1 /* 2 * Copyright 2009-2011 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #include <common.h> 8 #include <command.h> 9 #include <netdev.h> 10 #include <linux/compiler.h> 11 #include <asm/mmu.h> 12 #include <asm/processor.h> 13 #include <asm/cache.h> 14 #include <asm/immap_85xx.h> 15 #include <asm/fsl_law.h> 16 #include <asm/fsl_serdes.h> 17 #include <asm/fsl_liodn.h> 18 #include <fm_eth.h> 19 20 #include "../common/ngpixis.h" 21 #include "corenet_ds.h" 22 23 DECLARE_GLOBAL_DATA_PTR; 24 25 int checkboard (void) 26 { 27 u8 sw; 28 struct cpu_type *cpu = gd->arch.cpu; 29 #if defined(CONFIG_TARGET_P3041DS) || defined(CONFIG_TARGET_P5020DS) || \ 30 defined(CONFIG_TARGET_P5040DS) 31 unsigned int i; 32 #endif 33 static const char * const freq[] = {"100", "125", "156.25", "212.5" }; 34 35 printf("Board: %sDS, ", cpu->name); 36 printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", 37 in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver)); 38 39 sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH)); 40 sw = (sw & PIXIS_LBMAP_MASK) >> PIXIS_LBMAP_SHIFT; 41 42 if (sw < 0x8) 43 printf("vBank: %d\n", sw); 44 else if (sw == 0x8) 45 puts("Promjet\n"); 46 else if (sw == 0x9) 47 puts("NAND\n"); 48 else 49 printf("invalid setting of SW%u\n", PIXIS_LBMAP_SWITCH); 50 51 /* Display the actual SERDES reference clocks as configured by the 52 * dip switches on the board. Note that the SWx registers could 53 * technically be set to force the reference clocks to match the 54 * values that the SERDES expects (or vice versa). For now, however, 55 * we just display both values and hope the user notices when they 56 * don't match. 57 */ 58 puts("SERDES Reference Clocks: "); 59 #if defined(CONFIG_TARGET_P3041DS) || defined(CONFIG_TARGET_P5020DS) || \ 60 defined(CONFIG_TARGET_P5040DS) 61 sw = in_8(&PIXIS_SW(5)); 62 for (i = 0; i < 3; i++) { 63 unsigned int clock = (sw >> (6 - (2 * i))) & 3; 64 65 printf("Bank%u=%sMhz ", i+1, freq[clock]); 66 } 67 #ifdef CONFIG_TARGET_P5040DS 68 /* On P5040DS, SW11[7:8] determines the Bank 4 frequency */ 69 sw = in_8(&PIXIS_SW(9)); 70 printf("Bank4=%sMhz ", freq[sw & 3]); 71 #endif 72 puts("\n"); 73 #else 74 sw = in_8(&PIXIS_SW(3)); 75 /* SW3[2]: 0 = 100 Mhz, 1 = 125 MHz */ 76 /* SW3[3]: 0 = 125 Mhz, 1 = 156.25 MHz */ 77 /* SW3[4]: 0 = 125 Mhz, 1 = 156.25 MHz */ 78 printf("Bank1=%sMHz ", freq[!!(sw & 0x40)]); 79 printf("Bank2=%sMHz ", freq[1 + !!(sw & 0x20)]); 80 printf("Bank3=%sMHz\n", freq[1 + !!(sw & 0x10)]); 81 #endif 82 83 return 0; 84 } 85 86 int board_early_init_f(void) 87 { 88 volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 89 90 /* 91 * P4080 DS board only uses the DDR1_MCK0/3 and DDR2_MCK0/3 92 * disable the DDR1_MCK1/2/4/5 and DDR2_MCK1/2/4/5 to reduce 93 * the noise introduced by these unterminated and unused clock pairs. 94 */ 95 setbits_be32(&gur->ddrclkdr, 0x001B001B); 96 97 return 0; 98 } 99 100 int board_early_init_r(void) 101 { 102 const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; 103 int flash_esel = find_tlb_idx((void *)flashbase, 1); 104 105 /* 106 * Remap Boot flash + PROMJET region to caching-inhibited 107 * so that flash can be erased properly. 108 */ 109 110 /* Flush d-cache and invalidate i-cache of any FLASH data */ 111 flush_dcache(); 112 invalidate_icache(); 113 114 if (flash_esel == -1) { 115 /* very unlikely unless something is messed up */ 116 puts("Error: Could not find TLB for FLASH BASE\n"); 117 flash_esel = 2; /* give our best effort to continue */ 118 } else { 119 /* invalidate existing TLB entry for flash + promjet */ 120 disable_tlb(flash_esel); 121 } 122 123 set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */ 124 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */ 125 0, flash_esel, BOOKE_PAGESZ_256M, 1); /* ts, esel, tsize, iprot */ 126 127 return 0; 128 } 129 130 #define NUM_SRDS_BANKS 3 131 132 int misc_init_r(void) 133 { 134 serdes_corenet_t *srds_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; 135 u32 actual[NUM_SRDS_BANKS]; 136 unsigned int i; 137 u8 sw; 138 139 #if defined(CONFIG_TARGET_P3041DS) || defined(CONFIG_TARGET_P5020DS) || \ 140 defined(CONFIG_TARGET_P5040DS) 141 sw = in_8(&PIXIS_SW(5)); 142 for (i = 0; i < 3; i++) { 143 unsigned int clock = (sw >> (6 - (2 * i))) & 3; 144 switch (clock) { 145 case 0: 146 actual[i] = SRDS_PLLCR0_RFCK_SEL_100; 147 break; 148 case 1: 149 actual[i] = SRDS_PLLCR0_RFCK_SEL_125; 150 break; 151 case 2: 152 actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25; 153 break; 154 default: 155 printf("Warning: SDREFCLK%u switch setting of '11' is " 156 "unsupported\n", i + 1); 157 break; 158 } 159 } 160 #else 161 /* Warn if the expected SERDES reference clocks don't match the 162 * actual reference clocks. This needs to be done after calling 163 * p4080_erratum_serdes8(), since that function may modify the clocks. 164 */ 165 sw = in_8(&PIXIS_SW(3)); 166 actual[0] = (sw & 0x40) ? 167 SRDS_PLLCR0_RFCK_SEL_125 : SRDS_PLLCR0_RFCK_SEL_100; 168 actual[1] = (sw & 0x20) ? 169 SRDS_PLLCR0_RFCK_SEL_156_25 : SRDS_PLLCR0_RFCK_SEL_125; 170 actual[2] = (sw & 0x10) ? 171 SRDS_PLLCR0_RFCK_SEL_156_25 : SRDS_PLLCR0_RFCK_SEL_125; 172 #endif 173 174 for (i = 0; i < NUM_SRDS_BANKS; i++) { 175 u32 expected = srds_regs->bank[i].pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK; 176 if (expected != actual[i]) { 177 printf("Warning: SERDES bank %u expects reference clock" 178 " %sMHz, but actual is %sMHz\n", i + 1, 179 serdes_clock_to_string(expected), 180 serdes_clock_to_string(actual[i])); 181 } 182 } 183 184 return 0; 185 } 186 187 int ft_board_setup(void *blob, bd_t *bd) 188 { 189 phys_addr_t base; 190 phys_size_t size; 191 192 ft_cpu_setup(blob, bd); 193 194 base = getenv_bootm_low(); 195 size = getenv_bootm_size(); 196 197 fdt_fixup_memory(blob, (u64)base, (u64)size); 198 199 #ifdef CONFIG_PCI 200 pci_of_setup(blob, bd); 201 #endif 202 203 fdt_fixup_liodn(blob); 204 fsl_fdt_fixup_dr_usb(blob, bd); 205 206 #ifdef CONFIG_SYS_DPAA_FMAN 207 fdt_fixup_fman_ethernet(blob); 208 fdt_fixup_board_enet(blob); 209 #endif 210 211 return 0; 212 } 213