1 /* 2 * (C) Copyright 2006 3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4 * 5 * See file CREDITS for list of people who contributed to this 6 * project. 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of 11 * the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21 * MA 02111-1307 USA 22 * 23 */ 24 25 #include <common.h> 26 #include <ioports.h> 27 #include <mpc83xx.h> 28 #include <asm/mpc8349_pci.h> 29 #include <i2c.h> 30 #include <spi.h> 31 #include <miiphy.h> 32 #include <spd_sdram.h> 33 34 #if defined(CONFIG_OF_LIBFDT) 35 #include <libfdt.h> 36 #endif 37 38 int fixed_sdram(void); 39 void sdram_init(void); 40 41 #if defined(CONFIG_DDR_ECC) && defined(CONFIG_MPC83xx) 42 void ddr_enable_ecc(unsigned int dram_size); 43 #endif 44 45 int board_early_init_f (void) 46 { 47 volatile u8* bcsr = (volatile u8*)CONFIG_SYS_BCSR; 48 49 /* Enable flash write */ 50 bcsr[1] &= ~0x01; 51 52 #ifdef CONFIG_SYS_USE_MPC834XSYS_USB_PHY 53 /* Use USB PHY on SYS board */ 54 bcsr[5] |= 0x02; 55 #endif 56 57 return 0; 58 } 59 60 #define ns2clk(ns) (ns / (1000000000 / CONFIG_8349_CLKIN) + 1) 61 62 phys_size_t initdram (int board_type) 63 { 64 volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; 65 u32 msize = 0; 66 67 if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) 68 return -1; 69 70 /* DDR SDRAM - Main SODIMM */ 71 im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR; 72 #if defined(CONFIG_SPD_EEPROM) 73 msize = spd_sdram(); 74 #else 75 msize = fixed_sdram(); 76 #endif 77 /* 78 * Initialize SDRAM if it is on local bus. 79 */ 80 sdram_init(); 81 82 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) 83 /* 84 * Initialize and enable DDR ECC. 85 */ 86 ddr_enable_ecc(msize * 1024 * 1024); 87 #endif 88 89 /* return total bus SDRAM size(bytes) -- DDR */ 90 return (msize * 1024 * 1024); 91 } 92 93 #if !defined(CONFIG_SPD_EEPROM) 94 /************************************************************************* 95 * fixed sdram init -- doesn't use serial presence detect. 96 ************************************************************************/ 97 int fixed_sdram(void) 98 { 99 volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; 100 u32 msize = 0; 101 u32 ddr_size; 102 u32 ddr_size_log2; 103 104 msize = CONFIG_SYS_DDR_SIZE; 105 for (ddr_size = msize << 20, ddr_size_log2 = 0; 106 (ddr_size > 1); 107 ddr_size = ddr_size>>1, ddr_size_log2++) { 108 if (ddr_size & 1) { 109 return -1; 110 } 111 } 112 im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000; 113 im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); 114 115 #if (CONFIG_SYS_DDR_SIZE != 256) 116 #warning Currenly any ddr size other than 256 is not supported 117 #endif 118 #ifdef CONFIG_DDR_II 119 im->ddr.csbnds[2].csbnds = CONFIG_SYS_DDR_CS2_BNDS; 120 im->ddr.cs_config[2] = CONFIG_SYS_DDR_CS2_CONFIG; 121 im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; 122 im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; 123 im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; 124 im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; 125 im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG; 126 im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2; 127 im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE; 128 im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2; 129 im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL; 130 im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL; 131 #else 132 im->ddr.csbnds[2].csbnds = 0x0000000f; 133 im->ddr.cs_config[2] = CONFIG_SYS_DDR_CONFIG; 134 135 /* currently we use only one CS, so disable the other banks */ 136 im->ddr.cs_config[0] = 0; 137 im->ddr.cs_config[1] = 0; 138 im->ddr.cs_config[3] = 0; 139 140 im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; 141 im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; 142 143 im->ddr.sdram_cfg = 144 SDRAM_CFG_SREN 145 #if defined(CONFIG_DDR_2T_TIMING) 146 | SDRAM_CFG_2T_EN 147 #endif 148 | 2 << SDRAM_CFG_SDRAM_TYPE_SHIFT; 149 #if defined (CONFIG_DDR_32BIT) 150 /* for 32-bit mode burst length is 8 */ 151 im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE); 152 #endif 153 im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE; 154 155 im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL; 156 #endif 157 udelay(200); 158 159 /* enable DDR controller */ 160 im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; 161 return msize; 162 } 163 #endif/*!CONFIG_SYS_SPD_EEPROM*/ 164 165 166 int checkboard (void) 167 { 168 /* 169 * Warning: do not read the BCSR registers here 170 * 171 * There is a timing bug in the 8349E and 8349EA BCSR code 172 * version 1.2 (read from BCSR 11) that will cause the CFI 173 * flash initialization code to overwrite BCSR 0, disabling 174 * the serial ports and gigabit ethernet 175 */ 176 177 puts("Board: Freescale MPC8349EMDS\n"); 178 return 0; 179 } 180 181 /* 182 * if MPC8349EMDS is soldered with SDRAM 183 */ 184 #if defined(CONFIG_SYS_BR2_PRELIM) \ 185 && defined(CONFIG_SYS_OR2_PRELIM) \ 186 && defined(CONFIG_SYS_LBLAWBAR2_PRELIM) \ 187 && defined(CONFIG_SYS_LBLAWAR2_PRELIM) 188 /* 189 * Initialize SDRAM memory on the Local Bus. 190 */ 191 192 void sdram_init(void) 193 { 194 volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; 195 volatile fsl_lbc_t *lbc = &immap->im_lbc; 196 uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; 197 198 /* 199 * Setup SDRAM Base and Option Registers, already done in cpu_init.c 200 */ 201 202 /* setup mtrpt, lsrt and lbcr for LB bus */ 203 lbc->lbcr = CONFIG_SYS_LBC_LBCR; 204 lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; 205 lbc->lsrt = CONFIG_SYS_LBC_LSRT; 206 asm("sync"); 207 208 /* 209 * Configure the SDRAM controller Machine Mode Register. 210 */ 211 lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */ 212 213 lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */ 214 asm("sync"); 215 *sdram_addr = 0xff; 216 udelay(100); 217 218 lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2; /* 0x48636733; auto refresh */ 219 asm("sync"); 220 /*1 times*/ 221 *sdram_addr = 0xff; 222 udelay(100); 223 /*2 times*/ 224 *sdram_addr = 0xff; 225 udelay(100); 226 /*3 times*/ 227 *sdram_addr = 0xff; 228 udelay(100); 229 /*4 times*/ 230 *sdram_addr = 0xff; 231 udelay(100); 232 /*5 times*/ 233 *sdram_addr = 0xff; 234 udelay(100); 235 /*6 times*/ 236 *sdram_addr = 0xff; 237 udelay(100); 238 /*7 times*/ 239 *sdram_addr = 0xff; 240 udelay(100); 241 /*8 times*/ 242 *sdram_addr = 0xff; 243 udelay(100); 244 245 /* 0x58636733; mode register write operation */ 246 lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4; 247 asm("sync"); 248 *sdram_addr = 0xff; 249 udelay(100); 250 251 lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */ 252 asm("sync"); 253 *sdram_addr = 0xff; 254 udelay(100); 255 } 256 #else 257 void sdram_init(void) 258 { 259 } 260 #endif 261 262 /* 263 * The following are used to control the SPI chip selects for the SPI command. 264 */ 265 #ifdef CONFIG_MPC8XXX_SPI 266 267 #define SPI_CS_MASK 0x80000000 268 269 int spi_cs_is_valid(unsigned int bus, unsigned int cs) 270 { 271 return bus == 0 && cs == 0; 272 } 273 274 void spi_cs_activate(struct spi_slave *slave) 275 { 276 volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0]; 277 278 iopd->dat &= ~SPI_CS_MASK; 279 } 280 281 void spi_cs_deactivate(struct spi_slave *slave) 282 { 283 volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0]; 284 285 iopd->dat |= SPI_CS_MASK; 286 } 287 #endif /* CONFIG_HARD_SPI */ 288 289 #if defined(CONFIG_OF_BOARD_SETUP) 290 void ft_board_setup(void *blob, bd_t *bd) 291 { 292 ft_cpu_setup(blob, bd); 293 #ifdef CONFIG_PCI 294 ft_pci_setup(blob, bd); 295 #endif 296 } 297 #endif 298