1 /* 2 * Copyright 2015 Freescale Semiconductor, Inc. 3 * 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #include <common.h> 9 #include <command.h> 10 #include <netdev.h> 11 #include <malloc.h> 12 #include <fsl_mdio.h> 13 #include <miiphy.h> 14 #include <phy.h> 15 #include <fm_eth.h> 16 #include <asm/io.h> 17 #include <exports.h> 18 #include <asm/arch/fsl_serdes.h> 19 #include <fsl-mc/ldpaa_wriop.h> 20 21 DECLARE_GLOBAL_DATA_PTR; 22 23 #define MC_BOOT_ENV_VAR "mcinitcmd" 24 int board_eth_init(bd_t *bis) 25 { 26 #if defined(CONFIG_FSL_MC_ENET) 27 char *mc_boot_env_var; 28 int i, interface; 29 struct memac_mdio_info mdio_info; 30 struct mii_dev *dev; 31 struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); 32 u32 srds_s1; 33 struct memac_mdio_controller *reg; 34 35 srds_s1 = in_le32(&gur->rcwsr[28]) & 36 FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK; 37 srds_s1 >>= FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT; 38 39 reg = (struct memac_mdio_controller *)CONFIG_SYS_FSL_WRIOP1_MDIO1; 40 mdio_info.regs = reg; 41 mdio_info.name = DEFAULT_WRIOP_MDIO1_NAME; 42 43 /* Register the EMI 1 */ 44 fm_memac_mdio_init(bis, &mdio_info); 45 46 reg = (struct memac_mdio_controller *)CONFIG_SYS_FSL_WRIOP1_MDIO2; 47 mdio_info.regs = reg; 48 mdio_info.name = DEFAULT_WRIOP_MDIO2_NAME; 49 50 /* Register the EMI 2 */ 51 fm_memac_mdio_init(bis, &mdio_info); 52 53 switch (srds_s1) { 54 case 0x2A: 55 wriop_set_phy_address(WRIOP1_DPMAC1, CORTINA_PHY_ADDR1); 56 wriop_set_phy_address(WRIOP1_DPMAC2, CORTINA_PHY_ADDR2); 57 wriop_set_phy_address(WRIOP1_DPMAC3, CORTINA_PHY_ADDR3); 58 wriop_set_phy_address(WRIOP1_DPMAC4, CORTINA_PHY_ADDR4); 59 wriop_set_phy_address(WRIOP1_DPMAC5, AQ_PHY_ADDR1); 60 wriop_set_phy_address(WRIOP1_DPMAC6, AQ_PHY_ADDR2); 61 wriop_set_phy_address(WRIOP1_DPMAC7, AQ_PHY_ADDR3); 62 wriop_set_phy_address(WRIOP1_DPMAC8, AQ_PHY_ADDR4); 63 64 break; 65 default: 66 printf("SerDes1 protocol 0x%x is not supported on LS2080aRDB\n", 67 srds_s1); 68 break; 69 } 70 71 for (i = WRIOP1_DPMAC1; i <= WRIOP1_DPMAC4; i++) { 72 interface = wriop_get_enet_if(i); 73 switch (interface) { 74 case PHY_INTERFACE_MODE_XGMII: 75 dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO1_NAME); 76 wriop_set_mdio(i, dev); 77 break; 78 default: 79 break; 80 } 81 } 82 83 for (i = WRIOP1_DPMAC5; i <= WRIOP1_DPMAC8; i++) { 84 switch (wriop_get_enet_if(i)) { 85 case PHY_INTERFACE_MODE_XGMII: 86 dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO2_NAME); 87 wriop_set_mdio(i, dev); 88 break; 89 default: 90 break; 91 } 92 } 93 94 mc_boot_env_var = getenv(MC_BOOT_ENV_VAR); 95 if (mc_boot_env_var) 96 run_command_list(mc_boot_env_var, -1, 0); 97 cpu_eth_init(bis); 98 #endif /* CONFIG_FMAN_ENET */ 99 100 #ifdef CONFIG_PHY_AQUANTIA 101 /* 102 * Export functions to be used by AQ firmware 103 * upload application 104 */ 105 gd->jt->strcpy = strcpy; 106 gd->jt->mdelay = mdelay; 107 gd->jt->mdio_get_current_dev = mdio_get_current_dev; 108 gd->jt->phy_find_by_mask = phy_find_by_mask; 109 gd->jt->mdio_phydev_for_ethname = mdio_phydev_for_ethname; 110 gd->jt->miiphy_set_current_dev = miiphy_set_current_dev; 111 #endif 112 return pci_eth_init(bis); 113 } 114