1 /*
2  * (C) Copyright 2000-2003
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  *
5  * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
6  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
7  *
8  * See file CREDITS for list of people who contributed to this
9  * project.
10  *
11  * This program is free software; you can redistribute it and/or
12  * modify it under the terms of the GNU General Public License as
13  * published by the Free Software Foundation; either version 2 of
14  * the License, or (at your option) any later version.
15  *
16  * This program is distributed in the hope that it will be useful,
17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19  * GNU General Public License for more details.
20  *
21  * You should have received a copy of the GNU General Public License
22  * along with this program; if not, write to the Free Software
23  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
24  * MA 02111-1307 USA
25  */
26 
27 #include <common.h>
28 #include <pci.h>
29 #include <asm/immap.h>
30 
31 DECLARE_GLOBAL_DATA_PTR;
32 
33 int checkboard(void)
34 {
35 	puts("Board: ");
36 	puts("Freescale M54455 EVB\n");
37 	return 0;
38 };
39 
40 phys_size_t initdram(int board_type)
41 {
42 	u32 dramsize;
43 #ifdef CONFIG_CF_SBF
44 	/*
45 	 * Serial Boot: The dram is already initialized in start.S
46 	 * only require to return DRAM size
47 	 */
48 	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000 >> 1;
49 #else
50 	volatile sdramc_t *sdram = (volatile sdramc_t *)(MMAP_SDRAM);
51 	volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO);
52 	u32 i;
53 
54 	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000 >> 1;
55 
56 	for (i = 0x13; i < 0x20; i++) {
57 		if (dramsize == (1 << i))
58 			break;
59 	}
60 	i--;
61 
62 	gpio->mscr_sdram = CONFIG_SYS_SDRAM_DRV_STRENGTH;
63 
64 	sdram->sdcs0 = (CONFIG_SYS_SDRAM_BASE | i);
65 	sdram->sdcs1 = (CONFIG_SYS_SDRAM_BASE1 | i);
66 
67 	sdram->sdcfg1 = CONFIG_SYS_SDRAM_CFG1;
68 	sdram->sdcfg2 = CONFIG_SYS_SDRAM_CFG2;
69 
70 	/* Issue PALL */
71 	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2;
72 
73 	/* Issue LEMR */
74 	sdram->sdmr = CONFIG_SYS_SDRAM_EMOD | 0x408;
75 	sdram->sdmr = CONFIG_SYS_SDRAM_MODE | 0x300;
76 
77 	udelay(500);
78 
79 	/* Issue PALL */
80 	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2;
81 
82 	/* Perform two refresh cycles */
83 	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4;
84 	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4;
85 
86 	sdram->sdmr = CONFIG_SYS_SDRAM_MODE | 0x200;
87 
88 	sdram->sdcr = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00;
89 
90 	udelay(100);
91 #endif
92 	return (dramsize << 1);
93 };
94 
95 int testdram(void)
96 {
97 	/* TODO: XXX XXX XXX */
98 	printf("DRAM test not implemented!\n");
99 
100 	return (0);
101 }
102 
103 #if defined(CONFIG_CMD_IDE)
104 #include <ata.h>
105 
106 int ide_preinit(void)
107 {
108 	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
109 
110 	gpio->par_fec |= (gpio->par_fec & GPIO_PAR_FEC_FEC1_UNMASK) | 0x10;
111 	gpio->par_feci2c |=
112 	    (gpio->par_feci2c & 0xF0FF) | (GPIO_PAR_FECI2C_MDC1_ATA_DIOR |
113 					   GPIO_PAR_FECI2C_MDIO1_ATA_DIOW);
114 	gpio->par_ata |=
115 	    (GPIO_PAR_ATA_BUFEN | GPIO_PAR_ATA_CS1 | GPIO_PAR_ATA_CS0 |
116 	     GPIO_PAR_ATA_DA2 | GPIO_PAR_ATA_DA1 | GPIO_PAR_ATA_DA0
117 	     | GPIO_PAR_ATA_RESET_RESET | GPIO_PAR_ATA_DMARQ_DMARQ |
118 	     GPIO_PAR_ATA_IORDY_IORDY);
119 	gpio->par_pci |=
120 	    (GPIO_PAR_PCI_GNT3_ATA_DMACK | GPIO_PAR_PCI_REQ3_ATA_INTRQ);
121 
122 	return (0);
123 }
124 
125 void ide_set_reset(int idereset)
126 {
127 	volatile atac_t *ata = (atac_t *) MMAP_ATA;
128 	long period;
129 	/*  t1,  t2,  t3,  t4,  t5,  t6,  t9, tRD,  tA */
130 	int piotms[5][9] = {
131 		{70, 165, 60, 30, 50, 5, 20, 0, 35},	/* PIO 0 */
132 		{50, 125, 45, 20, 35, 5, 15, 0, 35},	/* PIO 1 */
133 		{30, 100, 30, 15, 20, 5, 10, 0, 35},	/* PIO 2 */
134 		{30, 80, 30, 10, 20, 5, 10, 0, 35},	/* PIO 3 */
135 		{25, 70, 20, 10, 20, 5, 10, 0, 35}
136 	};			/* PIO 4 */
137 
138 	if (idereset) {
139 		ata->cr = 0;	/* control reset */
140 		udelay(10000);
141 	} else {
142 #define CALC_TIMING(t) (t + period - 1) / period
143 		period = 1000000000 / gd->bus_clk;	/* period in ns */
144 
145 		/*ata->ton = CALC_TIMING (180); */
146 		ata->t1 = CALC_TIMING(piotms[2][0]);
147 		ata->t2w = CALC_TIMING(piotms[2][1]);
148 		ata->t2r = CALC_TIMING(piotms[2][1]);
149 		ata->ta = CALC_TIMING(piotms[2][8]);
150 		ata->trd = CALC_TIMING(piotms[2][7]);
151 		ata->t4 = CALC_TIMING(piotms[2][3]);
152 		ata->t9 = CALC_TIMING(piotms[2][6]);
153 
154 		ata->cr = 0x40;	/* IORDY enable */
155 		udelay(200000);
156 		ata->cr |= 0x01;	/* IORDY enable */
157 	}
158 }
159 #endif
160 
161 #if defined(CONFIG_PCI)
162 /*
163  * Initialize PCI devices, report devices found.
164  */
165 static struct pci_controller hose;
166 extern void pci_mcf5445x_init(struct pci_controller *hose);
167 
168 void pci_init_board(void)
169 {
170 	pci_mcf5445x_init(&hose);
171 }
172 #endif				/* CONFIG_PCI */
173 
174 #if defined(CONFIG_FLASH_CFI_LEGACY)
175 #include <flash.h>
176 ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
177 {
178 	int sect[] = CONFIG_SYS_ATMEL_SECT;
179 	int sectsz[] = CONFIG_SYS_ATMEL_SECTSZ;
180 	int i, j, k;
181 
182 	if (base != CONFIG_SYS_ATMEL_BASE)
183 		return 0;
184 
185 	info->flash_id          = 0x01000000;
186 	info->portwidth         = 1;
187 	info->chipwidth         = 1;
188 	info->buffer_size       = 1;
189 	info->erase_blk_tout    = 16384;
190 	info->write_tout        = 2;
191 	info->buffer_write_tout = 5;
192 	info->vendor            = 0xFFF0; /* CFI_CMDSET_AMD_LEGACY */
193 	info->cmd_reset         = 0x00F0;
194 	info->interface         = FLASH_CFI_X8;
195 	info->legacy_unlock     = 0;
196 	info->manufacturer_id   = (u16) ATM_MANUFACT;
197 	info->device_id         = ATM_ID_LV040;
198 	info->device_id2        = 0;
199 
200 	info->ext_addr          = 0;
201 	info->cfi_version       = 0x3133;
202 	info->cfi_offset        = 0x0000;
203 	info->addr_unlock1      = 0x00000555;
204 	info->addr_unlock2      = 0x000002AA;
205 	info->name              = "CFI conformant";
206 
207 	info->size              = 0;
208 	info->sector_count      = CONFIG_SYS_ATMEL_TOTALSECT;
209 	info->start[0] = base;
210 	for (k = 0, i = 0; i < CONFIG_SYS_ATMEL_REGION; i++) {
211 		info->size += sect[i] * sectsz[i];
212 
213 		for (j = 0; j < sect[i]; j++, k++) {
214 			info->start[k + 1] = info->start[k] + sectsz[i];
215 			info->protect[k] = 0;
216 		}
217 	}
218 
219 	return 1;
220 }
221 #endif				/* CONFIG_SYS_FLASH_CFI */
222