1 /* 2 * Copyright (C) 2006 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 */ 12 13 /* 14 * PCI Configuration space access support for MPC83xx PCI Bridge 15 */ 16 #include <asm/mmu.h> 17 #include <asm/io.h> 18 #include <common.h> 19 #include <pci.h> 20 #include <i2c.h> 21 #if defined(CONFIG_OF_LIBFDT) 22 #include <libfdt.h> 23 #include <fdt_support.h> 24 #endif 25 26 #include <asm/fsl_i2c.h> 27 28 DECLARE_GLOBAL_DATA_PTR; 29 30 #if defined(CONFIG_PCI) 31 #define PCI_FUNCTION_CONFIG 0x44 32 #define PCI_FUNCTION_CFG_LOCK 0x20 33 34 /* 35 * Initialize PCI Devices, report devices found 36 */ 37 #ifndef CONFIG_PCI_PNP 38 static struct pci_config_table pci_mpc83xxemds_config_table[] = { 39 { 40 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 41 pci_cfgfunc_config_device, 42 {PCI_ENET0_IOADDR, 43 PCI_ENET0_MEMADDR, 44 PCI_COMMON_MEMORY | PCI_COMMAND_MASTER} 45 }, 46 {} 47 } 48 #endif 49 static struct pci_controller hose[] = { 50 { 51 #ifndef CONFIG_PCI_PNP 52 config_table:pci_mpc83xxemds_config_table, 53 #endif 54 }, 55 }; 56 57 /********************************************************************** 58 * pci_init_board() 59 *********************************************************************/ 60 void pci_init_board(void) 61 #ifdef CONFIG_PCISLAVE 62 { 63 u16 reg16; 64 volatile immap_t *immr; 65 volatile law83xx_t *pci_law; 66 volatile pot83xx_t *pci_pot; 67 volatile pcictrl83xx_t *pci_ctrl; 68 volatile pciconf83xx_t *pci_conf; 69 70 immr = (immap_t *) CONFIG_SYS_IMMR; 71 pci_law = immr->sysconf.pcilaw; 72 pci_pot = immr->ios.pot; 73 pci_ctrl = immr->pci_ctrl; 74 pci_conf = immr->pci_conf; 75 /* 76 * Configure PCI Inbound Translation Windows 77 */ 78 pci_ctrl[0].pitar0 = 0x0; 79 pci_ctrl[0].pibar0 = 0x0; 80 pci_ctrl[0].piwar0 = PIWAR_EN | PIWAR_RTT_SNOOP | 81 PIWAR_WTT_SNOOP | PIWAR_IWS_4K; 82 83 pci_ctrl[0].pitar1 = 0x0; 84 pci_ctrl[0].pibar1 = 0x0; 85 pci_ctrl[0].piebar1 = 0x0; 86 pci_ctrl[0].piwar1 &= ~PIWAR_EN; 87 88 pci_ctrl[0].pitar2 = 0x0; 89 pci_ctrl[0].pibar2 = 0x0; 90 pci_ctrl[0].piebar2 = 0x0; 91 pci_ctrl[0].piwar2 &= ~PIWAR_EN; 92 93 hose[0].first_busno = 0; 94 hose[0].last_busno = 0xff; 95 pci_setup_indirect(&hose[0], 96 (CONFIG_SYS_IMMR + 0x8300), (CONFIG_SYS_IMMR + 0x8304)); 97 reg16 = 0xff; 98 99 pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), 100 PCI_COMMAND, ®16); 101 reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MEMORY; 102 pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), 103 PCI_COMMAND, reg16); 104 105 /* 106 * Clear non-reserved bits in status register. 107 */ 108 pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), 109 PCI_STATUS, 0xffff); 110 pci_hose_write_config_byte(&hose[0], PCI_BDF(0, 0, 0), 111 PCI_LATENCY_TIMER, 0x80); 112 113 /* 114 * Unlock configuration lock in PCI function configuration register. 115 */ 116 pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), 117 PCI_FUNCTION_CONFIG, ®16); 118 reg16 &= ~(PCI_FUNCTION_CFG_LOCK); 119 pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), 120 PCI_FUNCTION_CONFIG, reg16); 121 122 printf("Enabled PCI 32bit Agent Mode\n"); 123 } 124 #else 125 { 126 volatile immap_t *immr; 127 volatile clk83xx_t *clk; 128 volatile law83xx_t *pci_law; 129 volatile pot83xx_t *pci_pot; 130 volatile pcictrl83xx_t *pci_ctrl; 131 volatile pciconf83xx_t *pci_conf; 132 133 u16 reg16; 134 u32 val32; 135 u32 dev; 136 137 immr = (immap_t *) CONFIG_SYS_IMMR; 138 clk = (clk83xx_t *) & immr->clk; 139 pci_law = immr->sysconf.pcilaw; 140 pci_pot = immr->ios.pot; 141 pci_ctrl = immr->pci_ctrl; 142 pci_conf = immr->pci_conf; 143 /* 144 * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode 145 */ 146 val32 = clk->occr; 147 udelay(2000); 148 #if defined(PCI_66M) 149 clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; 150 printf("PCI clock is 66MHz\n"); 151 #elif defined(PCI_33M) 152 clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 | 153 OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 | OCCR_PCICR; 154 printf("PCI clock is 33MHz\n"); 155 #else 156 clk->occr = OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2; 157 printf("PCI clock is 66MHz\n"); 158 #endif 159 udelay(2000); 160 161 /* 162 * Configure PCI Local Access Windows 163 */ 164 pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR; 165 pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M; 166 167 pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR; 168 pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_1M; 169 170 /* 171 * Configure PCI Outbound Translation Windows 172 */ 173 174 /* PCI mem space - prefetch */ 175 pci_pot[0].potar = (CONFIG_SYS_PCI_MEM_BASE >> 12) & POTAR_TA_MASK; 176 pci_pot[0].pobar = (CONFIG_SYS_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK; 177 pci_pot[0].pocmr = 178 POCMR_EN | POCMR_SE | (POCMR_CM_256M & POCMR_CM_MASK); 179 180 /* PCI mmio - non-prefetch mem space */ 181 pci_pot[1].potar = (CONFIG_SYS_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK; 182 pci_pot[1].pobar = (CONFIG_SYS_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK; 183 pci_pot[1].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK); 184 185 /* PCI IO space */ 186 pci_pot[2].potar = (CONFIG_SYS_PCI_IO_BASE >> 12) & POTAR_TA_MASK; 187 pci_pot[2].pobar = (CONFIG_SYS_PCI_IO_PHYS >> 12) & POBAR_BA_MASK; 188 pci_pot[2].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); 189 190 /* 191 * Configure PCI Inbound Translation Windows 192 */ 193 pci_ctrl[0].pitar1 = (CONFIG_SYS_PCI_SLV_MEM_LOCAL >> 12) & PITAR_TA_MASK; 194 pci_ctrl[0].pibar1 = (CONFIG_SYS_PCI_SLV_MEM_BUS >> 12) & PIBAR_MASK; 195 pci_ctrl[0].piebar1 = 0x0; 196 pci_ctrl[0].piwar1 = 197 PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | 198 PIWAR_IWS_2G; 199 200 /* 201 * Release PCI RST Output signal 202 */ 203 udelay(2000); 204 pci_ctrl[0].gcr = 1; 205 udelay(2000); 206 207 hose[0].first_busno = 0; 208 hose[0].last_busno = 0xff; 209 210 /* PCI memory prefetch space */ 211 pci_set_region(hose[0].regions + 0, 212 CONFIG_SYS_PCI_MEM_BASE, 213 CONFIG_SYS_PCI_MEM_PHYS, 214 CONFIG_SYS_PCI_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH); 215 216 /* PCI memory space */ 217 pci_set_region(hose[0].regions + 1, 218 CONFIG_SYS_PCI_MMIO_BASE, 219 CONFIG_SYS_PCI_MMIO_PHYS, CONFIG_SYS_PCI_MMIO_SIZE, PCI_REGION_MEM); 220 221 /* PCI IO space */ 222 pci_set_region(hose[0].regions + 2, 223 CONFIG_SYS_PCI_IO_BASE, 224 CONFIG_SYS_PCI_IO_PHYS, CONFIG_SYS_PCI_IO_SIZE, PCI_REGION_IO); 225 226 /* System memory space */ 227 pci_set_region(hose[0].regions + 3, 228 CONFIG_SYS_PCI_SLV_MEM_LOCAL, 229 CONFIG_SYS_PCI_SLV_MEM_BUS, 230 CONFIG_SYS_PCI_SLV_MEM_SIZE, 231 PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); 232 233 hose[0].region_count = 4; 234 235 pci_setup_indirect(&hose[0], 236 (CONFIG_SYS_IMMR + 0x8300), (CONFIG_SYS_IMMR + 0x8304)); 237 238 pci_register_hose(hose); 239 240 /* 241 * Write command register 242 */ 243 reg16 = 0xff; 244 dev = PCI_BDF(0, 0, 0); 245 pci_hose_read_config_word(&hose[0], dev, PCI_COMMAND, ®16); 246 reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; 247 pci_hose_write_config_word(&hose[0], dev, PCI_COMMAND, reg16); 248 249 /* 250 * Clear non-reserved bits in status register. 251 */ 252 pci_hose_write_config_word(&hose[0], dev, PCI_STATUS, 0xffff); 253 pci_hose_write_config_byte(&hose[0], dev, PCI_LATENCY_TIMER, 0x80); 254 pci_hose_write_config_byte(&hose[0], dev, PCI_CACHE_LINE_SIZE, 0x08); 255 256 /* 257 * Hose scan. 258 */ 259 hose->last_busno = pci_hose_scan(hose); 260 } 261 #endif /* CONFIG_PCISLAVE */ 262 263 #if defined(CONFIG_OF_LIBFDT) 264 void ft_pci_setup(void *blob, bd_t *bd) 265 { 266 int nodeoffset; 267 int tmp[2]; 268 const char *path; 269 270 nodeoffset = fdt_path_offset(blob, "/aliases"); 271 if (nodeoffset >= 0) { 272 path = fdt_getprop(blob, nodeoffset, "pci0", NULL); 273 if (path) { 274 tmp[0] = cpu_to_be32(hose[0].first_busno); 275 tmp[1] = cpu_to_be32(hose[0].last_busno); 276 do_fixup_by_path(blob, path, "bus-range", 277 &tmp, sizeof(tmp), 1); 278 279 tmp[0] = cpu_to_be32(gd->pci_clk); 280 do_fixup_by_path(blob, path, "clock-frequency", 281 &tmp, sizeof(tmp[0]), 1); 282 } 283 } 284 } 285 #endif /* CONFIG_OF_LIBFDT */ 286 #endif /* CONFIG_PCI */ 287