1 /*
2  * Copyright (C) 2007 Freescale Semiconductor, Inc.
3  *
4  * Michael Barkowski <michael.barkowski@freescale.com>
5  * Based on mpc832xmds file by Dave Liu <daveliu@freescale.com>
6  *
7  * This program is free software; you can redistribute it and/or modify it
8  * under the terms of the GNU General Public License version 2 as published
9  * by the Free Software Foundation.
10  */
11 
12 #include <common.h>
13 #include <ioports.h>
14 #include <mpc83xx.h>
15 #include <i2c.h>
16 #include <miiphy.h>
17 #include <command.h>
18 #include <libfdt.h>
19 #if defined(CONFIG_PCI)
20 #include <pci.h>
21 #endif
22 #include <asm/mmu.h>
23 
24 const qe_iop_conf_t qe_iop_conf_tab[] = {
25 	/* UCC3 */
26 	{1,  0, 1, 0, 1}, /* TxD0 */
27 	{1,  1, 1, 0, 1}, /* TxD1 */
28 	{1,  2, 1, 0, 1}, /* TxD2 */
29 	{1,  3, 1, 0, 1}, /* TxD3 */
30 	{1,  9, 1, 0, 1}, /* TxER */
31 	{1, 12, 1, 0, 1}, /* TxEN */
32 	{3, 24, 2, 0, 1}, /* TxCLK->CLK10 */
33 
34 	{1,  4, 2, 0, 1}, /* RxD0 */
35 	{1,  5, 2, 0, 1}, /* RxD1 */
36 	{1,  6, 2, 0, 1}, /* RxD2 */
37 	{1,  7, 2, 0, 1}, /* RxD3 */
38 	{1,  8, 2, 0, 1}, /* RxER */
39 	{1, 10, 2, 0, 1}, /* RxDV */
40 	{0, 13, 2, 0, 1}, /* RxCLK->CLK9 */
41 	{1, 11, 2, 0, 1}, /* COL */
42 	{1, 13, 2, 0, 1}, /* CRS */
43 
44 	/* UCC2 */
45 	{0, 18, 1, 0, 1}, /* TxD0 */
46 	{0, 19, 1, 0, 1}, /* TxD1 */
47 	{0, 20, 1, 0, 1}, /* TxD2 */
48 	{0, 21, 1, 0, 1}, /* TxD3 */
49 	{0, 27, 1, 0, 1}, /* TxER */
50 	{0, 30, 1, 0, 1}, /* TxEN */
51 	{3, 23, 2, 0, 1}, /* TxCLK->CLK3 */
52 
53 	{0, 22, 2, 0, 1}, /* RxD0 */
54 	{0, 23, 2, 0, 1}, /* RxD1 */
55 	{0, 24, 2, 0, 1}, /* RxD2 */
56 	{0, 25, 2, 0, 1}, /* RxD3 */
57 	{0, 26, 1, 0, 1}, /* RxER */
58 	{0, 28, 2, 0, 1}, /* Rx_DV */
59 	{3, 21, 2, 0, 1}, /* RxCLK->CLK16 */
60 	{0, 29, 2, 0, 1}, /* COL */
61 	{0, 31, 2, 0, 1}, /* CRS */
62 
63 	{3,  4, 3, 0, 2}, /* MDIO */
64 	{3,  5, 1, 0, 2}, /* MDC */
65 
66 	{0,  0, 0, 0, QE_IOP_TAB_END}, /* END of table */
67 };
68 
69 int board_early_init_f(void)
70 {
71 	return 0;
72 }
73 
74 int fixed_sdram(void);
75 
76 phys_size_t initdram(int board_type)
77 {
78 	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
79 	u32 msize = 0;
80 
81 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
82 		return -1;
83 
84 	/* DDR SDRAM - Main SODIMM */
85 	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
86 
87 	msize = fixed_sdram();
88 
89 	/* return total bus SDRAM size(bytes)  -- DDR */
90 	return (msize * 1024 * 1024);
91 }
92 
93 /*************************************************************************
94  *  fixed sdram init -- doesn't use serial presence detect.
95  ************************************************************************/
96 int fixed_sdram(void)
97 {
98 	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
99 	u32 msize = 0;
100 	u32 ddr_size;
101 	u32 ddr_size_log2;
102 
103 	msize = CONFIG_SYS_DDR_SIZE;
104 	for (ddr_size = msize << 20, ddr_size_log2 = 0;
105 	     (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
106 		if (ddr_size & 1) {
107 			return -1;
108 		}
109 	}
110 	im->sysconf.ddrlaw[0].ar =
111 	    LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
112 	im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
113 	im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
114 	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
115 	im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
116 	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
117 	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
118 	im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
119 	im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
120 	im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
121 	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
122 	im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
123 	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
124 	__asm__ __volatile__ ("sync");
125 	udelay(200);
126 
127 	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
128 	__asm__ __volatile__ ("sync");
129 	return msize;
130 }
131 
132 int checkboard(void)
133 {
134 	puts("Board: Freescale MPC8323ERDB\n");
135 	return 0;
136 }
137 
138 static struct pci_region pci_regions[] = {
139 	{
140 		bus_start: CONFIG_SYS_PCI1_MEM_BASE,
141 		phys_start: CONFIG_SYS_PCI1_MEM_PHYS,
142 		size: CONFIG_SYS_PCI1_MEM_SIZE,
143 		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
144 	},
145 	{
146 		bus_start: CONFIG_SYS_PCI1_MMIO_BASE,
147 		phys_start: CONFIG_SYS_PCI1_MMIO_PHYS,
148 		size: CONFIG_SYS_PCI1_MMIO_SIZE,
149 		flags: PCI_REGION_MEM
150 	},
151 	{
152 		bus_start: CONFIG_SYS_PCI1_IO_BASE,
153 		phys_start: CONFIG_SYS_PCI1_IO_PHYS,
154 		size: CONFIG_SYS_PCI1_IO_SIZE,
155 		flags: PCI_REGION_IO
156 	}
157 };
158 
159 void pci_init_board(void)
160 {
161 	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
162 	volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
163 	volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
164 	struct pci_region *reg[] = { pci_regions };
165 
166 	/* Enable all 3 PCI_CLK_OUTPUTs. */
167 	clk->occr |= 0xe0000000;
168 
169 	/* Configure PCI Local Access Windows */
170 	pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
171 	pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
172 
173 	pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
174 	pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
175 
176 	mpc83xx_pci_init(1, reg);
177 }
178 
179 #if defined(CONFIG_OF_BOARD_SETUP)
180 void ft_board_setup(void *blob, bd_t *bd)
181 {
182 	ft_cpu_setup(blob, bd);
183 #ifdef CONFIG_PCI
184 	ft_pci_setup(blob, bd);
185 #endif
186 }
187 #endif
188 
189 #if defined(CONFIG_SYS_I2C_MAC_OFFSET)
190 int mac_read_from_eeprom(void)
191 {
192 	uchar buf[28];
193 	char str[18];
194 	int i = 0;
195 	unsigned int crc = 0;
196 	unsigned char enetvar[32];
197 
198 	/* Read MAC addresses from EEPROM */
199 	if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, CONFIG_SYS_I2C_MAC_OFFSET, buf, 28)) {
200 		printf("\nEEPROM @ 0x%02x read FAILED!!!\n",
201 		       CONFIG_SYS_I2C_EEPROM_ADDR);
202 	} else {
203 		if (crc32(crc, buf, 24) == *(unsigned int *)&buf[24]) {
204 			printf("Reading MAC from EEPROM\n");
205 			for (i = 0; i < 4; i++) {
206 				if (memcmp(&buf[i * 6], "\0\0\0\0\0\0", 6)) {
207 					sprintf(str,
208 						"%02X:%02X:%02X:%02X:%02X:%02X",
209 						buf[i * 6], buf[i * 6 + 1],
210 						buf[i * 6 + 2], buf[i * 6 + 3],
211 						buf[i * 6 + 4], buf[i * 6 + 5]);
212 					sprintf((char *)enetvar,
213 						i ? "eth%daddr" : "ethaddr", i);
214 					setenv((char *)enetvar, str);
215 				}
216 			}
217 		}
218 	}
219 	return 0;
220 }
221 #endif				/* CONFIG_I2C_MAC_OFFSET */
222