1 /*
2  * (C) Copyright 2006
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  *
5  * See file CREDITS for list of people who contributed to this
6  * project.
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License as
10  * published by the Free Software Foundation; either version 2 of
11  * the License, or (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21  * MA 02111-1307 USA
22  *
23  */
24 
25 #include <common.h>
26 #include <ioports.h>
27 #include <mpc83xx.h>
28 #include <asm/mpc8349_pci.h>
29 #include <i2c.h>
30 #include <spi.h>
31 #include <miiphy.h>
32 #include <spd_sdram.h>
33 
34 #if defined(CONFIG_OF_LIBFDT)
35 #include <libfdt.h>
36 #endif
37 
38 int fixed_sdram(void);
39 void sdram_init(void);
40 
41 #if defined(CONFIG_DDR_ECC) && defined(CONFIG_MPC83xx)
42 void ddr_enable_ecc(unsigned int dram_size);
43 #endif
44 
45 int board_early_init_f (void)
46 {
47 	volatile u8* bcsr = (volatile u8*)CONFIG_SYS_BCSR;
48 
49 	/* Enable flash write */
50 	bcsr[1] &= ~0x01;
51 
52 #ifdef CONFIG_SYS_USE_MPC834XSYS_USB_PHY
53 	/* Use USB PHY on SYS board */
54 	bcsr[5] |= 0x02;
55 #endif
56 
57 	return 0;
58 }
59 
60 #define ns2clk(ns) (ns / (1000000000 / CONFIG_8349_CLKIN) + 1)
61 
62 phys_size_t initdram (int board_type)
63 {
64 	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
65 	u32 msize = 0;
66 
67 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
68 		return -1;
69 
70 	/* DDR SDRAM - Main SODIMM */
71 	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
72 #if defined(CONFIG_SPD_EEPROM)
73 	msize = spd_sdram();
74 #else
75 	msize = fixed_sdram();
76 #endif
77 	/*
78 	 * Initialize SDRAM if it is on local bus.
79 	 */
80 	sdram_init();
81 
82 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
83 	/*
84 	 * Initialize and enable DDR ECC.
85 	 */
86 	ddr_enable_ecc(msize * 1024 * 1024);
87 #endif
88 
89 	/* return total bus SDRAM size(bytes)  -- DDR */
90 	return (msize * 1024 * 1024);
91 }
92 
93 #if !defined(CONFIG_SPD_EEPROM)
94 /*************************************************************************
95  *  fixed sdram init -- doesn't use serial presence detect.
96  ************************************************************************/
97 int fixed_sdram(void)
98 {
99 	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
100 	u32 msize = 0;
101 	u32 ddr_size;
102 	u32 ddr_size_log2;
103 
104 	msize = CONFIG_SYS_DDR_SIZE;
105 	for (ddr_size = msize << 20, ddr_size_log2 = 0;
106 	     (ddr_size > 1);
107 	     ddr_size = ddr_size>>1, ddr_size_log2++) {
108 		if (ddr_size & 1) {
109 			return -1;
110 		}
111 	}
112 	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
113 	im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
114 
115 #if (CONFIG_SYS_DDR_SIZE != 256)
116 #warning Currenly any ddr size other than 256 is not supported
117 #endif
118 #ifdef CONFIG_DDR_II
119 	im->ddr.csbnds[2].csbnds = CONFIG_SYS_DDR_CS2_BNDS;
120 	im->ddr.cs_config[2] = CONFIG_SYS_DDR_CS2_CONFIG;
121 	im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
122 	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
123 	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
124 	im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
125 	im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
126 	im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
127 	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
128 	im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
129 	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
130 	im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
131 #else
132 	im->ddr.csbnds[2].csbnds = 0x0000000f;
133 	im->ddr.cs_config[2] = CONFIG_SYS_DDR_CONFIG;
134 
135 	/* currently we use only one CS, so disable the other banks */
136 	im->ddr.cs_config[0] = 0;
137 	im->ddr.cs_config[1] = 0;
138 	im->ddr.cs_config[3] = 0;
139 
140 	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
141 	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
142 
143 	im->ddr.sdram_cfg =
144 		SDRAM_CFG_SREN
145 #if defined(CONFIG_DDR_2T_TIMING)
146 		| SDRAM_CFG_2T_EN
147 #endif
148 		| 2 << SDRAM_CFG_SDRAM_TYPE_SHIFT;
149 #if defined (CONFIG_DDR_32BIT)
150 	/* for 32-bit mode burst length is 8 */
151 	im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE);
152 #endif
153 	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
154 
155 	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
156 #endif
157 	udelay(200);
158 
159 	/* enable DDR controller */
160 	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
161 	return msize;
162 }
163 #endif/*!CONFIG_SYS_SPD_EEPROM*/
164 
165 
166 int checkboard (void)
167 {
168 	/*
169 	 * Warning: do not read the BCSR registers here
170 	 *
171 	 * There is a timing bug in the 8349E and 8349EA BCSR code
172 	 * version 1.2 (read from BCSR 11) that will cause the CFI
173 	 * flash initialization code to overwrite BCSR 0, disabling
174 	 * the serial ports and gigabit ethernet
175 	 */
176 
177 	puts("Board: Freescale MPC8349EMDS\n");
178 	return 0;
179 }
180 
181 /*
182  * if MPC8349EMDS is soldered with SDRAM
183  */
184 #if defined(CONFIG_SYS_BR2_PRELIM)  \
185 	&& defined(CONFIG_SYS_OR2_PRELIM) \
186 	&& defined(CONFIG_SYS_LBLAWBAR2_PRELIM) \
187 	&& defined(CONFIG_SYS_LBLAWAR2_PRELIM)
188 /*
189  * Initialize SDRAM memory on the Local Bus.
190  */
191 
192 void sdram_init(void)
193 {
194 	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
195 	volatile fsl_lbus_t *lbc = &immap->lbus;
196 	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
197 
198 	/*
199 	 * Setup SDRAM Base and Option Registers, already done in cpu_init.c
200 	 */
201 
202 	/* setup mtrpt, lsrt and lbcr for LB bus */
203 	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
204 	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
205 	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
206 	asm("sync");
207 
208 	/*
209 	 * Configure the SDRAM controller Machine Mode Register.
210 	 */
211 	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */
212 
213 	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */
214 	asm("sync");
215 	*sdram_addr = 0xff;
216 	udelay(100);
217 
218 	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2; /* 0x48636733; auto refresh */
219 	asm("sync");
220 	/*1 times*/
221 	*sdram_addr = 0xff;
222 	udelay(100);
223 	/*2 times*/
224 	*sdram_addr = 0xff;
225 	udelay(100);
226 	/*3 times*/
227 	*sdram_addr = 0xff;
228 	udelay(100);
229 	/*4 times*/
230 	*sdram_addr = 0xff;
231 	udelay(100);
232 	/*5 times*/
233 	*sdram_addr = 0xff;
234 	udelay(100);
235 	/*6 times*/
236 	*sdram_addr = 0xff;
237 	udelay(100);
238 	/*7 times*/
239 	*sdram_addr = 0xff;
240 	udelay(100);
241 	/*8 times*/
242 	*sdram_addr = 0xff;
243 	udelay(100);
244 
245 	/* 0x58636733; mode register write operation */
246 	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
247 	asm("sync");
248 	*sdram_addr = 0xff;
249 	udelay(100);
250 
251 	lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */
252 	asm("sync");
253 	*sdram_addr = 0xff;
254 	udelay(100);
255 }
256 #else
257 void sdram_init(void)
258 {
259 }
260 #endif
261 
262 /*
263  * The following are used to control the SPI chip selects for the SPI command.
264  */
265 #ifdef CONFIG_MPC8XXX_SPI
266 
267 #define SPI_CS_MASK	0x80000000
268 
269 int spi_cs_is_valid(unsigned int bus, unsigned int cs)
270 {
271 	return bus == 0 && cs == 0;
272 }
273 
274 void spi_cs_activate(struct spi_slave *slave)
275 {
276 	volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
277 
278 	iopd->dat &= ~SPI_CS_MASK;
279 }
280 
281 void spi_cs_deactivate(struct spi_slave *slave)
282 {
283 	volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
284 
285 	iopd->dat |=  SPI_CS_MASK;
286 }
287 #endif /* CONFIG_HARD_SPI */
288 
289 #if defined(CONFIG_OF_BOARD_SETUP)
290 void ft_board_setup(void *blob, bd_t *bd)
291 {
292 	ft_cpu_setup(blob, bd);
293 #ifdef CONFIG_PCI
294 	ft_pci_setup(blob, bd);
295 #endif
296 }
297 #endif
298