1 /*
2  * Copyright 2006, 2008-2009, 2011 Freescale Semiconductor
3  * York Sun (yorksun@freescale.com)
4  * Haiying Wang (haiying.wang@freescale.com)
5  * Timur Tabi (timur@freescale.com)
6  *
7  * SPDX-License-Identifier:	GPL-2.0+
8  */
9 
10 #include <common.h>
11 #include <command.h>
12 #include <i2c.h>
13 #include <linux/ctype.h>
14 
15 #ifdef CONFIG_SYS_I2C_EEPROM_CCID
16 #include "../common/eeprom.h"
17 #define MAX_NUM_PORTS	8
18 #endif
19 
20 #ifdef CONFIG_SYS_I2C_EEPROM_NXID
21 /* some boards with non-256-bytes EEPROM have special define */
22 /* for MAX_NUM_PORTS in board-specific file */
23 #ifndef MAX_NUM_PORTS
24 #define MAX_NUM_PORTS	16
25 #endif
26 #define NXID_VERSION	1
27 #endif
28 
29 /**
30  * static eeprom: EEPROM layout for CCID or NXID formats
31  *
32  * See application note AN3638 for details.
33  */
34 static struct __attribute__ ((__packed__)) eeprom {
35 #ifdef CONFIG_SYS_I2C_EEPROM_CCID
36 	u8 id[4];         /* 0x00 - 0x03 EEPROM Tag 'CCID' */
37 	u8 major;         /* 0x04        Board revision, major */
38 	u8 minor;         /* 0x05        Board revision, minor */
39 	u8 sn[10];        /* 0x06 - 0x0F Serial Number*/
40 	u8 errata[2];     /* 0x10 - 0x11 Errata Level */
41 	u8 date[6];       /* 0x12 - 0x17 Build Date */
42 	u8 res_0[40];     /* 0x18 - 0x3f Reserved */
43 	u8 mac_count;     /* 0x40        Number of MAC addresses */
44 	u8 mac_flag;      /* 0x41        MAC table flags */
45 	u8 mac[MAX_NUM_PORTS][6];     /* 0x42 - 0x71 MAC addresses */
46 	u32 crc;          /* 0x72        CRC32 checksum */
47 #endif
48 #ifdef CONFIG_SYS_I2C_EEPROM_NXID
49 	u8 id[4];         /* 0x00 - 0x03 EEPROM Tag 'NXID' */
50 	u8 sn[12];        /* 0x04 - 0x0F Serial Number */
51 	u8 errata[5];     /* 0x10 - 0x14 Errata Level */
52 	u8 date[6];       /* 0x15 - 0x1a Build Date */
53 	u8 res_0;         /* 0x1b        Reserved */
54 	u32 version;      /* 0x1c - 0x1f NXID Version */
55 	u8 tempcal[8];    /* 0x20 - 0x27 Temperature Calibration Factors */
56 	u8 tempcalsys[2]; /* 0x28 - 0x29 System Temperature Calibration Factors */
57 	u8 tempcalflags;  /* 0x2a        Temperature Calibration Flags */
58 	u8 res_1[21];     /* 0x2b - 0x3f Reserved */
59 	u8 mac_count;     /* 0x40        Number of MAC addresses */
60 	u8 mac_flag;      /* 0x41        MAC table flags */
61 	u8 mac[MAX_NUM_PORTS][6];     /* 0x42 - 0xa1 MAC addresses */
62 	u8 res_2[90];     /* 0xa2 - 0xfb Reserved */
63 	u32 crc;          /* 0xfc - 0xff CRC32 checksum */
64 #endif
65 } e;
66 
67 /* Set to 1 if we've read EEPROM into memory */
68 static int has_been_read = 0;
69 
70 #ifdef CONFIG_SYS_I2C_EEPROM_NXID
71 /* Is this a valid NXID EEPROM? */
72 #define is_valid ((e.id[0] == 'N') || (e.id[1] == 'X') || \
73 		  (e.id[2] == 'I') || (e.id[3] == 'D'))
74 #endif
75 
76 #ifdef CONFIG_SYS_I2C_EEPROM_CCID
77 /* Is this a valid CCID EEPROM? */
78 #define is_valid ((e.id[0] == 'C') || (e.id[1] == 'C') || \
79 		  (e.id[2] == 'I') || (e.id[3] == 'D'))
80 #endif
81 
82 /**
83  * show_eeprom - display the contents of the EEPROM
84  */
85 static void show_eeprom(void)
86 {
87 	int i;
88 	unsigned int crc;
89 
90 	/* EEPROM tag ID, either CCID or NXID */
91 #ifdef CONFIG_SYS_I2C_EEPROM_NXID
92 	printf("ID: %c%c%c%c v%u\n", e.id[0], e.id[1], e.id[2], e.id[3],
93 	       be32_to_cpu(e.version));
94 #else
95 	printf("ID: %c%c%c%c\n", e.id[0], e.id[1], e.id[2], e.id[3]);
96 #endif
97 
98 	/* Serial number */
99 	printf("SN: %s\n", e.sn);
100 
101 	/* Errata level. */
102 #ifdef CONFIG_SYS_I2C_EEPROM_NXID
103 	printf("Errata: %s\n", e.errata);
104 #else
105 	printf("Errata: %c%c\n",
106 		e.errata[0] ? e.errata[0] : '.',
107 		e.errata[1] ? e.errata[1] : '.');
108 #endif
109 
110 	/* Build date, BCD date values, as YYMMDDhhmmss */
111 	printf("Build date: 20%02x/%02x/%02x %02x:%02x:%02x %s\n",
112 		e.date[0], e.date[1], e.date[2],
113 		e.date[3] & 0x7F, e.date[4], e.date[5],
114 		e.date[3] & 0x80 ? "PM" : "");
115 
116 	/* Show MAC addresses  */
117 	for (i = 0; i < min(e.mac_count, (u8)MAX_NUM_PORTS); i++) {
118 
119 		u8 *p = e.mac[i];
120 
121 		printf("Eth%u: %02x:%02x:%02x:%02x:%02x:%02x\n", i,
122 			p[0], p[1], p[2], p[3],	p[4], p[5]);
123 	}
124 
125 	crc = crc32(0, (void *)&e, sizeof(e) - 4);
126 
127 	if (crc == be32_to_cpu(e.crc))
128 		printf("CRC: %08x\n", be32_to_cpu(e.crc));
129 	else
130 		printf("CRC: %08x (should be %08x)\n",
131 			be32_to_cpu(e.crc), crc);
132 
133 #ifdef DEBUG
134 	printf("EEPROM dump: (0x%x bytes)\n", sizeof(e));
135 	for (i = 0; i < sizeof(e); i++) {
136 		if ((i % 16) == 0)
137 			printf("%02X: ", i);
138 		printf("%02X ", ((u8 *)&e)[i]);
139 		if (((i % 16) == 15) || (i == sizeof(e) - 1))
140 			printf("\n");
141 	}
142 #endif
143 }
144 
145 /**
146  * read_eeprom - read the EEPROM into memory
147  */
148 static int read_eeprom(void)
149 {
150 	int ret;
151 #ifdef CONFIG_SYS_EEPROM_BUS_NUM
152 	unsigned int bus;
153 #endif
154 
155 	if (has_been_read)
156 		return 0;
157 
158 #ifdef CONFIG_SYS_EEPROM_BUS_NUM
159 	bus = i2c_get_bus_num();
160 	i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM);
161 #endif
162 
163 	ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
164 		(void *)&e, sizeof(e));
165 
166 #ifdef CONFIG_SYS_EEPROM_BUS_NUM
167 	i2c_set_bus_num(bus);
168 #endif
169 
170 #ifdef DEBUG
171 	show_eeprom();
172 #endif
173 
174 	has_been_read = (ret == 0) ? 1 : 0;
175 
176 	return ret;
177 }
178 
179 /**
180  *  update_crc - update the CRC
181  *
182  *  This function should be called after each update to the EEPROM structure,
183  *  to make sure the CRC is always correct.
184  */
185 static void update_crc(void)
186 {
187 	u32 crc;
188 
189 	crc = crc32(0, (void *)&e, sizeof(e) - 4);
190 	e.crc = cpu_to_be32(crc);
191 }
192 
193 /**
194  * prog_eeprom - write the EEPROM from memory
195  */
196 static int prog_eeprom(void)
197 {
198 	int ret = 0;
199 	int i;
200 	void *p;
201 #ifdef CONFIG_SYS_EEPROM_BUS_NUM
202 	unsigned int bus;
203 #endif
204 
205 	/* Set the reserved values to 0xFF   */
206 #ifdef CONFIG_SYS_I2C_EEPROM_NXID
207 	e.res_0 = 0xFF;
208 	memset(e.res_1, 0xFF, sizeof(e.res_1));
209 #else
210 	memset(e.res_0, 0xFF, sizeof(e.res_0));
211 #endif
212 	update_crc();
213 
214 #ifdef CONFIG_SYS_EEPROM_BUS_NUM
215 	bus = i2c_get_bus_num();
216 	i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM);
217 #endif
218 
219 	/*
220 	 * The AT24C02 datasheet says that data can only be written in page
221 	 * mode, which means 8 bytes at a time, and it takes up to 5ms to
222 	 * complete a given write.
223 	 */
224 	for (i = 0, p = &e; i < sizeof(e); i += 8, p += 8) {
225 		ret = i2c_write(CONFIG_SYS_I2C_EEPROM_ADDR, i, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
226 				p, min((int)(sizeof(e) - i), 8));
227 		if (ret)
228 			break;
229 		udelay(5000);	/* 5ms write cycle timing */
230 	}
231 
232 	if (!ret) {
233 		/* Verify the write by reading back the EEPROM and comparing */
234 		struct eeprom e2;
235 
236 		ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0,
237 			CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (void *)&e2, sizeof(e2));
238 		if (!ret && memcmp(&e, &e2, sizeof(e)))
239 			ret = -1;
240 	}
241 
242 #ifdef CONFIG_SYS_EEPROM_BUS_NUM
243 	i2c_set_bus_num(bus);
244 #endif
245 
246 	if (ret) {
247 		printf("Programming failed.\n");
248 		has_been_read = 0;
249 		return -1;
250 	}
251 
252 	printf("Programming passed.\n");
253 	return 0;
254 }
255 
256 /**
257  * h2i - converts hex character into a number
258  *
259  * This function takes a hexadecimal character (e.g. '7' or 'C') and returns
260  * the integer equivalent.
261  */
262 static inline u8 h2i(char p)
263 {
264 	if ((p >= '0') && (p <= '9'))
265 		return p - '0';
266 
267 	if ((p >= 'A') && (p <= 'F'))
268 		return (p - 'A') + 10;
269 
270 	if ((p >= 'a') && (p <= 'f'))
271 		return (p - 'a') + 10;
272 
273 	return 0;
274 }
275 
276 /**
277  * set_date - stores the build date into the EEPROM
278  *
279  * This function takes a pointer to a string in the format "YYMMDDhhmmss"
280  * (2-digit year, 2-digit month, etc), converts it to a 6-byte BCD string,
281  * and stores it in the build date field of the EEPROM local copy.
282  */
283 static void set_date(const char *string)
284 {
285 	unsigned int i;
286 
287 	if (strlen(string) != 12) {
288 		printf("Usage: mac date YYMMDDhhmmss\n");
289 		return;
290 	}
291 
292 	for (i = 0; i < 6; i++)
293 		e.date[i] = h2i(string[2 * i]) << 4 | h2i(string[2 * i + 1]);
294 
295 	update_crc();
296 }
297 
298 /**
299  * set_mac_address - stores a MAC address into the EEPROM
300  *
301  * This function takes a pointer to MAC address string
302  * (i.e."XX:XX:XX:XX:XX:XX", where "XX" is a two-digit hex number) and
303  * stores it in one of the MAC address fields of the EEPROM local copy.
304  */
305 static void set_mac_address(unsigned int index, const char *string)
306 {
307 	char *p = (char *) string;
308 	unsigned int i;
309 
310 	if ((index >= MAX_NUM_PORTS) || !string) {
311 		printf("Usage: mac <n> XX:XX:XX:XX:XX:XX\n");
312 		return;
313 	}
314 
315 	for (i = 0; *p && (i < 6); i++) {
316 		e.mac[index][i] = simple_strtoul(p, &p, 16);
317 		if (*p == ':')
318 			p++;
319 	}
320 
321 	update_crc();
322 }
323 
324 int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
325 {
326 	char cmd;
327 
328 	if (argc == 1) {
329 		show_eeprom();
330 		return 0;
331 	}
332 
333 	cmd = argv[1][0];
334 
335 	if (cmd == 'r') {
336 		read_eeprom();
337 		return 0;
338 	}
339 
340 	if (cmd == 'i') {
341 #ifdef CONFIG_SYS_I2C_EEPROM_NXID
342 		memcpy(e.id, "NXID", sizeof(e.id));
343 		e.version = cpu_to_be32(NXID_VERSION);
344 #else
345 		memcpy(e.id, "CCID", sizeof(e.id));
346 #endif
347 		update_crc();
348 		return 0;
349 	}
350 
351 	if (!is_valid) {
352 		printf("Please read the EEPROM ('r') and/or set the ID ('i') first.\n");
353 		return 0;
354 	}
355 
356 	if (argc == 2) {
357 		switch (cmd) {
358 		case 's':	/* save */
359 			prog_eeprom();
360 			break;
361 		default:
362 			return cmd_usage(cmdtp);
363 		}
364 
365 		return 0;
366 	}
367 
368 	/* We know we have at least one parameter  */
369 
370 	switch (cmd) {
371 	case 'n':	/* serial number */
372 		memset(e.sn, 0, sizeof(e.sn));
373 		strncpy((char *)e.sn, argv[2], sizeof(e.sn) - 1);
374 		update_crc();
375 		break;
376 	case 'e':	/* errata */
377 #ifdef CONFIG_SYS_I2C_EEPROM_NXID
378 		memset(e.errata, 0, 5);
379 		strncpy((char *)e.errata, argv[2], 4);
380 #else
381 		e.errata[0] = argv[2][0];
382 		e.errata[1] = argv[2][1];
383 #endif
384 		update_crc();
385 		break;
386 	case 'd':	/* date BCD format YYMMDDhhmmss */
387 		set_date(argv[2]);
388 		break;
389 	case 'p':	/* MAC table size */
390 		e.mac_count = simple_strtoul(argv[2], NULL, 16);
391 		update_crc();
392 		break;
393 	case '0' ... '9':	/* "mac 0" through "mac 22" */
394 		set_mac_address(simple_strtoul(argv[1], NULL, 10), argv[2]);
395 		break;
396 	case 'h':	/* help */
397 	default:
398 		return cmd_usage(cmdtp);
399 	}
400 
401 	return 0;
402 }
403 
404 /**
405  * mac_read_from_eeprom - read the MAC addresses from EEPROM
406  *
407  * This function reads the MAC addresses from EEPROM and sets the
408  * appropriate environment variables for each one read.
409  *
410  * The environment variables are only set if they haven't been set already.
411  * This ensures that any user-saved variables are never overwritten.
412  *
413  * This function must be called after relocation.
414  *
415  * For NXID v1 EEPROMs, we support loading and up-converting the older NXID v0
416  * format.  In a v0 EEPROM, there are only eight MAC addresses and the CRC is
417  * located at a different offset.
418  */
419 int mac_read_from_eeprom(void)
420 {
421 	unsigned int i;
422 	u32 crc, crc_offset = offsetof(struct eeprom, crc);
423 	u32 *crcp; /* Pointer to the CRC in the data read from the EEPROM */
424 
425 	puts("EEPROM: ");
426 
427 	if (read_eeprom()) {
428 		printf("Read failed.\n");
429 		return 0;
430 	}
431 
432 	if (!is_valid) {
433 		printf("Invalid ID (%02x %02x %02x %02x)\n",
434 		       e.id[0], e.id[1], e.id[2], e.id[3]);
435 		return 0;
436 	}
437 
438 #ifdef CONFIG_SYS_I2C_EEPROM_NXID
439 	/*
440 	 * If we've read an NXID v0 EEPROM, then we need to set the CRC offset
441 	 * to where it is in v0.
442 	 */
443 	if (e.version == 0)
444 		crc_offset = 0x72;
445 #endif
446 
447 	crc = crc32(0, (void *)&e, crc_offset);
448 	crcp = (void *)&e + crc_offset;
449 	if (crc != be32_to_cpu(*crcp)) {
450 		printf("CRC mismatch (%08x != %08x)\n", crc, be32_to_cpu(e.crc));
451 		return 0;
452 	}
453 
454 #ifdef CONFIG_SYS_I2C_EEPROM_NXID
455 	/*
456 	 * MAC address #9 in v1 occupies the same position as the CRC in v0.
457 	 * Erase it so that it's not mistaken for a MAC address.  We'll
458 	 * update the CRC later.
459 	 */
460 	if (e.version == 0)
461 		memset(e.mac[8], 0xff, 6);
462 #endif
463 
464 	for (i = 0; i < min(e.mac_count, (u8)MAX_NUM_PORTS); i++) {
465 		if (memcmp(&e.mac[i], "\0\0\0\0\0\0", 6) &&
466 		    memcmp(&e.mac[i], "\xFF\xFF\xFF\xFF\xFF\xFF", 6)) {
467 			char ethaddr[18];
468 			char enetvar[9];
469 
470 			sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
471 				e.mac[i][0],
472 				e.mac[i][1],
473 				e.mac[i][2],
474 				e.mac[i][3],
475 				e.mac[i][4],
476 				e.mac[i][5]);
477 			sprintf(enetvar, i ? "eth%daddr" : "ethaddr", i);
478 			/* Only initialize environment variables that are blank
479 			 * (i.e. have not yet been set)
480 			 */
481 			if (!getenv(enetvar))
482 				setenv(enetvar, ethaddr);
483 		}
484 	}
485 
486 #ifdef CONFIG_SYS_I2C_EEPROM_NXID
487 	printf("%c%c%c%c v%u\n", e.id[0], e.id[1], e.id[2], e.id[3],
488 	       be32_to_cpu(e.version));
489 #else
490 	printf("%c%c%c%c\n", e.id[0], e.id[1], e.id[2], e.id[3]);
491 #endif
492 
493 #ifdef CONFIG_SYS_I2C_EEPROM_NXID
494 	/*
495 	 * Now we need to upconvert the data into v1 format.  We do this last so
496 	 * that at boot time, U-Boot will still say "NXID v0".
497 	 */
498 	if (e.version == 0) {
499 		e.version = cpu_to_be32(NXID_VERSION);
500 		update_crc();
501 	}
502 #endif
503 
504 	return 0;
505 }
506 
507 #ifdef CONFIG_SYS_I2C_EEPROM_CCID
508 
509 /**
510  * get_cpu_board_revision - get the CPU board revision on 85xx boards
511  *
512  * Read the EEPROM to determine the board revision.
513  *
514  * This function is called before relocation, so we need to read a private
515  * copy of the EEPROM into a local variable on the stack.
516  *
517  * Also, we assume that CONFIG_SYS_EEPROM_BUS_NUM == CONFIG_SYS_SPD_BUS_NUM.  The global
518  * variable i2c_bus_num must be compile-time initialized to CONFIG_SYS_SPD_BUS_NUM,
519  * so that the SPD code will work.  This means that all pre-relocation I2C
520  * operations can only occur on the CONFIG_SYS_SPD_BUS_NUM bus.  So if
521  * CONFIG_SYS_EEPROM_BUS_NUM != CONFIG_SYS_SPD_BUS_NUM, then we can't read the EEPROM when
522  * this function is called.  Oh well.
523  */
524 unsigned int get_cpu_board_revision(void)
525 {
526 	struct board_eeprom {
527 		u32 id;           /* 0x00 - 0x03 EEPROM Tag 'CCID' */
528 		u8 major;         /* 0x04        Board revision, major */
529 		u8 minor;         /* 0x05        Board revision, minor */
530 	} be;
531 
532 	i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
533 		(void *)&be, sizeof(be));
534 
535 	if (be.id != (('C' << 24) | ('C' << 16) | ('I' << 8) | 'D'))
536 		return MPC85XX_CPU_BOARD_REV(0, 0);
537 
538 	if ((be.major == 0xff) && (be.minor == 0xff))
539 		return MPC85XX_CPU_BOARD_REV(0, 0);
540 
541 	return MPC85XX_CPU_BOARD_REV(be.major, be.minor);
542 }
543 #endif
544