1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Copyright 2017 NXP 4 */ 5 6 #include <common.h> 7 #include <command.h> 8 #include <netdev.h> 9 #include <asm/io.h> 10 #include <asm/arch/fsl_serdes.h> 11 #include <hwconfig.h> 12 #include <fsl_mdio.h> 13 #include <malloc.h> 14 #include <phy.h> 15 #include <fm_eth.h> 16 #include <i2c.h> 17 #include <miiphy.h> 18 #include <fsl-mc/fsl_mc.h> 19 #include <fsl-mc/ldpaa_wriop.h> 20 21 #include "../common/qixis.h" 22 23 #include "ls1088a_qixis.h" 24 25 #ifdef CONFIG_FSL_MC_ENET 26 27 #define SFP_TX 0 28 29 /* - In LS1088A A there are only 16 SERDES lanes, spread across 2 SERDES banks. 30 * Bank 1 -> Lanes A, B, C, D, 31 * Bank 2 -> Lanes A,B, C, D, 32 */ 33 34 /* Mapping of 8 SERDES lanes to LS1088A QDS board slots. A value of '0' here 35 * means that the mapping must be determined dynamically, or that the lane 36 * maps to something other than a board slot. 37 */ 38 39 static u8 lane_to_slot_fsm1[] = { 40 0, 0, 0, 0, 0, 0, 0, 0 41 }; 42 43 /* On the Vitesse VSC8234XHG SGMII riser card there are 4 SGMII PHYs 44 * housed. 45 */ 46 47 static int xqsgii_riser_phy_addr[] = { 48 XQSGMII_CARD_PHY1_PORT0_ADDR, 49 XQSGMII_CARD_PHY2_PORT0_ADDR, 50 XQSGMII_CARD_PHY3_PORT0_ADDR, 51 XQSGMII_CARD_PHY4_PORT0_ADDR, 52 XQSGMII_CARD_PHY3_PORT2_ADDR, 53 XQSGMII_CARD_PHY1_PORT2_ADDR, 54 XQSGMII_CARD_PHY4_PORT2_ADDR, 55 XQSGMII_CARD_PHY2_PORT2_ADDR, 56 }; 57 58 static int sgmii_riser_phy_addr[] = { 59 SGMII_CARD_PORT1_PHY_ADDR, 60 SGMII_CARD_PORT2_PHY_ADDR, 61 SGMII_CARD_PORT3_PHY_ADDR, 62 SGMII_CARD_PORT4_PHY_ADDR, 63 }; 64 65 /* Slot2 does not have EMI connections */ 66 #define EMI_NONE 0xFF 67 #define EMI1_RGMII1 0 68 #define EMI1_RGMII2 1 69 #define EMI1_SLOT1 2 70 71 static const char * const mdio_names[] = { 72 "LS1088A_QDS_MDIO0", 73 "LS1088A_QDS_MDIO1", 74 "LS1088A_QDS_MDIO2", 75 DEFAULT_WRIOP_MDIO2_NAME, 76 }; 77 78 struct ls1088a_qds_mdio { 79 u8 muxval; 80 struct mii_dev *realbus; 81 }; 82 83 static void sgmii_configure_repeater(int dpmac) 84 { 85 struct mii_dev *bus; 86 uint8_t a = 0xf; 87 int i, j, ret; 88 unsigned short value; 89 const char *dev = "LS1088A_QDS_MDIO2"; 90 int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b}; 91 int i2c_phy_addr = 0; 92 int phy_addr = 0; 93 94 uint8_t ch_a_eq[] = {0x1, 0x2, 0x3, 0x7}; 95 uint8_t ch_a_ctl2[] = {0x81, 0x82, 0x83, 0x84}; 96 uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7}; 97 uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84}; 98 99 /* Set I2c to Slot 1 */ 100 i2c_write(0x77, 0, 0, &a, 1); 101 102 switch (dpmac) { 103 case 1: 104 i2c_phy_addr = i2c_addr[1]; 105 phy_addr = 4; 106 break; 107 case 2: 108 i2c_phy_addr = i2c_addr[0]; 109 phy_addr = 0; 110 break; 111 case 3: 112 i2c_phy_addr = i2c_addr[3]; 113 phy_addr = 0xc; 114 break; 115 case 7: 116 i2c_phy_addr = i2c_addr[2]; 117 phy_addr = 8; 118 break; 119 } 120 121 /* Check the PHY status */ 122 ret = miiphy_set_current_dev(dev); 123 if (ret > 0) 124 goto error; 125 126 bus = mdio_get_current_dev(); 127 debug("Reading from bus %s\n", bus->name); 128 129 ret = miiphy_write(dev, phy_addr, 0x1f, 3); 130 if (ret > 0) 131 goto error; 132 133 mdelay(10); 134 ret = miiphy_read(dev, phy_addr, 0x11, &value); 135 if (ret > 0) 136 goto error; 137 138 mdelay(10); 139 140 if ((value & 0xfff) == 0x401) { 141 miiphy_write(dev, phy_addr, 0x1f, 0); 142 printf("DPMAC %d:PHY is ..... Configured\n", dpmac); 143 return; 144 } 145 146 for (i = 0; i < 4; i++) { 147 for (j = 0; j < 4; j++) { 148 a = 0x18; 149 i2c_write(i2c_phy_addr, 6, 1, &a, 1); 150 a = 0x38; 151 i2c_write(i2c_phy_addr, 4, 1, &a, 1); 152 a = 0x4; 153 i2c_write(i2c_phy_addr, 8, 1, &a, 1); 154 155 i2c_write(i2c_phy_addr, 0xf, 1, 156 &ch_a_eq[i], 1); 157 i2c_write(i2c_phy_addr, 0x11, 1, 158 &ch_a_ctl2[j], 1); 159 160 i2c_write(i2c_phy_addr, 0x16, 1, 161 &ch_b_eq[i], 1); 162 i2c_write(i2c_phy_addr, 0x18, 1, 163 &ch_b_ctl2[j], 1); 164 165 a = 0x14; 166 i2c_write(i2c_phy_addr, 0x23, 1, &a, 1); 167 a = 0xb5; 168 i2c_write(i2c_phy_addr, 0x2d, 1, &a, 1); 169 a = 0x20; 170 i2c_write(i2c_phy_addr, 4, 1, &a, 1); 171 mdelay(100); 172 ret = miiphy_read(dev, phy_addr, 0x11, &value); 173 if (ret > 0) 174 goto error; 175 176 mdelay(100); 177 ret = miiphy_read(dev, phy_addr, 0x11, &value); 178 if (ret > 0) 179 goto error; 180 181 if ((value & 0xfff) == 0x401) { 182 printf("DPMAC %d :PHY is configured ", 183 dpmac); 184 printf("after setting repeater 0x%x\n", 185 value); 186 i = 5; 187 j = 5; 188 } else { 189 printf("DPMAC %d :PHY is failed to ", 190 dpmac); 191 printf("configure the repeater 0x%x\n", value); 192 } 193 } 194 } 195 miiphy_write(dev, phy_addr, 0x1f, 0); 196 error: 197 if (ret) 198 printf("DPMAC %d ..... FAILED to configure PHY\n", dpmac); 199 return; 200 } 201 202 static void qsgmii_configure_repeater(int dpmac) 203 { 204 uint8_t a = 0xf; 205 int i, j; 206 int i2c_phy_addr = 0; 207 int phy_addr = 0; 208 int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b}; 209 210 uint8_t ch_a_eq[] = {0x1, 0x2, 0x3, 0x7}; 211 uint8_t ch_a_ctl2[] = {0x81, 0x82, 0x83, 0x84}; 212 uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7}; 213 uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84}; 214 215 const char *dev = mdio_names[EMI1_SLOT1]; 216 int ret = 0; 217 unsigned short value; 218 219 /* Set I2c to Slot 1 */ 220 i2c_write(0x77, 0, 0, &a, 1); 221 222 switch (dpmac) { 223 case 7: 224 case 8: 225 case 9: 226 case 10: 227 i2c_phy_addr = i2c_addr[2]; 228 phy_addr = 8; 229 break; 230 231 case 3: 232 case 4: 233 case 5: 234 case 6: 235 i2c_phy_addr = i2c_addr[3]; 236 phy_addr = 0xc; 237 break; 238 } 239 240 /* Check the PHY status */ 241 ret = miiphy_set_current_dev(dev); 242 ret = miiphy_write(dev, phy_addr, 0x1f, 3); 243 mdelay(10); 244 ret = miiphy_read(dev, phy_addr, 0x11, &value); 245 mdelay(10); 246 ret = miiphy_read(dev, phy_addr, 0x11, &value); 247 mdelay(10); 248 if ((value & 0xf) == 0xf) { 249 miiphy_write(dev, phy_addr, 0x1f, 0); 250 printf("DPMAC %d :PHY is ..... Configured\n", dpmac); 251 return; 252 } 253 254 for (i = 0; i < 4; i++) { 255 for (j = 0; j < 4; j++) { 256 a = 0x18; 257 i2c_write(i2c_phy_addr, 6, 1, &a, 1); 258 a = 0x38; 259 i2c_write(i2c_phy_addr, 4, 1, &a, 1); 260 a = 0x4; 261 i2c_write(i2c_phy_addr, 8, 1, &a, 1); 262 263 i2c_write(i2c_phy_addr, 0xf, 1, &ch_a_eq[i], 1); 264 i2c_write(i2c_phy_addr, 0x11, 1, &ch_a_ctl2[j], 1); 265 266 i2c_write(i2c_phy_addr, 0x16, 1, &ch_b_eq[i], 1); 267 i2c_write(i2c_phy_addr, 0x18, 1, &ch_b_ctl2[j], 1); 268 269 a = 0x14; 270 i2c_write(i2c_phy_addr, 0x23, 1, &a, 1); 271 a = 0xb5; 272 i2c_write(i2c_phy_addr, 0x2d, 1, &a, 1); 273 a = 0x20; 274 i2c_write(i2c_phy_addr, 4, 1, &a, 1); 275 mdelay(100); 276 ret = miiphy_read(dev, phy_addr, 0x11, &value); 277 if (ret > 0) 278 goto error; 279 mdelay(1); 280 ret = miiphy_read(dev, phy_addr, 0x11, &value); 281 if (ret > 0) 282 goto error; 283 mdelay(10); 284 if ((value & 0xf) == 0xf) { 285 miiphy_write(dev, phy_addr, 0x1f, 0); 286 printf("DPMAC %d :PHY is ..... Configured\n", 287 dpmac); 288 return; 289 } 290 } 291 } 292 error: 293 printf("DPMAC %d :PHY ..... FAILED to configure PHY\n", dpmac); 294 return; 295 } 296 297 static const char *ls1088a_qds_mdio_name_for_muxval(u8 muxval) 298 { 299 return mdio_names[muxval]; 300 } 301 302 struct mii_dev *mii_dev_for_muxval(u8 muxval) 303 { 304 struct mii_dev *bus; 305 const char *name = ls1088a_qds_mdio_name_for_muxval(muxval); 306 307 if (!name) { 308 printf("No bus for muxval %x\n", muxval); 309 return NULL; 310 } 311 312 bus = miiphy_get_dev_by_name(name); 313 314 if (!bus) { 315 printf("No bus by name %s\n", name); 316 return NULL; 317 } 318 319 return bus; 320 } 321 322 static void ls1088a_qds_enable_SFP_TX(u8 muxval) 323 { 324 u8 brdcfg9; 325 326 brdcfg9 = QIXIS_READ(brdcfg[9]); 327 brdcfg9 &= ~BRDCFG9_SFPTX_MASK; 328 brdcfg9 |= (muxval << BRDCFG9_SFPTX_SHIFT); 329 QIXIS_WRITE(brdcfg[9], brdcfg9); 330 } 331 332 static void ls1088a_qds_mux_mdio(u8 muxval) 333 { 334 u8 brdcfg4; 335 336 if (muxval <= 5) { 337 brdcfg4 = QIXIS_READ(brdcfg[4]); 338 brdcfg4 &= ~BRDCFG4_EMISEL_MASK; 339 brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT); 340 QIXIS_WRITE(brdcfg[4], brdcfg4); 341 } 342 } 343 344 static int ls1088a_qds_mdio_read(struct mii_dev *bus, int addr, 345 int devad, int regnum) 346 { 347 struct ls1088a_qds_mdio *priv = bus->priv; 348 349 ls1088a_qds_mux_mdio(priv->muxval); 350 351 return priv->realbus->read(priv->realbus, addr, devad, regnum); 352 } 353 354 static int ls1088a_qds_mdio_write(struct mii_dev *bus, int addr, int devad, 355 int regnum, u16 value) 356 { 357 struct ls1088a_qds_mdio *priv = bus->priv; 358 359 ls1088a_qds_mux_mdio(priv->muxval); 360 361 return priv->realbus->write(priv->realbus, addr, devad, regnum, value); 362 } 363 364 static int ls1088a_qds_mdio_reset(struct mii_dev *bus) 365 { 366 struct ls1088a_qds_mdio *priv = bus->priv; 367 368 return priv->realbus->reset(priv->realbus); 369 } 370 371 static int ls1088a_qds_mdio_init(char *realbusname, u8 muxval) 372 { 373 struct ls1088a_qds_mdio *pmdio; 374 struct mii_dev *bus = mdio_alloc(); 375 376 if (!bus) { 377 printf("Failed to allocate ls1088a_qds MDIO bus\n"); 378 return -1; 379 } 380 381 pmdio = malloc(sizeof(*pmdio)); 382 if (!pmdio) { 383 printf("Failed to allocate ls1088a_qds private data\n"); 384 free(bus); 385 return -1; 386 } 387 388 bus->read = ls1088a_qds_mdio_read; 389 bus->write = ls1088a_qds_mdio_write; 390 bus->reset = ls1088a_qds_mdio_reset; 391 sprintf(bus->name, ls1088a_qds_mdio_name_for_muxval(muxval)); 392 393 pmdio->realbus = miiphy_get_dev_by_name(realbusname); 394 395 if (!pmdio->realbus) { 396 printf("No bus with name %s\n", realbusname); 397 free(bus); 398 free(pmdio); 399 return -1; 400 } 401 402 pmdio->muxval = muxval; 403 bus->priv = pmdio; 404 405 return mdio_register(bus); 406 } 407 408 /* 409 * Initialize the dpmac_info array. 410 * 411 */ 412 static void initialize_dpmac_to_slot(void) 413 { 414 struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; 415 u32 serdes1_prtcl, cfg; 416 417 cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) & 418 FSL_CHASSIS3_SRDS1_PRTCL_MASK; 419 cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT; 420 serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg); 421 422 switch (serdes1_prtcl) { 423 case 0x12: 424 printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n", 425 serdes1_prtcl); 426 lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1; 427 lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1; 428 lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1; 429 lane_to_slot_fsm1[3] = EMI1_SLOT1 - 1; 430 break; 431 case 0x15: 432 case 0x1D: 433 printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n", 434 serdes1_prtcl); 435 lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1; 436 lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1; 437 lane_to_slot_fsm1[2] = EMI_NONE; 438 lane_to_slot_fsm1[3] = EMI_NONE; 439 break; 440 case 0x1E: 441 printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n", 442 serdes1_prtcl); 443 lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1; 444 lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1; 445 lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1; 446 lane_to_slot_fsm1[3] = EMI_NONE; 447 break; 448 case 0x3A: 449 printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n", 450 serdes1_prtcl); 451 lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1; 452 lane_to_slot_fsm1[1] = EMI_NONE; 453 lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1; 454 lane_to_slot_fsm1[3] = EMI1_SLOT1 - 1; 455 break; 456 457 default: 458 printf("%s qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n", 459 __func__, serdes1_prtcl); 460 break; 461 } 462 } 463 464 void ls1088a_handle_phy_interface_sgmii(int dpmac_id) 465 { 466 struct mii_dev *bus; 467 struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; 468 u32 serdes1_prtcl, cfg; 469 470 cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) & 471 FSL_CHASSIS3_SRDS1_PRTCL_MASK; 472 cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT; 473 serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg); 474 475 int *riser_phy_addr; 476 char *env_hwconfig = env_get("hwconfig"); 477 478 if (hwconfig_f("xqsgmii", env_hwconfig)) 479 riser_phy_addr = &xqsgii_riser_phy_addr[0]; 480 else 481 riser_phy_addr = &sgmii_riser_phy_addr[0]; 482 483 switch (serdes1_prtcl) { 484 case 0x12: 485 case 0x15: 486 case 0x1E: 487 case 0x3A: 488 switch (dpmac_id) { 489 case 1: 490 wriop_set_phy_address(dpmac_id, 0, riser_phy_addr[1]); 491 break; 492 case 2: 493 wriop_set_phy_address(dpmac_id, 0, riser_phy_addr[0]); 494 break; 495 case 3: 496 wriop_set_phy_address(dpmac_id, 0, riser_phy_addr[3]); 497 break; 498 case 7: 499 wriop_set_phy_address(dpmac_id, 0, riser_phy_addr[2]); 500 break; 501 default: 502 printf("WRIOP: Wrong DPMAC%d set to SGMII", dpmac_id); 503 break; 504 } 505 break; 506 default: 507 printf("%s qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n", 508 __func__, serdes1_prtcl); 509 return; 510 } 511 dpmac_info[dpmac_id].board_mux = EMI1_SLOT1; 512 bus = mii_dev_for_muxval(EMI1_SLOT1); 513 wriop_set_mdio(dpmac_id, bus); 514 } 515 516 void ls1088a_handle_phy_interface_qsgmii(int dpmac_id) 517 { 518 struct mii_dev *bus; 519 struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; 520 u32 serdes1_prtcl, cfg; 521 522 cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) & 523 FSL_CHASSIS3_SRDS1_PRTCL_MASK; 524 cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT; 525 serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg); 526 527 switch (serdes1_prtcl) { 528 case 0x1D: 529 case 0x1E: 530 switch (dpmac_id) { 531 case 3: 532 case 4: 533 case 5: 534 case 6: 535 wriop_set_phy_address(dpmac_id, 0, dpmac_id + 9); 536 break; 537 case 7: 538 case 8: 539 case 9: 540 case 10: 541 wriop_set_phy_address(dpmac_id, 0, dpmac_id + 1); 542 break; 543 } 544 545 dpmac_info[dpmac_id].board_mux = EMI1_SLOT1; 546 bus = mii_dev_for_muxval(EMI1_SLOT1); 547 wriop_set_mdio(dpmac_id, bus); 548 break; 549 default: 550 printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n", 551 serdes1_prtcl); 552 break; 553 } 554 } 555 556 void ls1088a_handle_phy_interface_xsgmii(int i) 557 { 558 struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; 559 u32 serdes1_prtcl, cfg; 560 561 cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) & 562 FSL_CHASSIS3_SRDS1_PRTCL_MASK; 563 cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT; 564 serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg); 565 566 switch (serdes1_prtcl) { 567 case 0x15: 568 case 0x1D: 569 case 0x1E: 570 wriop_set_phy_address(i, 0, i + 26); 571 ls1088a_qds_enable_SFP_TX(SFP_TX); 572 break; 573 default: 574 printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n", 575 serdes1_prtcl); 576 break; 577 } 578 } 579 580 static void ls1088a_handle_phy_interface_rgmii(int dpmac_id) 581 { 582 struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; 583 u32 serdes1_prtcl, cfg; 584 struct mii_dev *bus; 585 586 cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) & 587 FSL_CHASSIS3_SRDS1_PRTCL_MASK; 588 cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT; 589 serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg); 590 591 switch (dpmac_id) { 592 case 4: 593 wriop_set_phy_address(dpmac_id, 0, RGMII_PHY1_ADDR); 594 dpmac_info[dpmac_id].board_mux = EMI1_RGMII1; 595 bus = mii_dev_for_muxval(EMI1_RGMII1); 596 wriop_set_mdio(dpmac_id, bus); 597 break; 598 case 5: 599 wriop_set_phy_address(dpmac_id, 0, RGMII_PHY2_ADDR); 600 dpmac_info[dpmac_id].board_mux = EMI1_RGMII2; 601 bus = mii_dev_for_muxval(EMI1_RGMII2); 602 wriop_set_mdio(dpmac_id, bus); 603 break; 604 default: 605 printf("qds: WRIOP: Unsupported RGMII SerDes Protocol 0x%02x\n", 606 serdes1_prtcl); 607 break; 608 } 609 } 610 #endif 611 612 int board_eth_init(bd_t *bis) 613 { 614 int error = 0, i; 615 #ifdef CONFIG_FSL_MC_ENET 616 struct memac_mdio_info *memac_mdio0_info; 617 char *env_hwconfig = env_get("hwconfig"); 618 619 initialize_dpmac_to_slot(); 620 621 memac_mdio0_info = (struct memac_mdio_info *)malloc( 622 sizeof(struct memac_mdio_info)); 623 memac_mdio0_info->regs = 624 (struct memac_mdio_controller *) 625 CONFIG_SYS_FSL_WRIOP1_MDIO1; 626 memac_mdio0_info->name = DEFAULT_WRIOP_MDIO1_NAME; 627 628 /* Register the real MDIO1 bus */ 629 fm_memac_mdio_init(bis, memac_mdio0_info); 630 /* Register the muxing front-ends to the MDIO buses */ 631 ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_RGMII1); 632 ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_RGMII2); 633 ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT1); 634 635 for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) { 636 switch (wriop_get_enet_if(i)) { 637 case PHY_INTERFACE_MODE_RGMII: 638 case PHY_INTERFACE_MODE_RGMII_ID: 639 ls1088a_handle_phy_interface_rgmii(i); 640 break; 641 case PHY_INTERFACE_MODE_QSGMII: 642 ls1088a_handle_phy_interface_qsgmii(i); 643 break; 644 case PHY_INTERFACE_MODE_SGMII: 645 ls1088a_handle_phy_interface_sgmii(i); 646 break; 647 case PHY_INTERFACE_MODE_XGMII: 648 ls1088a_handle_phy_interface_xsgmii(i); 649 break; 650 default: 651 break; 652 653 if (i == 16) 654 i = NUM_WRIOP_PORTS; 655 } 656 } 657 658 error = cpu_eth_init(bis); 659 660 if (hwconfig_f("xqsgmii", env_hwconfig)) { 661 for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) { 662 switch (wriop_get_enet_if(i)) { 663 case PHY_INTERFACE_MODE_QSGMII: 664 qsgmii_configure_repeater(i); 665 break; 666 case PHY_INTERFACE_MODE_SGMII: 667 sgmii_configure_repeater(i); 668 break; 669 default: 670 break; 671 } 672 673 if (i == 16) 674 i = NUM_WRIOP_PORTS; 675 } 676 } 677 #endif 678 error = pci_eth_init(bis); 679 return error; 680 } 681 682 #if defined(CONFIG_RESET_PHY_R) 683 void reset_phy(void) 684 { 685 mc_env_boot(); 686 } 687 #endif /* CONFIG_RESET_PHY_R */ 688