1 /*
2  * Copyright 2016 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #include <common.h>
8 #include <i2c.h>
9 #include <asm/io.h>
10 #include <asm/arch/clock.h>
11 #include <asm/arch/fsl_serdes.h>
12 #include <asm/arch/soc.h>
13 #include <hwconfig.h>
14 #include <ahci.h>
15 #include <mmc.h>
16 #include <scsi.h>
17 #include <fsl_esdhc.h>
18 #include <environment.h>
19 #include <fsl_mmdc.h>
20 #include <netdev.h>
21 
22 DECLARE_GLOBAL_DATA_PTR;
23 
24 int checkboard(void)
25 {
26 	u8 in1;
27 
28 	puts("Board: LS1012ARDB ");
29 
30 	/* Initialize i2c early for Serial flash bank information */
31 	i2c_set_bus_num(0);
32 
33 	if (i2c_read(I2C_MUX_IO1_ADDR, 1, 1, &in1, 1) < 0) {
34 		printf("Error reading i2c boot information!\n");
35 		return 0; /* Don't want to hang() on this error */
36 	}
37 
38 	puts("Version");
39 	if ((in1 & (~__SW_REV_MASK)) == __SW_REV_A)
40 		puts(": RevA");
41 	else if ((in1 & (~__SW_REV_MASK)) == __SW_REV_B)
42 		puts(": RevB");
43 	else
44 		puts(": unknown");
45 
46 	printf(", boot from QSPI");
47 	if ((in1 & (~__SW_BOOT_MASK)) == __SW_BOOT_EMU)
48 		puts(": emu\n");
49 	else if ((in1 & (~__SW_BOOT_MASK)) == __SW_BOOT_BANK1)
50 		puts(": bank1\n");
51 	else if ((in1 & (~__SW_BOOT_MASK)) == __SW_BOOT_BANK2)
52 		puts(": bank2\n");
53 	else
54 		puts("unknown\n");
55 
56 	return 0;
57 }
58 
59 int dram_init(void)
60 {
61 	static const struct fsl_mmdc_info mparam = {
62 		0x05180000,	/* mdctl */
63 		0x00030035,	/* mdpdc */
64 		0x12554000,	/* mdotc */
65 		0xbabf7954,	/* mdcfg0 */
66 		0xdb328f64,	/* mdcfg1 */
67 		0x01ff00db,	/* mdcfg2 */
68 		0x00001680,	/* mdmisc */
69 		0x0f3c8000,	/* mdref */
70 		0x00002000,	/* mdrwd */
71 		0x00bf1023,	/* mdor */
72 		0x0000003f,	/* mdasp */
73 		0x0000022a,	/* mpodtctrl */
74 		0xa1390003,	/* mpzqhwctrl */
75 	};
76 
77 	mmdc_init(&mparam);
78 
79 	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
80 
81 	return 0;
82 }
83 
84 int board_eth_init(bd_t *bis)
85 {
86 	return pci_eth_init(bis);
87 }
88 
89 int board_early_init_f(void)
90 {
91 	fsl_lsch2_early_init_f();
92 
93 	return 0;
94 }
95 
96 int board_init(void)
97 {
98 	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
99 	/*
100 	 * Set CCI-400 control override register to enable barrier
101 	 * transaction
102 	 */
103 	out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER);
104 
105 #ifdef CONFIG_SYS_FSL_ERRATUM_A010315
106 	erratum_a010315();
107 #endif
108 
109 #ifdef CONFIG_ENV_IS_NOWHERE
110 	gd->env_addr = (ulong)&default_environment[0];
111 #endif
112 
113 	return 0;
114 }
115 
116 int ft_board_setup(void *blob, bd_t *bd)
117 {
118 	arch_fixup_fdt(blob);
119 
120 	ft_cpu_setup(blob, bd);
121 
122 	return 0;
123 }
124