1 /* 2 * Copyright 2017 NXP 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #include <common.h> 8 #include <fsl_ddr_sdram.h> 9 #include <fsl_ddr_dimm_params.h> 10 #include <asm/arch/soc.h> 11 #include <asm/arch/clock.h> 12 #include "ddr.h" 13 14 DECLARE_GLOBAL_DATA_PTR; 15 16 void fsl_ddr_board_options(memctl_options_t *popts, 17 dimm_params_t *pdimm, 18 unsigned int ctrl_num) 19 { 20 const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; 21 ulong ddr_freq; 22 23 if (ctrl_num > 1) { 24 printf("Not supported controller number %d\n", ctrl_num); 25 return; 26 } 27 if (!pdimm->n_ranks) 28 return; 29 30 /* 31 * we use identical timing for all slots. If needed, change the code 32 * to pbsp = rdimms[ctrl_num] or pbsp = udimms[ctrl_num]; 33 */ 34 pbsp = udimms[0]; 35 36 /* Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr 37 * freqency and n_banks specified in board_specific_parameters table. 38 */ 39 ddr_freq = get_ddr_freq(0) / 1000000; 40 while (pbsp->datarate_mhz_high) { 41 if (pbsp->n_ranks == pdimm->n_ranks) { 42 if (ddr_freq <= pbsp->datarate_mhz_high) { 43 popts->clk_adjust = pbsp->clk_adjust; 44 popts->wrlvl_start = pbsp->wrlvl_start; 45 popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; 46 popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; 47 goto found; 48 } 49 pbsp_highest = pbsp; 50 } 51 pbsp++; 52 } 53 54 if (pbsp_highest) { 55 printf("Error: board specific timing not found for %lu MT/s\n", 56 ddr_freq); 57 printf("Trying to use the highest speed (%u) parameters\n", 58 pbsp_highest->datarate_mhz_high); 59 popts->clk_adjust = pbsp_highest->clk_adjust; 60 popts->wrlvl_start = pbsp_highest->wrlvl_start; 61 popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; 62 popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; 63 } else { 64 panic("DIMM is not supported by this board"); 65 } 66 found: 67 debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n" 68 "\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, wrlvl_ctrl_3 0x%x\n", 69 pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb, 70 pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2, 71 pbsp->wrlvl_ctl_3); 72 73 74 75 popts->half_strength_driver_enable = 0; 76 /* 77 * Write leveling override 78 */ 79 popts->wrlvl_override = 1; 80 popts->wrlvl_sample = 0xf; 81 82 83 /* Enable ZQ calibration */ 84 popts->zq_en = 1; 85 86 /* Enable DDR hashing */ 87 popts->addr_hash = 1; 88 89 popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_60ohm); 90 popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_60ohm) | 91 DDR_CDR2_VREF_TRAIN_EN | DDR_CDR2_VREF_RANGE_2; 92 } 93 94 95 int fsl_initdram(void) 96 { 97 puts("Initializing DDR....using SPD\n"); 98 99 gd->ram_size = fsl_ddr_sdram(); 100 101 return 0; 102 } 103