1 /*
2  * (C) Copyright 2000-2003
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  *
5  * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
6  * Hayden Fraser (Hayden.Fraser@freescale.com)
7  *
8  * See file CREDITS for list of people who contributed to this
9  * project.
10  *
11  * This program is free software; you can redistribute it and/or
12  * modify it under the terms of the GNU General Public License as
13  * published by the Free Software Foundation; either version 2 of
14  * the License, or (at your option) any later version.
15  *
16  * This program is distributed in the hope that it will be useful,
17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19  * GNU General Public License for more details.
20  *
21  * You should have received a copy of the GNU General Public License
22  * along with this program; if not, write to the Free Software
23  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
24  * MA 02111-1307 USA
25  */
26 
27 #include <common.h>
28 #include <asm/immap.h>
29 #include <netdev.h>
30 #include <asm/io.h>
31 
32 int checkboard(void)
33 {
34 	puts("Board: ");
35 	puts("Freescale MCF5253 DEMO\n");
36 	return 0;
37 };
38 
39 phys_size_t initdram(int board_type)
40 {
41 	u32 dramsize = 0;
42 
43 	/*
44 	 * Check to see if the SDRAM has already been initialized
45 	 * by a run control tool
46 	 */
47 	if (!(mbar_readLong(MCFSIM_DCR) & 0x8000)) {
48 		u32 RC, temp;
49 
50 		RC = (CONFIG_SYS_CLK / 1000000) >> 1;
51 		RC = (RC * 15) >> 4;
52 
53 		/* Initialize DRAM Control Register: DCR */
54 		mbar_writeShort(MCFSIM_DCR, (0x8400 | RC));
55 		__asm__("nop");
56 
57 		mbar_writeLong(MCFSIM_DACR0, 0x00003224);
58 		__asm__("nop");
59 
60 		/* Initialize DMR0 */
61 		dramsize = (CONFIG_SYS_SDRAM_SIZE << 20);
62 		temp = (dramsize - 1) & 0xFFFC0000;
63 		mbar_writeLong(MCFSIM_DMR0, temp | 1);
64 		__asm__("nop");
65 
66 		mbar_writeLong(MCFSIM_DACR0, 0x0000322c);
67 		mb();
68 		__asm__("nop");
69 
70 		/* Write to this block to initiate precharge */
71 		*(u32 *) (CONFIG_SYS_SDRAM_BASE) = 0xa5a5a5a5;
72 		mb();
73 		__asm__("nop");
74 
75 		/* Set RE bit in DACR */
76 		mbar_writeLong(MCFSIM_DACR0,
77 			       mbar_readLong(MCFSIM_DACR0) | 0x8000);
78 		__asm__("nop");
79 
80 		/* Wait for at least 8 auto refresh cycles to occur */
81 		udelay(500);
82 
83 		/* Finish the configuration by issuing the MRS */
84 		mbar_writeLong(MCFSIM_DACR0,
85 			       mbar_readLong(MCFSIM_DACR0) | 0x0040);
86 		__asm__("nop");
87 
88 		*(u32 *) (CONFIG_SYS_SDRAM_BASE + 0x800) = 0xa5a5a5a5;
89 		mb();
90 	}
91 
92 	return dramsize;
93 }
94 
95 int testdram(void)
96 {
97 	/* TODO: XXX XXX XXX */
98 	printf("DRAM test not implemented!\n");
99 
100 	return (0);
101 }
102 
103 #ifdef CONFIG_CMD_IDE
104 #include <ata.h>
105 int ide_preinit(void)
106 {
107 	return (0);
108 }
109 
110 void ide_set_reset(int idereset)
111 {
112 	volatile atac_t *ata = (atac_t *) CONFIG_SYS_ATA_BASE_ADDR;
113 	long period;
114 	/*  t1,  t2,  t3,  t4,  t5,  t6,  t9, tRD,  tA */
115 	int piotms[5][9] = { {70, 165, 60, 30, 50, 5, 20, 0, 35},	/* PIO 0 */
116 	{50, 125, 45, 20, 35, 5, 15, 0, 35},	/* PIO 1 */
117 	{30, 100, 30, 15, 20, 5, 10, 0, 35},	/* PIO 2 */
118 	{30, 80, 30, 10, 20, 5, 10, 0, 35},	/* PIO 3 */
119 	{25, 70, 20, 10, 20, 5, 10, 0, 35}	/* PIO 4 */
120 	};
121 
122 	if (idereset) {
123 		ata->cr = 0;	/* control reset */
124 		udelay(100);
125 	} else {
126 		mbar2_writeLong(CIM_MISCCR, CIM_MISCCR_CPUEND);
127 
128 #define CALC_TIMING(t) (t + period - 1) / period
129 		period = 1000000000 / (CONFIG_SYS_CLK / 2);	/* period in ns */
130 
131 		/*ata->ton = CALC_TIMING (180); */
132 		ata->t1 = CALC_TIMING(piotms[2][0]);
133 		ata->t2w = CALC_TIMING(piotms[2][1]);
134 		ata->t2r = CALC_TIMING(piotms[2][1]);
135 		ata->ta = CALC_TIMING(piotms[2][8]);
136 		ata->trd = CALC_TIMING(piotms[2][7]);
137 		ata->t4 = CALC_TIMING(piotms[2][3]);
138 		ata->t9 = CALC_TIMING(piotms[2][6]);
139 
140 		ata->cr = 0x40;	/* IORDY enable */
141 		udelay(2000);
142 		ata->cr |= 0x01;	/* IORDY enable */
143 	}
144 }
145 #endif				/* CONFIG_CMD_IDE */
146 
147 
148 #ifdef CONFIG_DRIVER_DM9000
149 int board_eth_init(bd_t *bis)
150 {
151 	return dm9000_initialize(bis);
152 }
153 #endif
154