1Overview
2--------
3The LS1021ATWR is a Freescale reference board that hosts the LS1021A SoC.
4
5LS1021A SoC Overview
6------------------
7The QorIQ LS1 family, which includes the LS1021A communications processor,
8is built on Layerscape architecture, the industry's first software-aware,
9core-agnostic networking architecture to offer unprecedented efficiency
10and scale.
11
12A member of the value-performance tier, the QorIQ LS1021A processor provides
13extensive integration and power efficiency for fanless, small form factor
14enterprise networking applications. Incorporating dual ARM Cortex-A7 cores
15running up to 1.0 GHz, the LS1021A processor delivers pre-silicon CoreMark
16performance of over 6,000, as well as virtualization support, advanced
17security features and the broadest array of high-speed interconnects and
18optimized peripheral features ever offered in a sub-3 W processor.
19
20The QorIQ LS1021A processor features an integrated LCD controller,
21CAN controller for implementing industrial protocols, DDR3L/4 running
22up to 1600 MHz, integrated security engine and QUICC Engine, and ECC
23protection on both L1 and L2 caches. The LS1021A processor is pin- and
24software-compatible with the QorIQ LS1020A and LS1022A processors.
25
26The LS1021A SoC includes the following function and features:
27
28 - ARM Cortex-A7 MPCore compliant with ARMv7-A architecture
29 - Dual high-preformance ARM Cortex-A7 cores, each core includes:
30   - 32 Kbyte L1 Instruction Cache and Data Cache for each core (ECC protection)
31   - 512 Kbyte shared coherent L2 Cache (with ECC protection)
32   - NEON Co-processor (per core)
33   - 40-bit physical addressing
34   - Vector floating-point support
35 - ARM Core-Link CCI-400 Cache Coherent Interconnect
36 - One DDR3L/DDR4 SDRAM memory controller with x8/x16/x32-bit configuration
37   supporting speeds up to 1600Mtps
38   - ECC and interleaving support
39 - VeTSEC Ethernet complex
40   - Up to 3x virtualized 10/100/1000 Ethernet controllers
41   - MII, RMII, RGMII, and SGMII support
42   - QoS, lossless flow control, and IEEE 1588 support
43 - 4-lane 6GHz SerDes
44 - High speed interconnect (4 SerDes lanes with are muxed for these protocol)
45   - Two PCI Express Gen2 controllers running at up to 5 GHz
46   - One Serial ATA 3.0 supporting 6 GT/s operation
47   - Two SGMII interfaces supporting 1000 Mbps
48 - Additional peripheral interfaces
49   - One high-speed USB 3.0 controller with integrated PHY and one high-speed
50     USB 2.00 controller with ULPI
51   - Integrated flash controller (IFC) with 16-bit interface
52   - Quad SPI NOR Flash
53   - One enhanced Secure digital host controller
54   - Display controller unit (DCU) 24-bit RGB (12-bit DDR pin interface)
55   - Ten UARTs comprised of two 16550 compliant DUARTs, and six low power
56     UARTs
57   - Three I2C controllers
58   - Eight FlexTimers four supporting PWM and four FlexCAN ports
59   - Four GPIO controllers supporting up to 109 general purpose I/O signals
60 - Integrated advanced audio block:
61   - Four synchronous audio interfaces (SAI)
62   - Sony/Philips Digital Interconnect Format (SPDIF)
63   - Asynchronous Sample Rate Converter (ASRC)
64 - Hardware based crypto offload engine
65   - IPSec forwarding at up to 1Gbps
66   - QorIQ Trust Architecture, Secure Boot, and ARM TrustZone supported
67   - Public key hardware accelerator
68   - True Random Number Generator (NIST Certified)
69   - Advanced Encryption Standard Accelerators (AESA)
70   - Data Encryption Standard Accelerators
71 - QUICC Engine ULite block
72   - Two universal communication controllers (TDM and HDLC) supporting 64
73   multichannels, each running at 64 Kbps
74   - Support for 256 channels of HDLC
75 - QorIQ TrustArchitecture with Secure Boot, as well as ARM TrustZone supported
76
77LS1021ATWR board Overview
78-------------------------
79 - DDR Controller
80     - Supports rates of up to 1600 MHz data-rate
81     - Supports one DDR3LP SDRAM.
82 - IFC/Local Bus
83     - NOR: 128MB 16-bit NOR Flash
84 - Ethernet
85     - Three on-board RGMII 10/100/1G ethernet ports.
86 - CPLD
87 - Clocks
88     - System and DDR clock (SYSCLK, DDRCLK)
89     - SERDES clocks
90 - Power Supplies
91 - SDHC
92     - SDHC/SDXC connector
93 - Other IO
94    - One Serial port
95    - Three I2C ports
96
97Memory map
98-----------
99The addresses in brackets are physical addresses.
100
101Start Address	End Address	Description			Size
1020x00_0000_0000	0x00_000F_FFFF	Secure Boot ROM			1MB
1030x00_0100_0000	0x00_0FFF_FFFF	CCSRBAR				240MB
1040x00_1000_0000	0x00_1000_FFFF	OCRAM0				64KB
1050x00_1001_0000	0x00_1001_FFFF	OCRAM1				64KB
1060x00_2000_0000	0x00_20FF_FFFF	DCSR				16MB
1070x00_4000_0000	0x00_5FFF_FFFF	QSPI				512MB
1080x00_6000_0000	0x00_67FF_FFFF	IFC - NOR Flash			128MB
1090x00_8000_0000	0x00_FFFF_FFFF	DRAM1				2GB
110