1 /* 2 * (C) Copyright 2000-2003 3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4 * 5 * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc. 6 * TsiChung Liew (Tsi-Chung.Liew@freescale.com) 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #include <common.h> 12 #include <asm/immap.h> 13 #include <asm/io.h> 14 15 DECLARE_GLOBAL_DATA_PTR; 16 17 int checkboard(void) 18 { 19 puts("Board: "); 20 puts("Freescale M52277 EVB\n"); 21 return 0; 22 }; 23 24 phys_size_t initdram(int board_type) 25 { 26 u32 dramsize; 27 28 #ifdef CONFIG_CF_SBF 29 /* 30 * Serial Boot: The dram is already initialized in start.S 31 * only require to return DRAM size 32 */ 33 dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; 34 #else 35 sdramc_t *sdram = (sdramc_t *)(MMAP_SDRAM); 36 gpio_t *gpio = (gpio_t *)(MMAP_GPIO); 37 u32 i; 38 39 dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; 40 41 for (i = 0x13; i < 0x20; i++) { 42 if (dramsize == (1 << i)) 43 break; 44 } 45 i--; 46 47 out_8(&gpio->mscr_sdram, CONFIG_SYS_SDRAM_DRV_STRENGTH); 48 49 out_be32(&sdram->sdcs0, CONFIG_SYS_SDRAM_BASE | i); 50 51 out_be32(&sdram->sdcfg1, CONFIG_SYS_SDRAM_CFG1); 52 out_be32(&sdram->sdcfg2, CONFIG_SYS_SDRAM_CFG2); 53 54 /* Issue PALL */ 55 out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 2); 56 __asm__("nop"); 57 58 /* Issue LEMR */ 59 out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_MODE); 60 __asm__("nop"); 61 out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_EMOD); 62 __asm__("nop"); 63 64 udelay(1000); 65 66 /* Issue PALL */ 67 out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 2); 68 __asm__("nop"); 69 70 /* Perform two refresh cycles */ 71 out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4); 72 __asm__("nop"); 73 out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4); 74 __asm__("nop"); 75 76 out_be32(&sdram->sdcr, 77 (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00); 78 79 udelay(100); 80 #endif 81 return (dramsize); 82 }; 83 84 int testdram(void) 85 { 86 /* TODO: XXX XXX XXX */ 87 printf("DRAM test not implemented!\n"); 88 89 return (0); 90 } 91