1 /*
2  * Freescale SGMII Riser Card
3  *
4  * This driver supports the SGMII Riser card found on the
5  * "DS" style of development board from Freescale.
6  *
7  * This software may be used and distributed according to the
8  * terms of the GNU Public License, Version 2, incorporated
9  * herein by reference.
10  *
11  * Copyright 2008 Freescale Semiconductor, Inc.
12  *
13  */
14 
15 #include <config.h>
16 #include <common.h>
17 #include <net.h>
18 #include <libfdt.h>
19 #include <tsec.h>
20 #include <fdt_support.h>
21 
22 void fsl_sgmii_riser_init(struct tsec_info_struct *tsec_info, int num)
23 {
24 	int i;
25 
26 	for (i = 0; i < num; i++)
27 		if (tsec_info[i].flags & TSEC_SGMII)
28 			tsec_info[i].phyaddr += SGMII_RISER_PHY_OFFSET;
29 }
30 
31 void fsl_sgmii_riser_fdt_fixup(void *fdt)
32 {
33 	struct eth_device *dev;
34 	int node;
35 	int mdio_node;
36 	int i = -1;
37 	int etsec_num = 0;
38 
39 	node = fdt_path_offset(fdt, "/aliases");
40 	if (node < 0)
41 		return;
42 
43 	while ((dev = eth_get_dev_by_index(++i)) != NULL) {
44 		struct tsec_private *priv;
45 		int phy_node;
46 		int enet_node;
47 		uint32_t ph;
48 		char sgmii_phy[16];
49 		char enet[16];
50 		const u32 *phyh;
51 		const char *model;
52 		const char *path;
53 
54 		if (!strstr(dev->name, "eTSEC"))
55 			continue;
56 
57 		priv = dev->priv;
58 		if (!(priv->flags & TSEC_SGMII)) {
59 			etsec_num++;
60 			continue;
61 		}
62 
63 		mdio_node = fdt_node_offset_by_compatible(fdt, -1,
64 				"fsl,gianfar-mdio");
65 		if (mdio_node < 0)
66 			return;
67 
68 		sprintf(sgmii_phy, "sgmii-phy@%d", etsec_num);
69 		phy_node = fdt_subnode_offset(fdt, mdio_node, sgmii_phy);
70 		if (phy_node > 0) {
71 			fdt_increase_size(fdt, 32);
72 			ph = fdt_create_phandle(fdt, phy_node);
73 			if (!ph)
74 				continue;
75 		}
76 
77 		sprintf(enet, "ethernet%d", etsec_num++);
78 		path = fdt_getprop(fdt, node, enet, NULL);
79 		if (!path) {
80 			debug("No alias for %s\n", enet);
81 			continue;
82 		}
83 
84 		enet_node = fdt_path_offset(fdt, path);
85 		if (enet_node < 0)
86 			continue;
87 
88 		model = fdt_getprop(fdt, enet_node, "model", NULL);
89 
90 		/*
91 		 * We only want to do this to eTSECs.  On some platforms
92 		 * there are more than one type of gianfar-style ethernet
93 		 * controller, and as we are creating an implicit connection
94 		 * between ethernet nodes and eTSEC devices, it is best to
95 		 * make the connection use as much explicit information
96 		 * as exists.
97 		 */
98 		if (!strstr(model, "TSEC"))
99 			continue;
100 
101 		if (phy_node < 0) {
102 			/*
103 			 * This part is only for old device tree without
104 			 * sgmii_phy nodes. It's kept just for compatible
105 			 * reason. Soon to be deprecated if all device tree
106 			 * get updated.
107 			 */
108 			phyh = fdt_getprop(fdt, enet_node, "phy-handle", NULL);
109 			if (!phyh)
110 				continue;
111 
112 			phy_node = fdt_node_offset_by_phandle(fdt,
113 					fdt32_to_cpu(*phyh));
114 
115 			priv = dev->priv;
116 
117 			if (priv->flags & TSEC_SGMII)
118 				fdt_setprop_cell(fdt, phy_node, "reg",
119 						priv->phyaddr);
120 		} else {
121 			fdt_setprop(fdt, enet_node, "phy-handle", &ph,
122 					sizeof(ph));
123 			fdt_setprop_string(fdt, enet_node,
124 					"phy-connection-type",
125 					phy_string_for_interface(
126 						PHY_INTERFACE_MODE_SGMII));
127 		}
128 	}
129 }
130