1 /*
2  * (C) Copyright 2000-2003
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  *
5  * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
6  * Hayden Fraser (Hayden.Fraser@freescale.com)
7  *
8  * SPDX-License-Identifier:	GPL-2.0+
9  */
10 
11 #include <common.h>
12 #include <asm/immap.h>
13 #include <netdev.h>
14 #include <asm/io.h>
15 
16 DECLARE_GLOBAL_DATA_PTR;
17 
18 int checkboard(void)
19 {
20 	puts("Board: ");
21 	puts("Freescale MCF5253 DEMO\n");
22 	return 0;
23 };
24 
25 int dram_init(void)
26 {
27 	u32 dramsize = 0;
28 
29 	/*
30 	 * Check to see if the SDRAM has already been initialized
31 	 * by a run control tool
32 	 */
33 	if (!(mbar_readLong(MCFSIM_DCR) & 0x8000)) {
34 		u32 RC, temp;
35 
36 		RC = (CONFIG_SYS_CLK / 1000000) >> 1;
37 		RC = (RC * 15) >> 4;
38 
39 		/* Initialize DRAM Control Register: DCR */
40 		mbar_writeShort(MCFSIM_DCR, (0x8400 | RC));
41 		__asm__("nop");
42 
43 		mbar_writeLong(MCFSIM_DACR0, 0x00003224);
44 		__asm__("nop");
45 
46 		/* Initialize DMR0 */
47 		dramsize = (CONFIG_SYS_SDRAM_SIZE << 20);
48 		temp = (dramsize - 1) & 0xFFFC0000;
49 		mbar_writeLong(MCFSIM_DMR0, temp | 1);
50 		__asm__("nop");
51 
52 		mbar_writeLong(MCFSIM_DACR0, 0x0000322c);
53 		mb();
54 		__asm__("nop");
55 
56 		/* Write to this block to initiate precharge */
57 		*(u32 *) (CONFIG_SYS_SDRAM_BASE) = 0xa5a5a5a5;
58 		mb();
59 		__asm__("nop");
60 
61 		/* Set RE bit in DACR */
62 		mbar_writeLong(MCFSIM_DACR0,
63 			       mbar_readLong(MCFSIM_DACR0) | 0x8000);
64 		__asm__("nop");
65 
66 		/* Wait for at least 8 auto refresh cycles to occur */
67 		udelay(500);
68 
69 		/* Finish the configuration by issuing the MRS */
70 		mbar_writeLong(MCFSIM_DACR0,
71 			       mbar_readLong(MCFSIM_DACR0) | 0x0040);
72 		__asm__("nop");
73 
74 		*(u32 *) (CONFIG_SYS_SDRAM_BASE + 0x800) = 0xa5a5a5a5;
75 		mb();
76 	}
77 
78 	gd->ram_size = dramsize;
79 
80 	return 0;
81 }
82 
83 int testdram(void)
84 {
85 	/* TODO: XXX XXX XXX */
86 	printf("DRAM test not implemented!\n");
87 
88 	return (0);
89 }
90 
91 #ifdef CONFIG_CMD_IDE
92 #include <ata.h>
93 int ide_preinit(void)
94 {
95 	return (0);
96 }
97 
98 void ide_set_reset(int idereset)
99 {
100 	atac_t *ata = (atac_t *) CONFIG_SYS_ATA_BASE_ADDR;
101 	long period;
102 	/*  t1,  t2,  t3,  t4,  t5,  t6,  t9, tRD,  tA */
103 	int piotms[5][9] = { {70, 165, 60, 30, 50, 5, 20, 0, 35},	/* PIO 0 */
104 	{50, 125, 45, 20, 35, 5, 15, 0, 35},	/* PIO 1 */
105 	{30, 100, 30, 15, 20, 5, 10, 0, 35},	/* PIO 2 */
106 	{30, 80, 30, 10, 20, 5, 10, 0, 35},	/* PIO 3 */
107 	{25, 70, 20, 10, 20, 5, 10, 0, 35}	/* PIO 4 */
108 	};
109 
110 	if (idereset) {
111 		/* control reset */
112 		out_8(&ata->cr, 0);
113 		udelay(100);
114 	} else {
115 		mbar2_writeLong(CIM_MISCCR, CIM_MISCCR_CPUEND);
116 
117 #define CALC_TIMING(t) (t + period - 1) / period
118 		period = 1000000000 / (CONFIG_SYS_CLK / 2);	/* period in ns */
119 
120 		/*ata->ton = CALC_TIMING (180); */
121 		out_8(&ata->t1, CALC_TIMING(piotms[2][0]));
122 		out_8(&ata->t2w, CALC_TIMING(piotms[2][1]));
123 		out_8(&ata->t2r, CALC_TIMING(piotms[2][1]));
124 		out_8(&ata->ta, CALC_TIMING(piotms[2][8]));
125 		out_8(&ata->trd, CALC_TIMING(piotms[2][7]));
126 		out_8(&ata->t4, CALC_TIMING(piotms[2][3]));
127 		out_8(&ata->t9, CALC_TIMING(piotms[2][6]));
128 
129 		/* IORDY enable */
130 		out_8(&ata->cr, 0x40);
131 		udelay(2000);
132 		/* IORDY enable */
133 		setbits_8(&ata->cr, 0x01);
134 	}
135 }
136 #endif				/* CONFIG_CMD_IDE */
137 
138 
139 #ifdef CONFIG_DRIVER_DM9000
140 int board_eth_init(bd_t *bis)
141 {
142 	return dm9000_initialize(bis);
143 }
144 #endif
145