1 /* 2 * (C) Copyright 2006 3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4 * 5 * See file CREDITS for list of people who contributed to this 6 * project. 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of 11 * the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21 * MA 02111-1307 USA 22 * 23 */ 24 25 #include <common.h> 26 #include <ioports.h> 27 #include <mpc83xx.h> 28 #include <asm/mpc8349_pci.h> 29 #include <i2c.h> 30 #include <spi.h> 31 #include <miiphy.h> 32 #include <spd_sdram.h> 33 34 #if defined(CONFIG_OF_LIBFDT) 35 #include <libfdt.h> 36 #endif 37 38 int fixed_sdram(void); 39 void sdram_init(void); 40 41 #if defined(CONFIG_DDR_ECC) && defined(CONFIG_MPC83XX) 42 void ddr_enable_ecc(unsigned int dram_size); 43 #endif 44 45 int board_early_init_f (void) 46 { 47 volatile u8* bcsr = (volatile u8*)CFG_BCSR; 48 49 /* Enable flash write */ 50 bcsr[1] &= ~0x01; 51 52 #ifdef CFG_USE_MPC834XSYS_USB_PHY 53 /* Use USB PHY on SYS board */ 54 bcsr[5] |= 0x02; 55 #endif 56 57 return 0; 58 } 59 60 #define ns2clk(ns) (ns / (1000000000 / CONFIG_8349_CLKIN) + 1) 61 62 long int initdram (int board_type) 63 { 64 volatile immap_t *im = (immap_t *)CFG_IMMR; 65 u32 msize = 0; 66 67 if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) 68 return -1; 69 70 /* DDR SDRAM - Main SODIMM */ 71 im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; 72 #if defined(CONFIG_SPD_EEPROM) 73 msize = spd_sdram(); 74 #else 75 msize = fixed_sdram(); 76 #endif 77 /* 78 * Initialize SDRAM if it is on local bus. 79 */ 80 sdram_init(); 81 82 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) 83 /* 84 * Initialize and enable DDR ECC. 85 */ 86 ddr_enable_ecc(msize * 1024 * 1024); 87 #endif 88 89 /* return total bus SDRAM size(bytes) -- DDR */ 90 return (msize * 1024 * 1024); 91 } 92 93 #if !defined(CONFIG_SPD_EEPROM) 94 /************************************************************************* 95 * fixed sdram init -- doesn't use serial presence detect. 96 ************************************************************************/ 97 int fixed_sdram(void) 98 { 99 volatile immap_t *im = (immap_t *)CFG_IMMR; 100 u32 msize = 0; 101 u32 ddr_size; 102 u32 ddr_size_log2; 103 104 msize = CFG_DDR_SIZE; 105 for (ddr_size = msize << 20, ddr_size_log2 = 0; 106 (ddr_size > 1); 107 ddr_size = ddr_size>>1, ddr_size_log2++) { 108 if (ddr_size & 1) { 109 return -1; 110 } 111 } 112 im->sysconf.ddrlaw[0].bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff); 113 im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); 114 115 #if (CFG_DDR_SIZE != 256) 116 #warning Currenly any ddr size other than 256 is not supported 117 #endif 118 #ifdef CONFIG_DDR_II 119 im->ddr.csbnds[2].csbnds = CFG_DDR_CS2_BNDS; 120 im->ddr.cs_config[2] = CFG_DDR_CS2_CONFIG; 121 im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; 122 im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; 123 im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; 124 im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; 125 im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; 126 im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; 127 im->ddr.sdram_mode = CFG_DDR_MODE; 128 im->ddr.sdram_mode2 = CFG_DDR_MODE2; 129 im->ddr.sdram_interval = CFG_DDR_INTERVAL; 130 im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; 131 #else 132 im->ddr.csbnds[2].csbnds = 0x0000000f; 133 im->ddr.cs_config[2] = CFG_DDR_CONFIG; 134 135 /* currently we use only one CS, so disable the other banks */ 136 im->ddr.cs_config[0] = 0; 137 im->ddr.cs_config[1] = 0; 138 im->ddr.cs_config[3] = 0; 139 140 im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; 141 im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; 142 143 im->ddr.sdram_cfg = 144 SDRAM_CFG_SREN 145 #if defined(CONFIG_DDR_2T_TIMING) 146 | SDRAM_CFG_2T_EN 147 #endif 148 | 2 << SDRAM_CFG_SDRAM_TYPE_SHIFT; 149 #if defined (CONFIG_DDR_32BIT) 150 /* for 32-bit mode burst length is 8 */ 151 im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE); 152 #endif 153 im->ddr.sdram_mode = CFG_DDR_MODE; 154 155 im->ddr.sdram_interval = CFG_DDR_INTERVAL; 156 #endif 157 udelay(200); 158 159 /* enable DDR controller */ 160 im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; 161 return msize; 162 } 163 #endif/*!CFG_SPD_EEPROM*/ 164 165 166 int checkboard (void) 167 { 168 puts("Board: Freescale MPC8349EMDS\n"); 169 return 0; 170 } 171 172 /* 173 * if MPC8349EMDS is soldered with SDRAM 174 */ 175 #if defined(CFG_BR2_PRELIM) \ 176 && defined(CFG_OR2_PRELIM) \ 177 && defined(CFG_LBLAWBAR2_PRELIM) \ 178 && defined(CFG_LBLAWAR2_PRELIM) 179 /* 180 * Initialize SDRAM memory on the Local Bus. 181 */ 182 183 void sdram_init(void) 184 { 185 volatile immap_t *immap = (immap_t *)CFG_IMMR; 186 volatile lbus83xx_t *lbc= &immap->lbus; 187 uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE; 188 189 /* 190 * Setup SDRAM Base and Option Registers, already done in cpu_init.c 191 */ 192 193 /* setup mtrpt, lsrt and lbcr for LB bus */ 194 lbc->lbcr = CFG_LBC_LBCR; 195 lbc->mrtpr = CFG_LBC_MRTPR; 196 lbc->lsrt = CFG_LBC_LSRT; 197 asm("sync"); 198 199 /* 200 * Configure the SDRAM controller Machine Mode Register. 201 */ 202 lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */ 203 204 lbc->lsdmr = CFG_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */ 205 asm("sync"); 206 *sdram_addr = 0xff; 207 udelay(100); 208 209 lbc->lsdmr = CFG_LBC_LSDMR_2; /* 0x48636733; auto refresh */ 210 asm("sync"); 211 /*1 times*/ 212 *sdram_addr = 0xff; 213 udelay(100); 214 /*2 times*/ 215 *sdram_addr = 0xff; 216 udelay(100); 217 /*3 times*/ 218 *sdram_addr = 0xff; 219 udelay(100); 220 /*4 times*/ 221 *sdram_addr = 0xff; 222 udelay(100); 223 /*5 times*/ 224 *sdram_addr = 0xff; 225 udelay(100); 226 /*6 times*/ 227 *sdram_addr = 0xff; 228 udelay(100); 229 /*7 times*/ 230 *sdram_addr = 0xff; 231 udelay(100); 232 /*8 times*/ 233 *sdram_addr = 0xff; 234 udelay(100); 235 236 /* 0x58636733; mode register write operation */ 237 lbc->lsdmr = CFG_LBC_LSDMR_4; 238 asm("sync"); 239 *sdram_addr = 0xff; 240 udelay(100); 241 242 lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */ 243 asm("sync"); 244 *sdram_addr = 0xff; 245 udelay(100); 246 } 247 #else 248 void sdram_init(void) 249 { 250 } 251 #endif 252 253 /* 254 * The following are used to control the SPI chip selects for the SPI command. 255 */ 256 #ifdef CONFIG_HARD_SPI 257 258 #define SPI_CS_MASK 0x80000000 259 260 int spi_cs_is_valid(unsigned int bus, unsigned int cs) 261 { 262 return bus == 0 && cs == 0; 263 } 264 265 void spi_cs_activate(struct spi_slave *slave) 266 { 267 volatile gpio83xx_t *iopd = &((immap_t *)CFG_IMMR)->gpio[0]; 268 269 iopd->dat &= ~SPI_CS_MASK; 270 } 271 272 void spi_cs_deactivate(struct spi_slave *slave) 273 { 274 volatile gpio83xx_t *iopd = &((immap_t *)CFG_IMMR)->gpio[0]; 275 276 iopd->dat |= SPI_CS_MASK; 277 } 278 #endif /* CONFIG_HARD_SPI */ 279 280 #if defined(CONFIG_OF_BOARD_SETUP) 281 void ft_board_setup(void *blob, bd_t *bd) 282 { 283 ft_cpu_setup(blob, bd); 284 #ifdef CONFIG_PCI 285 ft_pci_setup(blob, bd); 286 #endif 287 } 288 #endif 289