1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright 2015 Freescale Semiconductor
4  */
5 #include <common.h>
6 #include <malloc.h>
7 #include <errno.h>
8 #include <netdev.h>
9 #include <fsl_ifc.h>
10 #include <fsl_ddr.h>
11 #include <asm/io.h>
12 #include <fdt_support.h>
13 #include <linux/libfdt.h>
14 #include <fsl-mc/fsl_mc.h>
15 #include <environment.h>
16 #include <i2c.h>
17 #include <rtc.h>
18 #include <asm/arch/soc.h>
19 #include <hwconfig.h>
20 #include <fsl_sec.h>
21 #include <asm/arch/ppa.h>
22 
23 
24 #include "../common/qixis.h"
25 #include "ls2080aqds_qixis.h"
26 #include "../common/vid.h"
27 
28 #define PIN_MUX_SEL_SDHC	0x00
29 #define PIN_MUX_SEL_DSPI	0x0a
30 #define SCFG_QSPICLKCTRL_DIV_20	(5 << 27)
31 
32 #define SET_SDHC_MUX_SEL(reg, value)	((reg & 0xf0) | value)
33 
34 DECLARE_GLOBAL_DATA_PTR;
35 
36 enum {
37 	MUX_TYPE_SDHC,
38 	MUX_TYPE_DSPI,
39 };
40 
41 unsigned long long get_qixis_addr(void)
42 {
43 	unsigned long long addr;
44 
45 	if (gd->flags & GD_FLG_RELOC)
46 		addr = QIXIS_BASE_PHYS;
47 	else
48 		addr = QIXIS_BASE_PHYS_EARLY;
49 
50 	/*
51 	 * IFC address under 256MB is mapped to 0x30000000, any address above
52 	 * is mapped to 0x5_10000000 up to 4GB.
53 	 */
54 	addr = addr  > 0x10000000 ? addr + 0x500000000ULL : addr + 0x30000000;
55 
56 	return addr;
57 }
58 
59 int checkboard(void)
60 {
61 	char buf[64];
62 	u8 sw;
63 	static const char *const freq[] = {"100", "125", "156.25",
64 					    "100 separate SSCG"};
65 	int clock;
66 
67 	cpu_name(buf);
68 	printf("Board: %s-QDS, ", buf);
69 
70 	sw = QIXIS_READ(arch);
71 	printf("Board Arch: V%d, ", sw >> 4);
72 	printf("Board version: %c, boot from ", (sw & 0xf) + 'A' - 1);
73 
74 	memset((u8 *)buf, 0x00, ARRAY_SIZE(buf));
75 
76 	sw = QIXIS_READ(brdcfg[0]);
77 	sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
78 
79 	if (sw < 0x8)
80 		printf("vBank: %d\n", sw);
81 	else if (sw == 0x8)
82 		puts("PromJet\n");
83 	else if (sw == 0x9)
84 		puts("NAND\n");
85 	else if (sw == 0xf)
86 		puts("QSPI\n");
87 	else if (sw == 0x15)
88 		printf("IFCCard\n");
89 	else
90 		printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
91 
92 	printf("FPGA: v%d (%s), build %d",
93 	       (int)QIXIS_READ(scver), qixis_read_tag(buf),
94 	       (int)qixis_read_minor());
95 	/* the timestamp string contains "\n" at the end */
96 	printf(" on %s", qixis_read_time(buf));
97 
98 	/*
99 	 * Display the actual SERDES reference clocks as configured by the
100 	 * dip switches on the board.  Note that the SWx registers could
101 	 * technically be set to force the reference clocks to match the
102 	 * values that the SERDES expects (or vice versa).  For now, however,
103 	 * we just display both values and hope the user notices when they
104 	 * don't match.
105 	 */
106 	puts("SERDES1 Reference : ");
107 	sw = QIXIS_READ(brdcfg[2]);
108 	clock = (sw >> 6) & 3;
109 	printf("Clock1 = %sMHz ", freq[clock]);
110 	clock = (sw >> 4) & 3;
111 	printf("Clock2 = %sMHz", freq[clock]);
112 
113 	puts("\nSERDES2 Reference : ");
114 	clock = (sw >> 2) & 3;
115 	printf("Clock1 = %sMHz ", freq[clock]);
116 	clock = (sw >> 0) & 3;
117 	printf("Clock2 = %sMHz\n", freq[clock]);
118 
119 	return 0;
120 }
121 
122 unsigned long get_board_sys_clk(void)
123 {
124 	u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
125 
126 	switch (sysclk_conf & 0x0F) {
127 	case QIXIS_SYSCLK_83:
128 		return 83333333;
129 	case QIXIS_SYSCLK_100:
130 		return 100000000;
131 	case QIXIS_SYSCLK_125:
132 		return 125000000;
133 	case QIXIS_SYSCLK_133:
134 		return 133333333;
135 	case QIXIS_SYSCLK_150:
136 		return 150000000;
137 	case QIXIS_SYSCLK_160:
138 		return 160000000;
139 	case QIXIS_SYSCLK_166:
140 		return 166666666;
141 	}
142 	return 66666666;
143 }
144 
145 unsigned long get_board_ddr_clk(void)
146 {
147 	u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
148 
149 	switch ((ddrclk_conf & 0x30) >> 4) {
150 	case QIXIS_DDRCLK_100:
151 		return 100000000;
152 	case QIXIS_DDRCLK_125:
153 		return 125000000;
154 	case QIXIS_DDRCLK_133:
155 		return 133333333;
156 	}
157 	return 66666666;
158 }
159 
160 int select_i2c_ch_pca9547(u8 ch)
161 {
162 	int ret;
163 
164 	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
165 	if (ret) {
166 		puts("PCA: failed to select proper channel\n");
167 		return ret;
168 	}
169 
170 	return 0;
171 }
172 
173 int config_board_mux(int ctrl_type)
174 {
175 	u8 reg5;
176 
177 	reg5 = QIXIS_READ(brdcfg[5]);
178 
179 	switch (ctrl_type) {
180 	case MUX_TYPE_SDHC:
181 		reg5 = SET_SDHC_MUX_SEL(reg5, PIN_MUX_SEL_SDHC);
182 		break;
183 	case MUX_TYPE_DSPI:
184 		reg5 = SET_SDHC_MUX_SEL(reg5, PIN_MUX_SEL_DSPI);
185 		break;
186 	default:
187 		printf("Wrong mux interface type\n");
188 		return -1;
189 	}
190 
191 	QIXIS_WRITE(brdcfg[5], reg5);
192 
193 	return 0;
194 }
195 
196 int board_init(void)
197 {
198 	char *env_hwconfig;
199 	u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE;
200 	u32 val;
201 
202 	init_final_memctl_regs();
203 
204 	val = in_le32(dcfg_ccsr + DCFG_RCWSR13 / 4);
205 
206 	env_hwconfig = env_get("hwconfig");
207 
208 	if (hwconfig_f("dspi", env_hwconfig) &&
209 	    DCFG_RCWSR13_DSPI == (val & (u32)(0xf << 8)))
210 		config_board_mux(MUX_TYPE_DSPI);
211 	else
212 		config_board_mux(MUX_TYPE_SDHC);
213 
214 #if defined(CONFIG_NAND) && defined(CONFIG_FSL_QSPI)
215 	val = in_le32(dcfg_ccsr + DCFG_RCWSR15 / 4);
216 
217 	if (DCFG_RCWSR15_IFCGRPABASE_QSPI == (val & (u32)0x3))
218 		QIXIS_WRITE(brdcfg[9],
219 			    (QIXIS_READ(brdcfg[9]) & 0xf8) |
220 			     FSL_QIXIS_BRDCFG9_QSPI);
221 #endif
222 
223 #ifdef CONFIG_ENV_IS_NOWHERE
224 	gd->env_addr = (ulong)&default_environment[0];
225 #endif
226 	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
227 	rtc_enable_32khz_output();
228 #ifdef CONFIG_FSL_CAAM
229 	sec_init();
230 #endif
231 
232 #ifdef CONFIG_FSL_LS_PPA
233 	ppa_init();
234 #endif
235 
236 	return 0;
237 }
238 
239 int board_early_init_f(void)
240 {
241 #ifdef CONFIG_SYS_I2C_EARLY_INIT
242 	i2c_early_init_f();
243 #endif
244 	fsl_lsch3_early_init_f();
245 #ifdef CONFIG_FSL_QSPI
246 	/* input clk: 1/2 platform clk, output: input/20 */
247 	out_le32(SCFG_BASE + SCFG_QSPICLKCTLR, SCFG_QSPICLKCTRL_DIV_20);
248 #endif
249 	return 0;
250 }
251 
252 int misc_init_r(void)
253 {
254 	if (adjust_vdd(0))
255 		printf("Warning: Adjusting core voltage failed.\n");
256 
257 	return 0;
258 }
259 
260 void detail_board_ddr_info(void)
261 {
262 	puts("\nDDR    ");
263 	print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, "");
264 	print_ddr_info(0);
265 #ifdef CONFIG_SYS_FSL_HAS_DP_DDR
266 	if (soc_has_dp_ddr() && gd->bd->bi_dram[2].size) {
267 		puts("\nDP-DDR ");
268 		print_size(gd->bd->bi_dram[2].size, "");
269 		print_ddr_info(CONFIG_DP_DDR_CTRL);
270 	}
271 #endif
272 }
273 
274 #if defined(CONFIG_ARCH_MISC_INIT)
275 int arch_misc_init(void)
276 {
277 	return 0;
278 }
279 #endif
280 
281 #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
282 void fdt_fixup_board_enet(void *fdt)
283 {
284 	int offset;
285 
286 	offset = fdt_path_offset(fdt, "/soc/fsl-mc");
287 
288 	if (offset < 0)
289 		offset = fdt_path_offset(fdt, "/fsl-mc");
290 
291 	if (offset < 0) {
292 		printf("%s: ERROR: fsl-mc node not found in device tree (error %d)\n",
293 		       __func__, offset);
294 		return;
295 	}
296 
297 	if ((get_mc_boot_status() == 0) && (get_dpl_apply_status() == 0))
298 		fdt_status_okay(fdt, offset);
299 	else
300 		fdt_status_fail(fdt, offset);
301 }
302 
303 void board_quiesce_devices(void)
304 {
305 	fsl_mc_ldpaa_exit(gd->bd);
306 }
307 #endif
308 
309 #ifdef CONFIG_OF_BOARD_SETUP
310 int ft_board_setup(void *blob, bd_t *bd)
311 {
312 	u64 base[CONFIG_NR_DRAM_BANKS];
313 	u64 size[CONFIG_NR_DRAM_BANKS];
314 
315 	ft_cpu_setup(blob, bd);
316 
317 	/* fixup DT for the two GPP DDR banks */
318 	base[0] = gd->bd->bi_dram[0].start;
319 	size[0] = gd->bd->bi_dram[0].size;
320 	base[1] = gd->bd->bi_dram[1].start;
321 	size[1] = gd->bd->bi_dram[1].size;
322 
323 #ifdef CONFIG_RESV_RAM
324 	/* reduce size if reserved memory is within this bank */
325 	if (gd->arch.resv_ram >= base[0] &&
326 	    gd->arch.resv_ram < base[0] + size[0])
327 		size[0] = gd->arch.resv_ram - base[0];
328 	else if (gd->arch.resv_ram >= base[1] &&
329 		 gd->arch.resv_ram < base[1] + size[1])
330 		size[1] = gd->arch.resv_ram - base[1];
331 #endif
332 
333 	fdt_fixup_memory_banks(blob, base, size, 2);
334 
335 	fdt_fsl_mc_fixup_iommu_map_entry(blob);
336 
337 	fsl_fdt_fixup_dr_usb(blob, bd);
338 
339 #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
340 	fdt_fixup_board_enet(blob);
341 #endif
342 
343 	return 0;
344 }
345 #endif
346 
347 void qixis_dump_switch(void)
348 {
349 	int i, nr_of_cfgsw;
350 
351 	QIXIS_WRITE(cms[0], 0x00);
352 	nr_of_cfgsw = QIXIS_READ(cms[1]);
353 
354 	puts("DIP switch settings dump:\n");
355 	for (i = 1; i <= nr_of_cfgsw; i++) {
356 		QIXIS_WRITE(cms[0], i);
357 		printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1]));
358 	}
359 }
360