1 /*
2  * Copyright (C) 2007 Freescale Semiconductor, Inc.
3  *
4  * Authors: Nick.Spence@freescale.com
5  *          Wilson.Lo@freescale.com
6  *          scottwood@freescale.com
7  *
8  * SPDX-License-Identifier:	GPL-2.0+
9  */
10 
11 #include <common.h>
12 #include <mpc83xx.h>
13 #include <spd_sdram.h>
14 
15 #include <asm/bitops.h>
16 #include <asm/io.h>
17 
18 #include <asm/processor.h>
19 
20 DECLARE_GLOBAL_DATA_PTR;
21 
22 static void resume_from_sleep(void)
23 {
24 	u32 magic = *(u32 *)0;
25 
26 	typedef void (*func_t)(void);
27 	func_t resume = *(func_t *)4;
28 
29 	if (magic == 0xf5153ae5)
30 		resume();
31 
32 	gd->flags &= ~GD_FLG_SILENT;
33 	puts("\nResume from sleep failed: bad magic word\n");
34 }
35 
36 /* Fixed sdram init -- doesn't use serial presence detect.
37  *
38  * This is useful for faster booting in configs where the RAM is unlikely
39  * to be changed, or for things like NAND booting where space is tight.
40  */
41 #ifndef CONFIG_SYS_RAMBOOT
42 static long fixed_sdram(void)
43 {
44 	volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
45 	u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
46 	u32 msize_log2 = __ilog2(msize);
47 
48 	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE  & 0xfffff000;
49 	im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
50 	im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE;
51 
52 	/*
53 	 * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg],
54 	 * or the DDR2 controller may fail to initialize correctly.
55 	 */
56 	__udelay(50000);
57 
58 	im->ddr.csbnds[0].csbnds = (msize - 1) >> 24;
59 	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
60 
61 	/* Currently we use only one CS, so disable the other bank. */
62 	im->ddr.cs_config[1] = 0;
63 
64 	im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL;
65 	im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
66 	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
67 	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
68 	im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
69 
70 	if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
71 		im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG | SDRAM_CFG_BI;
72 	else
73 		im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
74 
75 	im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
76 	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
77 	im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
78 
79 	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
80 	sync();
81 
82 	/* enable DDR controller */
83 	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
84 	sync();
85 
86 	return msize;
87 }
88 #else
89 static long fixed_sdram(void)
90 {
91 	return CONFIG_SYS_DDR_SIZE * 1024 * 1024;
92 }
93 #endif /* CONFIG_SYS_RAMBOOT */
94 
95 phys_size_t initdram(int board_type)
96 {
97 	volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
98 	u32 msize;
99 
100 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
101 		return -1;
102 
103 	/* DDR SDRAM */
104 	msize = fixed_sdram();
105 
106 	if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
107 		resume_from_sleep();
108 
109 	/* return total bus SDRAM size(bytes)  -- DDR */
110 	return msize;
111 }
112