1 /* 2 * Copyright 2006, 2008-2009, 2011 Freescale Semiconductor 3 * York Sun (yorksun@freescale.com) 4 * Haiying Wang (haiying.wang@freescale.com) 5 * Timur Tabi (timur@freescale.com) 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #include <common.h> 11 #include <command.h> 12 #include <i2c.h> 13 #include <linux/ctype.h> 14 15 #ifdef CONFIG_SYS_I2C_EEPROM_CCID 16 #include "../common/eeprom.h" 17 #define MAX_NUM_PORTS 8 18 #endif 19 20 #ifdef CONFIG_SYS_I2C_EEPROM_NXID 21 /* some boards with non-256-bytes EEPROM have special define */ 22 /* for MAX_NUM_PORTS in board-specific file */ 23 #ifndef MAX_NUM_PORTS 24 #define MAX_NUM_PORTS 16 25 #endif 26 #define NXID_VERSION 1 27 #endif 28 29 /** 30 * static eeprom: EEPROM layout for CCID or NXID formats 31 * 32 * See application note AN3638 for details. 33 */ 34 static struct __attribute__ ((__packed__)) eeprom { 35 #ifdef CONFIG_SYS_I2C_EEPROM_CCID 36 u8 id[4]; /* 0x00 - 0x03 EEPROM Tag 'CCID' */ 37 u8 major; /* 0x04 Board revision, major */ 38 u8 minor; /* 0x05 Board revision, minor */ 39 u8 sn[10]; /* 0x06 - 0x0F Serial Number*/ 40 u8 errata[2]; /* 0x10 - 0x11 Errata Level */ 41 u8 date[6]; /* 0x12 - 0x17 Build Date */ 42 u8 res_0[40]; /* 0x18 - 0x3f Reserved */ 43 u8 mac_count; /* 0x40 Number of MAC addresses */ 44 u8 mac_flag; /* 0x41 MAC table flags */ 45 u8 mac[MAX_NUM_PORTS][6]; /* 0x42 - 0x71 MAC addresses */ 46 u32 crc; /* 0x72 CRC32 checksum */ 47 #endif 48 #ifdef CONFIG_SYS_I2C_EEPROM_NXID 49 u8 id[4]; /* 0x00 - 0x03 EEPROM Tag 'NXID' */ 50 u8 sn[12]; /* 0x04 - 0x0F Serial Number */ 51 u8 errata[5]; /* 0x10 - 0x14 Errata Level */ 52 u8 date[6]; /* 0x15 - 0x1a Build Date */ 53 u8 res_0; /* 0x1b Reserved */ 54 u32 version; /* 0x1c - 0x1f NXID Version */ 55 u8 tempcal[8]; /* 0x20 - 0x27 Temperature Calibration Factors */ 56 u8 tempcalsys[2]; /* 0x28 - 0x29 System Temperature Calibration Factors */ 57 u8 tempcalflags; /* 0x2a Temperature Calibration Flags */ 58 u8 res_1[21]; /* 0x2b - 0x3f Reserved */ 59 u8 mac_count; /* 0x40 Number of MAC addresses */ 60 u8 mac_flag; /* 0x41 MAC table flags */ 61 u8 mac[MAX_NUM_PORTS][6]; /* 0x42 - 0xa1 MAC addresses */ 62 u8 res_2[90]; /* 0xa2 - 0xfb Reserved */ 63 u32 crc; /* 0xfc - 0xff CRC32 checksum */ 64 #endif 65 } e; 66 67 /* Set to 1 if we've read EEPROM into memory */ 68 static int has_been_read = 0; 69 70 #ifdef CONFIG_SYS_I2C_EEPROM_NXID 71 /* Is this a valid NXID EEPROM? */ 72 #define is_valid ((e.id[0] == 'N') || (e.id[1] == 'X') || \ 73 (e.id[2] == 'I') || (e.id[3] == 'D')) 74 #endif 75 76 #ifdef CONFIG_SYS_I2C_EEPROM_CCID 77 /* Is this a valid CCID EEPROM? */ 78 #define is_valid ((e.id[0] == 'C') || (e.id[1] == 'C') || \ 79 (e.id[2] == 'I') || (e.id[3] == 'D')) 80 #endif 81 82 /** 83 * show_eeprom - display the contents of the EEPROM 84 */ 85 static void show_eeprom(void) 86 { 87 int i; 88 unsigned int crc; 89 90 /* EEPROM tag ID, either CCID or NXID */ 91 #ifdef CONFIG_SYS_I2C_EEPROM_NXID 92 printf("ID: %c%c%c%c v%u\n", e.id[0], e.id[1], e.id[2], e.id[3], 93 be32_to_cpu(e.version)); 94 #else 95 printf("ID: %c%c%c%c\n", e.id[0], e.id[1], e.id[2], e.id[3]); 96 #endif 97 98 /* Serial number */ 99 printf("SN: %s\n", e.sn); 100 101 /* Errata level. */ 102 #ifdef CONFIG_SYS_I2C_EEPROM_NXID 103 printf("Errata: %s\n", e.errata); 104 #else 105 printf("Errata: %c%c\n", 106 e.errata[0] ? e.errata[0] : '.', 107 e.errata[1] ? e.errata[1] : '.'); 108 #endif 109 110 /* Build date, BCD date values, as YYMMDDhhmmss */ 111 printf("Build date: 20%02x/%02x/%02x %02x:%02x:%02x %s\n", 112 e.date[0], e.date[1], e.date[2], 113 e.date[3] & 0x7F, e.date[4], e.date[5], 114 e.date[3] & 0x80 ? "PM" : ""); 115 116 /* Show MAC addresses */ 117 for (i = 0; i < min(e.mac_count, (u8)MAX_NUM_PORTS); i++) { 118 119 u8 *p = e.mac[i]; 120 121 printf("Eth%u: %02x:%02x:%02x:%02x:%02x:%02x\n", i, 122 p[0], p[1], p[2], p[3], p[4], p[5]); 123 } 124 125 crc = crc32(0, (void *)&e, sizeof(e) - 4); 126 127 if (crc == be32_to_cpu(e.crc)) 128 printf("CRC: %08x\n", be32_to_cpu(e.crc)); 129 else 130 printf("CRC: %08x (should be %08x)\n", 131 be32_to_cpu(e.crc), crc); 132 133 #ifdef DEBUG 134 printf("EEPROM dump: (0x%x bytes)\n", sizeof(e)); 135 for (i = 0; i < sizeof(e); i++) { 136 if ((i % 16) == 0) 137 printf("%02X: ", i); 138 printf("%02X ", ((u8 *)&e)[i]); 139 if (((i % 16) == 15) || (i == sizeof(e) - 1)) 140 printf("\n"); 141 } 142 #endif 143 } 144 145 /** 146 * read_eeprom - read the EEPROM into memory 147 */ 148 static int read_eeprom(void) 149 { 150 int ret; 151 #ifdef CONFIG_SYS_EEPROM_BUS_NUM 152 unsigned int bus; 153 #endif 154 155 if (has_been_read) 156 return 0; 157 158 #ifdef CONFIG_SYS_EEPROM_BUS_NUM 159 bus = i2c_get_bus_num(); 160 i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM); 161 #endif 162 163 ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, CONFIG_SYS_I2C_EEPROM_ADDR_LEN, 164 (void *)&e, sizeof(e)); 165 166 #ifdef CONFIG_SYS_EEPROM_BUS_NUM 167 i2c_set_bus_num(bus); 168 #endif 169 170 #ifdef DEBUG 171 show_eeprom(); 172 #endif 173 174 has_been_read = (ret == 0) ? 1 : 0; 175 176 return ret; 177 } 178 179 /** 180 * update_crc - update the CRC 181 * 182 * This function should be called after each update to the EEPROM structure, 183 * to make sure the CRC is always correct. 184 */ 185 static void update_crc(void) 186 { 187 u32 crc; 188 189 crc = crc32(0, (void *)&e, sizeof(e) - 4); 190 e.crc = cpu_to_be32(crc); 191 } 192 193 /** 194 * prog_eeprom - write the EEPROM from memory 195 */ 196 static int prog_eeprom(void) 197 { 198 int ret = 0; 199 int i; 200 void *p; 201 #ifdef CONFIG_SYS_EEPROM_BUS_NUM 202 unsigned int bus; 203 #endif 204 205 /* Set the reserved values to 0xFF */ 206 #ifdef CONFIG_SYS_I2C_EEPROM_NXID 207 e.res_0 = 0xFF; 208 memset(e.res_1, 0xFF, sizeof(e.res_1)); 209 #else 210 memset(e.res_0, 0xFF, sizeof(e.res_0)); 211 #endif 212 update_crc(); 213 214 #ifdef CONFIG_SYS_EEPROM_BUS_NUM 215 bus = i2c_get_bus_num(); 216 i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM); 217 #endif 218 219 /* 220 * The AT24C02 datasheet says that data can only be written in page 221 * mode, which means 8 bytes at a time, and it takes up to 5ms to 222 * complete a given write. 223 */ 224 for (i = 0, p = &e; i < sizeof(e); i += 8, p += 8) { 225 ret = i2c_write(CONFIG_SYS_I2C_EEPROM_ADDR, i, CONFIG_SYS_I2C_EEPROM_ADDR_LEN, 226 p, min((int)(sizeof(e) - i), 8)); 227 if (ret) 228 break; 229 udelay(5000); /* 5ms write cycle timing */ 230 } 231 232 if (!ret) { 233 /* Verify the write by reading back the EEPROM and comparing */ 234 struct eeprom e2; 235 236 ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 237 CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (void *)&e2, sizeof(e2)); 238 if (!ret && memcmp(&e, &e2, sizeof(e))) 239 ret = -1; 240 } 241 242 #ifdef CONFIG_SYS_EEPROM_BUS_NUM 243 i2c_set_bus_num(bus); 244 #endif 245 246 if (ret) { 247 printf("Programming failed.\n"); 248 has_been_read = 0; 249 return -1; 250 } 251 252 printf("Programming passed.\n"); 253 return 0; 254 } 255 256 /** 257 * h2i - converts hex character into a number 258 * 259 * This function takes a hexadecimal character (e.g. '7' or 'C') and returns 260 * the integer equivalent. 261 */ 262 static inline u8 h2i(char p) 263 { 264 if ((p >= '0') && (p <= '9')) 265 return p - '0'; 266 267 if ((p >= 'A') && (p <= 'F')) 268 return (p - 'A') + 10; 269 270 if ((p >= 'a') && (p <= 'f')) 271 return (p - 'a') + 10; 272 273 return 0; 274 } 275 276 /** 277 * set_date - stores the build date into the EEPROM 278 * 279 * This function takes a pointer to a string in the format "YYMMDDhhmmss" 280 * (2-digit year, 2-digit month, etc), converts it to a 6-byte BCD string, 281 * and stores it in the build date field of the EEPROM local copy. 282 */ 283 static void set_date(const char *string) 284 { 285 unsigned int i; 286 287 if (strlen(string) != 12) { 288 printf("Usage: mac date YYMMDDhhmmss\n"); 289 return; 290 } 291 292 for (i = 0; i < 6; i++) 293 e.date[i] = h2i(string[2 * i]) << 4 | h2i(string[2 * i + 1]); 294 295 update_crc(); 296 } 297 298 /** 299 * set_mac_address - stores a MAC address into the EEPROM 300 * 301 * This function takes a pointer to MAC address string 302 * (i.e."XX:XX:XX:XX:XX:XX", where "XX" is a two-digit hex number) and 303 * stores it in one of the MAC address fields of the EEPROM local copy. 304 */ 305 static void set_mac_address(unsigned int index, const char *string) 306 { 307 char *p = (char *) string; 308 unsigned int i; 309 310 if ((index >= MAX_NUM_PORTS) || !string) { 311 printf("Usage: mac <n> XX:XX:XX:XX:XX:XX\n"); 312 return; 313 } 314 315 for (i = 0; *p && (i < 6); i++) { 316 e.mac[index][i] = simple_strtoul(p, &p, 16); 317 if (*p == ':') 318 p++; 319 } 320 321 update_crc(); 322 } 323 324 int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) 325 { 326 char cmd; 327 328 if (argc == 1) { 329 show_eeprom(); 330 return 0; 331 } 332 333 cmd = argv[1][0]; 334 335 if (cmd == 'r') { 336 read_eeprom(); 337 return 0; 338 } 339 340 if (cmd == 'i') { 341 #ifdef CONFIG_SYS_I2C_EEPROM_NXID 342 memcpy(e.id, "NXID", sizeof(e.id)); 343 e.version = cpu_to_be32(NXID_VERSION); 344 #else 345 memcpy(e.id, "CCID", sizeof(e.id)); 346 #endif 347 update_crc(); 348 return 0; 349 } 350 351 if (!is_valid) { 352 printf("Please read the EEPROM ('r') and/or set the ID ('i') first.\n"); 353 return 0; 354 } 355 356 if (argc == 2) { 357 switch (cmd) { 358 case 's': /* save */ 359 prog_eeprom(); 360 break; 361 default: 362 return cmd_usage(cmdtp); 363 } 364 365 return 0; 366 } 367 368 /* We know we have at least one parameter */ 369 370 switch (cmd) { 371 case 'n': /* serial number */ 372 memset(e.sn, 0, sizeof(e.sn)); 373 strncpy((char *)e.sn, argv[2], sizeof(e.sn) - 1); 374 update_crc(); 375 break; 376 case 'e': /* errata */ 377 #ifdef CONFIG_SYS_I2C_EEPROM_NXID 378 memset(e.errata, 0, 5); 379 strncpy((char *)e.errata, argv[2], 4); 380 #else 381 e.errata[0] = argv[2][0]; 382 e.errata[1] = argv[2][1]; 383 #endif 384 update_crc(); 385 break; 386 case 'd': /* date BCD format YYMMDDhhmmss */ 387 set_date(argv[2]); 388 break; 389 case 'p': /* MAC table size */ 390 e.mac_count = simple_strtoul(argv[2], NULL, 16); 391 update_crc(); 392 break; 393 case '0' ... '9': /* "mac 0" through "mac 22" */ 394 set_mac_address(simple_strtoul(argv[1], NULL, 10), argv[2]); 395 break; 396 case 'h': /* help */ 397 default: 398 return cmd_usage(cmdtp); 399 } 400 401 return 0; 402 } 403 404 /** 405 * mac_read_from_eeprom - read the MAC addresses from EEPROM 406 * 407 * This function reads the MAC addresses from EEPROM and sets the 408 * appropriate environment variables for each one read. 409 * 410 * The environment variables are only set if they haven't been set already. 411 * This ensures that any user-saved variables are never overwritten. 412 * 413 * This function must be called after relocation. 414 * 415 * For NXID v1 EEPROMs, we support loading and up-converting the older NXID v0 416 * format. In a v0 EEPROM, there are only eight MAC addresses and the CRC is 417 * located at a different offset. 418 */ 419 int mac_read_from_eeprom(void) 420 { 421 unsigned int i; 422 u32 crc, crc_offset = offsetof(struct eeprom, crc); 423 u32 *crcp; /* Pointer to the CRC in the data read from the EEPROM */ 424 425 puts("EEPROM: "); 426 427 if (read_eeprom()) { 428 printf("Read failed.\n"); 429 return 0; 430 } 431 432 if (!is_valid) { 433 printf("Invalid ID (%02x %02x %02x %02x)\n", 434 e.id[0], e.id[1], e.id[2], e.id[3]); 435 return 0; 436 } 437 438 #ifdef CONFIG_SYS_I2C_EEPROM_NXID 439 /* 440 * If we've read an NXID v0 EEPROM, then we need to set the CRC offset 441 * to where it is in v0. 442 */ 443 if (e.version == 0) 444 crc_offset = 0x72; 445 #endif 446 447 crc = crc32(0, (void *)&e, crc_offset); 448 crcp = (void *)&e + crc_offset; 449 if (crc != be32_to_cpu(*crcp)) { 450 printf("CRC mismatch (%08x != %08x)\n", crc, be32_to_cpu(e.crc)); 451 return 0; 452 } 453 454 #ifdef CONFIG_SYS_I2C_EEPROM_NXID 455 /* 456 * MAC address #9 in v1 occupies the same position as the CRC in v0. 457 * Erase it so that it's not mistaken for a MAC address. We'll 458 * update the CRC later. 459 */ 460 if (e.version == 0) 461 memset(e.mac[8], 0xff, 6); 462 #endif 463 464 for (i = 0; i < min(e.mac_count, (u8)MAX_NUM_PORTS); i++) { 465 if (memcmp(&e.mac[i], "\0\0\0\0\0\0", 6) && 466 memcmp(&e.mac[i], "\xFF\xFF\xFF\xFF\xFF\xFF", 6)) { 467 char ethaddr[18]; 468 char enetvar[9]; 469 470 sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X", 471 e.mac[i][0], 472 e.mac[i][1], 473 e.mac[i][2], 474 e.mac[i][3], 475 e.mac[i][4], 476 e.mac[i][5]); 477 sprintf(enetvar, i ? "eth%daddr" : "ethaddr", i); 478 /* Only initialize environment variables that are blank 479 * (i.e. have not yet been set) 480 */ 481 if (!env_get(enetvar)) 482 env_set(enetvar, ethaddr); 483 } 484 } 485 486 #ifdef CONFIG_SYS_I2C_EEPROM_NXID 487 printf("%c%c%c%c v%u\n", e.id[0], e.id[1], e.id[2], e.id[3], 488 be32_to_cpu(e.version)); 489 #else 490 printf("%c%c%c%c\n", e.id[0], e.id[1], e.id[2], e.id[3]); 491 #endif 492 493 #ifdef CONFIG_SYS_I2C_EEPROM_NXID 494 /* 495 * Now we need to upconvert the data into v1 format. We do this last so 496 * that at boot time, U-Boot will still say "NXID v0". 497 */ 498 if (e.version == 0) { 499 e.version = cpu_to_be32(NXID_VERSION); 500 update_crc(); 501 } 502 #endif 503 504 return 0; 505 } 506 507 #ifdef CONFIG_SYS_I2C_EEPROM_CCID 508 509 /** 510 * get_cpu_board_revision - get the CPU board revision on 85xx boards 511 * 512 * Read the EEPROM to determine the board revision. 513 * 514 * This function is called before relocation, so we need to read a private 515 * copy of the EEPROM into a local variable on the stack. 516 * 517 * Also, we assume that CONFIG_SYS_EEPROM_BUS_NUM == CONFIG_SYS_SPD_BUS_NUM. The global 518 * variable i2c_bus_num must be compile-time initialized to CONFIG_SYS_SPD_BUS_NUM, 519 * so that the SPD code will work. This means that all pre-relocation I2C 520 * operations can only occur on the CONFIG_SYS_SPD_BUS_NUM bus. So if 521 * CONFIG_SYS_EEPROM_BUS_NUM != CONFIG_SYS_SPD_BUS_NUM, then we can't read the EEPROM when 522 * this function is called. Oh well. 523 */ 524 unsigned int get_cpu_board_revision(void) 525 { 526 struct board_eeprom { 527 u32 id; /* 0x00 - 0x03 EEPROM Tag 'CCID' */ 528 u8 major; /* 0x04 Board revision, major */ 529 u8 minor; /* 0x05 Board revision, minor */ 530 } be; 531 532 i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, CONFIG_SYS_I2C_EEPROM_ADDR_LEN, 533 (void *)&be, sizeof(be)); 534 535 if (be.id != (('C' << 24) | ('C' << 16) | ('I' << 8) | 'D')) 536 return MPC85XX_CPU_BOARD_REV(0, 0); 537 538 if ((be.major == 0xff) && (be.minor == 0xff)) 539 return MPC85XX_CPU_BOARD_REV(0, 0); 540 541 return MPC85XX_CPU_BOARD_REV(be.major, be.minor); 542 } 543 #endif 544