1 /* 2 * (C) Copyright 2000-2003 3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4 * 5 * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc. 6 * TsiChung Liew (Tsi-Chung.Liew@freescale.com) 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #include <config.h> 12 #include <common.h> 13 #include <asm/io.h> 14 #include <asm/immap.h> 15 16 DECLARE_GLOBAL_DATA_PTR; 17 18 #if defined(CONFIG_CMD_NAND) 19 #include <nand.h> 20 #include <linux/mtd/mtd.h> 21 22 #define SET_CLE 0x10 23 #define SET_ALE 0x08 24 25 static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, unsigned int ctrl) 26 { 27 struct nand_chip *this = mtdinfo->priv; 28 volatile u16 *nCE = (u16 *) CONFIG_SYS_LATCH_ADDR; 29 30 if (ctrl & NAND_CTRL_CHANGE) { 31 ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; 32 33 IO_ADDR_W &= ~(SET_ALE | SET_CLE); 34 35 if (ctrl & NAND_NCE) 36 *nCE &= 0xFFFB; 37 else 38 *nCE |= 0x0004; 39 40 if (ctrl & NAND_CLE) 41 IO_ADDR_W |= SET_CLE; 42 if (ctrl & NAND_ALE) 43 IO_ADDR_W |= SET_ALE; 44 45 this->IO_ADDR_W = (void *)IO_ADDR_W; 46 47 } 48 49 if (cmd != NAND_CMD_NONE) 50 writeb(cmd, this->IO_ADDR_W); 51 } 52 53 int board_nand_init(struct nand_chip *nand) 54 { 55 gpio_t *gpio = (gpio_t *) MMAP_GPIO; 56 fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; 57 58 clrbits_be32(&fbcs->csmr2, FBCS_CSMR_WP); 59 60 /* 61 * set up pin configuration - enabled 2nd output buffer's signals 62 * (nand_ngpio - nCE USB1/2_PWR_EN, LATCH_GPIOs, LCD_VEEEN, etc) 63 * to use nCE signal 64 */ 65 clrbits_8(&gpio->par_timer, GPIO_PAR_TIN3_TIN3); 66 setbits_8(&gpio->pddr_timer, 0x08); 67 setbits_8(&gpio->ppd_timer, 0x08); 68 out_8(&gpio->pclrr_timer, 0); 69 out_8(&gpio->podr_timer, 0); 70 71 nand->chip_delay = 60; 72 nand->ecc.mode = NAND_ECC_SOFT; 73 nand->cmd_ctrl = nand_hwcontrol; 74 75 return 0; 76 } 77 #endif 78