the other banks */ 122 im->ddr.cs_config[0] = 0; 123 im->ddr.cs_config[1] = 0; 124 im->ddr.cs_config[3] = 0; 125 126 im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; 127 im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; 128 129 im->ddr.sdram_cfg = 130 SDRAM_CFG_SREN 131 #if defined(CONFIG_DDR_2T_TIMING) 132 | SDRAM_CFG_2T_EN 133 #endif 134 | 2 << SDRAM_CFG_SDRAM_TYPE_SHIFT; 135 #if defined (CONFIG_DDR_32BIT) 136 /* for 32-bit mode burst length is 8 */ 137 im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE); 138 #endif 139 im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE; 140 141 im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL; 142 #endif 143 udelay(200); 144 145 /* enable DDR controller */ 146 im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; 147 return msize; 148 } 149 #endif/*!CONFIG_SYS_SPD_EEPROM*/ 150 151 152 int checkboard (void) 153 { 154 /* 155 * Warning: do not read the BCSR registers here 156 * 157 * There is a timing bug in the 8349E and 8349EA BCSR code 158 * version 1.2 (read from BCSR 11) that will cause the CFI 159 * flash initialization code to overwrite BCSR 0, disabling 160 * the serial ports and gigabit ethernet 161 */ 162 163 puts("Board: Freescale MPC8349EMDS\n"); 164 return 0; 165 } 166 167 /* 168 * if MPC8349EMDS is soldered with SDRAM 169 */ 170 #if defined(CONFIG_SYS_BR2_PRELIM) \ 171 && defined(CONFIG_SYS_OR2_PRELIM) \ 172 && defined(CONFIG_SYS_LBLAWBAR2_PRELIM) \ 173 && defined(CONFIG_SYS_LBLAWAR2_PRELIM) 174 /* 175 * Initialize SDRAM memory on the Local Bus. 176 */ 177 178 void sdram_init(void) 179 { 180 volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; 181 volatile fsl_lbc_t *lbc = &immap->im_lbc; 182 uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; 183 184 /* 185 * Setup SDRAM Base and Option Registers, already done in cpu_init.c 186 */ 187 188 /* setup mtrpt, lsrt and lbcr for LB bus */ 189 lbc->lbcr = CONFIG_SYS_LBC_LBCR; 190 lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; 191 lbc->lsrt = CONFIG_SYS_LBC_LSRT; 192 asm("sync"); 193 194 /* 195 * Configure the SDRAM controller Machine Mode Register. 196 */ 197 lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */ 198 199 lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */ 200 asm("sync"); 201 *sdram_addr = 0xff; 202 udelay(100); 203 204 lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2; /* 0x48636733; auto refresh */ 205 asm("sync"); 206 /*1 times*/ 207 *sdram_addr = 0xff; 208 udelay(100); 209 /*2 times*/ 210 *sdram_addr = 0xff; 211 udelay(100); 212 /*3 times*/ 213 *sdram_addr = 0xff; 214 udelay(100); 215 /*4 times*/ 216 *sdram_addr = 0xff; 217 udelay(100); 218 /*5 times*/ 219 *sdram_addr = 0xff; 220 udelay(100); 221 /*6 times*/ 222 *sdram_addr = 0xff; 223 udelay(100); 224 /*7 times*/ 225 *sdram_addr = 0xff; 226 udelay(100); 227 /*8 times*/ 228 *sdram_addr = 0xff; 229 udelay(100); 230 231 /* 0x58636733; mode register write operation */ 232 lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4; 233 asm("sync"); 234 *sdram_addr = 0xff; 235 udelay(100); 236 237 lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */ 238 asm("sync"); 239 *sdram_addr = 0xff; 240 udelay(100); 241 } 242 #else 243 void sdram_init(void) 244 { 245 } 246 #endif 247 248 /* 249 * The following are used to control the SPI chip selects for the SPI command. 250 */ 251 #ifdef CONFIG_MPC8XXX_SPI 252 253 #define SPI_CS_MASK 0x80000000 254 255 int spi_cs_is_valid(unsigned int bus, unsigned int cs) 256 { 257 return bus == 0 && cs == 0; 258 } 259 260 void spi_cs_activate(struct spi_slave *slave) 261 { 262 volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0]; 263 264 iopd->dat &= ~SPI_CS_MASK; 265 } 266 267 void spi_cs_deactivate(struct spi_slave *slave) 268 { 269 volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0]; 270 271 iopd->dat |= SPI_CS_MASK; 272 } 273 #endif /* CONFIG_HARD_SPI */ 274 275 #if defined(CONFIG_OF_BOARD_SETUP) 276 void ft_board_setup(void *blob, bd_t *bd) 277 { 278 ft_cpu_setup(blob, bd); 279 #ifdef CONFIG_PCI 280 ft_pci_setup(blob, bd); 281 #endif 282 } 283 #endif 284