1 /* 2 * Copyright (C) Freescale Semiconductor, Inc. 2006-2007 3 * 4 * Author: Scott Wood <scottwood@freescale.com> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #include <common.h> 10 #if defined(CONFIG_OF_LIBFDT) 11 #include <libfdt.h> 12 #endif 13 #include <pci.h> 14 #include <mpc83xx.h> 15 #include <vsc7385.h> 16 #include <ns16550.h> 17 #include <nand.h> 18 #if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_SPL_BUILD) 19 #include <asm/gpio.h> 20 #endif 21 22 DECLARE_GLOBAL_DATA_PTR; 23 24 int board_early_init_f(void) 25 { 26 #ifndef CONFIG_SYS_8313ERDB_BROKEN_PMC 27 volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; 28 29 if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) 30 gd->flags |= GD_FLG_SILENT; 31 #endif 32 #if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_SPL_BUILD) 33 mpc83xx_gpio_init_f(); 34 #endif 35 36 return 0; 37 } 38 39 int board_early_init_r(void) 40 { 41 #if defined(CONFIG_MPC83XX_GPIO) && !defined(CONFIG_SPL_BUILD) 42 mpc83xx_gpio_init_r(); 43 #endif 44 45 return 0; 46 } 47 48 int checkboard(void) 49 { 50 puts("Board: Freescale MPC8313ERDB\n"); 51 return 0; 52 } 53 54 #ifndef CONFIG_SPL_BUILD 55 static struct pci_region pci_regions[] = { 56 { 57 .bus_start = CONFIG_SYS_PCI1_MEM_BASE, 58 .phys_start = CONFIG_SYS_PCI1_MEM_PHYS, 59 .size = CONFIG_SYS_PCI1_MEM_SIZE, 60 .flags = PCI_REGION_MEM | PCI_REGION_PREFETCH 61 }, 62 { 63 .bus_start = CONFIG_SYS_PCI1_MMIO_BASE, 64 .phys_start = CONFIG_SYS_PCI1_MMIO_PHYS, 65 .size = CONFIG_SYS_PCI1_MMIO_SIZE, 66 .flags = PCI_REGION_MEM 67 }, 68 { 69 .bus_start = CONFIG_SYS_PCI1_IO_BASE, 70 .phys_start = CONFIG_SYS_PCI1_IO_PHYS, 71 .size = CONFIG_SYS_PCI1_IO_SIZE, 72 .flags = PCI_REGION_IO 73 } 74 }; 75 76 void pci_init_board(void) 77 { 78 volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR; 79 volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; 80 volatile law83xx_t *pci_law = immr->sysconf.pcilaw; 81 struct pci_region *reg[] = { pci_regions }; 82 83 /* Enable all 3 PCI_CLK_OUTPUTs. */ 84 clk->occr |= 0xe0000000; 85 86 /* 87 * Configure PCI Local Access Windows 88 */ 89 pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR; 90 pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB; 91 92 pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR; 93 pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB; 94 95 mpc83xx_pci_init(1, reg); 96 } 97 98 /* 99 * Miscellaneous late-boot configurations 100 * 101 * If a VSC7385 microcode image is present, then upload it. 102 */ 103 int misc_init_r(void) 104 { 105 int rc = 0; 106 107 #ifdef CONFIG_VSC7385_IMAGE 108 if (vsc7385_upload_firmware((void *) CONFIG_VSC7385_IMAGE, 109 CONFIG_VSC7385_IMAGE_SIZE)) { 110 puts("Failure uploading VSC7385 microcode.\n"); 111 rc = 1; 112 } 113 #endif 114 115 return rc; 116 } 117 118 #if defined(CONFIG_OF_BOARD_SETUP) 119 int ft_board_setup(void *blob, bd_t *bd) 120 { 121 ft_cpu_setup(blob, bd); 122 #ifdef CONFIG_PCI 123 ft_pci_setup(blob, bd); 124 #endif 125 126 return 0; 127 } 128 #endif 129 #else /* CONFIG_SPL_BUILD */ 130 void board_init_f(ulong bootflag) 131 { 132 board_early_init_f(); 133 NS16550_init((NS16550_t)(CONFIG_SYS_IMMR + 0x4500), 134 CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE); 135 puts("NAND boot... "); 136 timer_init(); 137 initdram(0); 138 relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, (gd_t *)gd, 139 CONFIG_SYS_NAND_U_BOOT_RELOC); 140 } 141 142 void board_init_r(gd_t *gd, ulong dest_addr) 143 { 144 nand_boot(); 145 } 146 147 void putc(char c) 148 { 149 if (gd->flags & GD_FLG_SILENT) 150 return; 151 152 if (c == '\n') 153 NS16550_putc((NS16550_t)(CONFIG_SYS_IMMR + 0x4500), '\r'); 154 155 NS16550_putc((NS16550_t)(CONFIG_SYS_IMMR + 0x4500), c); 156 } 157 #endif 158