1 /*
2  * Copyright 2015 Freescale Semiconductor
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 #include <common.h>
7 #include <malloc.h>
8 #include <errno.h>
9 #include <netdev.h>
10 #include <fsl_ifc.h>
11 #include <fsl_ddr.h>
12 #include <asm/io.h>
13 #include <fdt_support.h>
14 #include <libfdt.h>
15 #include <fsl-mc/fsl_mc.h>
16 #include <environment.h>
17 #include <i2c.h>
18 #include <rtc.h>
19 #include <asm/arch/soc.h>
20 #include <hwconfig.h>
21 #include <fsl_sec.h>
22 #include <asm/arch/ppa.h>
23 
24 
25 #include "../common/qixis.h"
26 #include "ls2080aqds_qixis.h"
27 #include "../common/vid.h"
28 
29 #define PIN_MUX_SEL_SDHC	0x00
30 #define PIN_MUX_SEL_DSPI	0x0a
31 #define SCFG_QSPICLKCTRL_DIV_20	(5 << 27)
32 
33 #define SET_SDHC_MUX_SEL(reg, value)	((reg & 0xf0) | value)
34 
35 DECLARE_GLOBAL_DATA_PTR;
36 
37 enum {
38 	MUX_TYPE_SDHC,
39 	MUX_TYPE_DSPI,
40 };
41 
42 unsigned long long get_qixis_addr(void)
43 {
44 	unsigned long long addr;
45 
46 	if (gd->flags & GD_FLG_RELOC)
47 		addr = QIXIS_BASE_PHYS;
48 	else
49 		addr = QIXIS_BASE_PHYS_EARLY;
50 
51 	/*
52 	 * IFC address under 256MB is mapped to 0x30000000, any address above
53 	 * is mapped to 0x5_10000000 up to 4GB.
54 	 */
55 	addr = addr  > 0x10000000 ? addr + 0x500000000ULL : addr + 0x30000000;
56 
57 	return addr;
58 }
59 
60 int checkboard(void)
61 {
62 	char buf[64];
63 	u8 sw;
64 	static const char *const freq[] = {"100", "125", "156.25",
65 					    "100 separate SSCG"};
66 	int clock;
67 
68 	cpu_name(buf);
69 	printf("Board: %s-QDS, ", buf);
70 
71 	sw = QIXIS_READ(arch);
72 	printf("Board Arch: V%d, ", sw >> 4);
73 	printf("Board version: %c, boot from ", (sw & 0xf) + 'A' - 1);
74 
75 	memset((u8 *)buf, 0x00, ARRAY_SIZE(buf));
76 
77 	sw = QIXIS_READ(brdcfg[0]);
78 	sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
79 
80 	if (sw < 0x8)
81 		printf("vBank: %d\n", sw);
82 	else if (sw == 0x8)
83 		puts("PromJet\n");
84 	else if (sw == 0x9)
85 		puts("NAND\n");
86 	else if (sw == 0xf)
87 		puts("QSPI\n");
88 	else if (sw == 0x15)
89 		printf("IFCCard\n");
90 	else
91 		printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
92 
93 	printf("FPGA: v%d (%s), build %d",
94 	       (int)QIXIS_READ(scver), qixis_read_tag(buf),
95 	       (int)qixis_read_minor());
96 	/* the timestamp string contains "\n" at the end */
97 	printf(" on %s", qixis_read_time(buf));
98 
99 	/*
100 	 * Display the actual SERDES reference clocks as configured by the
101 	 * dip switches on the board.  Note that the SWx registers could
102 	 * technically be set to force the reference clocks to match the
103 	 * values that the SERDES expects (or vice versa).  For now, however,
104 	 * we just display both values and hope the user notices when they
105 	 * don't match.
106 	 */
107 	puts("SERDES1 Reference : ");
108 	sw = QIXIS_READ(brdcfg[2]);
109 	clock = (sw >> 6) & 3;
110 	printf("Clock1 = %sMHz ", freq[clock]);
111 	clock = (sw >> 4) & 3;
112 	printf("Clock2 = %sMHz", freq[clock]);
113 
114 	puts("\nSERDES2 Reference : ");
115 	clock = (sw >> 2) & 3;
116 	printf("Clock1 = %sMHz ", freq[clock]);
117 	clock = (sw >> 0) & 3;
118 	printf("Clock2 = %sMHz\n", freq[clock]);
119 
120 	return 0;
121 }
122 
123 unsigned long get_board_sys_clk(void)
124 {
125 	u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
126 
127 	switch (sysclk_conf & 0x0F) {
128 	case QIXIS_SYSCLK_83:
129 		return 83333333;
130 	case QIXIS_SYSCLK_100:
131 		return 100000000;
132 	case QIXIS_SYSCLK_125:
133 		return 125000000;
134 	case QIXIS_SYSCLK_133:
135 		return 133333333;
136 	case QIXIS_SYSCLK_150:
137 		return 150000000;
138 	case QIXIS_SYSCLK_160:
139 		return 160000000;
140 	case QIXIS_SYSCLK_166:
141 		return 166666666;
142 	}
143 	return 66666666;
144 }
145 
146 unsigned long get_board_ddr_clk(void)
147 {
148 	u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
149 
150 	switch ((ddrclk_conf & 0x30) >> 4) {
151 	case QIXIS_DDRCLK_100:
152 		return 100000000;
153 	case QIXIS_DDRCLK_125:
154 		return 125000000;
155 	case QIXIS_DDRCLK_133:
156 		return 133333333;
157 	}
158 	return 66666666;
159 }
160 
161 int select_i2c_ch_pca9547(u8 ch)
162 {
163 	int ret;
164 
165 	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
166 	if (ret) {
167 		puts("PCA: failed to select proper channel\n");
168 		return ret;
169 	}
170 
171 	return 0;
172 }
173 
174 int config_board_mux(int ctrl_type)
175 {
176 	u8 reg5;
177 
178 	reg5 = QIXIS_READ(brdcfg[5]);
179 
180 	switch (ctrl_type) {
181 	case MUX_TYPE_SDHC:
182 		reg5 = SET_SDHC_MUX_SEL(reg5, PIN_MUX_SEL_SDHC);
183 		break;
184 	case MUX_TYPE_DSPI:
185 		reg5 = SET_SDHC_MUX_SEL(reg5, PIN_MUX_SEL_DSPI);
186 		break;
187 	default:
188 		printf("Wrong mux interface type\n");
189 		return -1;
190 	}
191 
192 	QIXIS_WRITE(brdcfg[5], reg5);
193 
194 	return 0;
195 }
196 
197 int board_init(void)
198 {
199 	char *env_hwconfig;
200 	u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE;
201 	u32 val;
202 
203 	init_final_memctl_regs();
204 
205 	val = in_le32(dcfg_ccsr + DCFG_RCWSR13 / 4);
206 
207 	env_hwconfig = env_get("hwconfig");
208 
209 	if (hwconfig_f("dspi", env_hwconfig) &&
210 	    DCFG_RCWSR13_DSPI == (val & (u32)(0xf << 8)))
211 		config_board_mux(MUX_TYPE_DSPI);
212 	else
213 		config_board_mux(MUX_TYPE_SDHC);
214 
215 #if defined(CONFIG_NAND) && defined(CONFIG_FSL_QSPI)
216 	val = in_le32(dcfg_ccsr + DCFG_RCWSR15 / 4);
217 
218 	if (DCFG_RCWSR15_IFCGRPABASE_QSPI == (val & (u32)0x3))
219 		QIXIS_WRITE(brdcfg[9],
220 			    (QIXIS_READ(brdcfg[9]) & 0xf8) |
221 			     FSL_QIXIS_BRDCFG9_QSPI);
222 #endif
223 
224 #ifdef CONFIG_ENV_IS_NOWHERE
225 	gd->env_addr = (ulong)&default_environment[0];
226 #endif
227 	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
228 	rtc_enable_32khz_output();
229 #ifdef CONFIG_FSL_CAAM
230 	sec_init();
231 #endif
232 
233 #ifdef CONFIG_FSL_LS_PPA
234 	ppa_init();
235 #endif
236 
237 	return 0;
238 }
239 
240 int board_early_init_f(void)
241 {
242 #ifdef CONFIG_SYS_I2C_EARLY_INIT
243 	i2c_early_init_f();
244 #endif
245 	fsl_lsch3_early_init_f();
246 #ifdef CONFIG_FSL_QSPI
247 	/* input clk: 1/2 platform clk, output: input/20 */
248 	out_le32(SCFG_BASE + SCFG_QSPICLKCTLR, SCFG_QSPICLKCTRL_DIV_20);
249 #endif
250 	return 0;
251 }
252 
253 int misc_init_r(void)
254 {
255 	if (adjust_vdd(0))
256 		printf("Warning: Adjusting core voltage failed.\n");
257 
258 	return 0;
259 }
260 
261 void detail_board_ddr_info(void)
262 {
263 	puts("\nDDR    ");
264 	print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, "");
265 	print_ddr_info(0);
266 #ifdef CONFIG_SYS_FSL_HAS_DP_DDR
267 	if (soc_has_dp_ddr() && gd->bd->bi_dram[2].size) {
268 		puts("\nDP-DDR ");
269 		print_size(gd->bd->bi_dram[2].size, "");
270 		print_ddr_info(CONFIG_DP_DDR_CTRL);
271 	}
272 #endif
273 }
274 
275 #if defined(CONFIG_ARCH_MISC_INIT)
276 int arch_misc_init(void)
277 {
278 	return 0;
279 }
280 #endif
281 
282 #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
283 void fdt_fixup_board_enet(void *fdt)
284 {
285 	int offset;
286 
287 	offset = fdt_path_offset(fdt, "/soc/fsl-mc");
288 
289 	if (offset < 0)
290 		offset = fdt_path_offset(fdt, "/fsl-mc");
291 
292 	if (offset < 0) {
293 		printf("%s: ERROR: fsl-mc node not found in device tree (error %d)\n",
294 		       __func__, offset);
295 		return;
296 	}
297 
298 	if (get_mc_boot_status() == 0)
299 		fdt_status_okay(fdt, offset);
300 	else
301 		fdt_status_fail(fdt, offset);
302 }
303 
304 void board_quiesce_devices(void)
305 {
306 	fsl_mc_ldpaa_exit(gd->bd);
307 }
308 #endif
309 
310 #ifdef CONFIG_OF_BOARD_SETUP
311 int ft_board_setup(void *blob, bd_t *bd)
312 {
313 	u64 base[CONFIG_NR_DRAM_BANKS];
314 	u64 size[CONFIG_NR_DRAM_BANKS];
315 
316 	ft_cpu_setup(blob, bd);
317 
318 	/* fixup DT for the two GPP DDR banks */
319 	base[0] = gd->bd->bi_dram[0].start;
320 	size[0] = gd->bd->bi_dram[0].size;
321 	base[1] = gd->bd->bi_dram[1].start;
322 	size[1] = gd->bd->bi_dram[1].size;
323 
324 #ifdef CONFIG_RESV_RAM
325 	/* reduce size if reserved memory is within this bank */
326 	if (gd->arch.resv_ram >= base[0] &&
327 	    gd->arch.resv_ram < base[0] + size[0])
328 		size[0] = gd->arch.resv_ram - base[0];
329 	else if (gd->arch.resv_ram >= base[1] &&
330 		 gd->arch.resv_ram < base[1] + size[1])
331 		size[1] = gd->arch.resv_ram - base[1];
332 #endif
333 
334 	fdt_fixup_memory_banks(blob, base, size, 2);
335 
336 	fsl_fdt_fixup_dr_usb(blob, bd);
337 
338 #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
339 	fdt_fixup_board_enet(blob);
340 #endif
341 
342 	return 0;
343 }
344 #endif
345 
346 void qixis_dump_switch(void)
347 {
348 	int i, nr_of_cfgsw;
349 
350 	QIXIS_WRITE(cms[0], 0x00);
351 	nr_of_cfgsw = QIXIS_READ(cms[1]);
352 
353 	puts("DIP switch settings dump:\n");
354 	for (i = 1; i <= nr_of_cfgsw; i++) {
355 		QIXIS_WRITE(cms[0], i);
356 		printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1]));
357 	}
358 }
359