1Overview
2--------
3The LS1043A Reference Design Board (RDB) is a high-performance computing,
4evaluation, and development platform that supports the QorIQ LS1043A
5LayerScape Architecture processor. The LS1043ARDB provides SW development
6platform for the Freescale LS1043A processor series, with a complete
7debugging environment. The LS1043A RDB is lead-free and RoHS-compliant.
8
9LS1043A SoC Overview
10--------------------
11The LS1043A integrated multicore processor combines four ARM Cortex-A53
12processor cores with datapath acceleration optimized for L2/3 packet
13processing, single pass security offload and robust traffic management
14and quality of service.
15
16The LS1043A SoC includes the following function and features:
17 - Four 64-bit ARM Cortex-A53 CPUs
18 - 1 MB unified L2 Cache
19 - One 32-bit DDR3L/DDR4 SDRAM memory controllers with ECC and interleaving
20   support
21 - Data Path Acceleration Architecture (DPAA) incorporating acceleration the
22   the following functions:
23   - Packet parsing, classification, and distribution (FMan)
24   - Queue management for scheduling, packet sequencing, and congestion
25     management (QMan)
26   - Hardware buffer management for buffer allocation and de-allocation (BMan)
27   - Cryptography acceleration (SEC)
28 - Ethernet interfaces by FMan
29   - Up to 1 x XFI supporting 10G interface
30   - Up to 1 x QSGMII
31   - Up to 4 x SGMII supporting 1000Mbps
32   - Up to 2 x SGMII supporting 2500Mbps
33   - Up to 2 x RGMII supporting 1000Mbps
34 - High-speed peripheral interfaces
35   - Three PCIe 2.0 controllers, one supporting x4 operation
36   - One serial ATA (SATA 3.0) controllers
37 - Additional peripheral interfaces
38   - Three high-speed USB 3.0 controllers with integrated PHY
39   - Enhanced secure digital host controller (eSDXC/eMMC)
40   - Quad Serial Peripheral Interface (QSPI) Controller
41   - Serial peripheral interface (SPI) controller
42   - Four I2C controllers
43   - Two DUARTs
44   - Integrated flash controller supporting NAND and NOR flash
45 - QorIQ platform's trust architecture 2.1
46
47 LS1043ARDB board Overview
48 -----------------------
49 - SERDES Connections, 4 lanes supporting:
50      - PCI Express 2.0 with two PCIe connectors supporting: miniPCIe card and
51        standard PCIe card
52      - QSGMII with x4 RJ45 connector
53      - XFI with x1 RJ45 connector
54 - DDR Controller
55     - 2GB 32bits DDR4 SDRAM. Support rates of up to 1600MT/s
56 -IFC/Local Bus
57    - One 128MB NOR flash 16-bit data bus
58    - One 512 MB NAND flash with ECC support
59    - CPLD connection
60 - USB 3.0
61    - Two super speed USB 3.0 Type A ports
62 - SDHC: connects directly to a full SD/MMC slot
63 - DSPI: 16 MB high-speed flash Memory for boot code and storage (up to 108MHz)
64 - 4 I2C controllers
65 - UART
66   - Two 4-pin serial ports at up to 115.2 Kbit/s
67   - Two DB9 D-Type connectors supporting one Serial port each
68 - ARM JTAG support
69
70Memory map from core's view
71----------------------------
72Start Address	End Address	Description		Size
730x00_0000_0000	0x00_000F_FFFF	Secure Boot ROM		1MB
740x00_0100_0000	0x00_0FFF_FFFF	CCSRBAR			240MB
750x00_1000_0000	0x00_1000_FFFF	OCRAM0			64KB
760x00_1001_0000	0x00_1001_FFFF	OCRAM1			64KB
770x00_2000_0000	0x00_20FF_FFFF	DCSR			16MB
780x00_6000_0000	0x00_67FF_FFFF	IFC - NOR Flash		128MB
790x00_7E80_0000	0x00_7E80_FFFF	IFC - NAND Flash	64KB
800x00_7FB0_0000	0x00_7FB0_0FFF	IFC - FPGA		4KB
810x00_8000_0000	0x00_FFFF_FFFF	DRAM1			2GB
82
83Booting Options
84---------------
85a) NOR boot
86