xref: /openbmc/u-boot/board/freescale/common/qixis.h (revision 699c40e8)
1 /*
2  * Copyright 2011 Freescale Semiconductor
3  * Author: Shengzhou Liu <Shengzhou.Liu@freescale.com>
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms of the GNU General Public License as published by the Free
7  * Software Foundation; either version 2 of the License, or (at your option)
8  * any later version.
9  *
10  * This file provides support for the QIXIS of some Freescale reference boards.
11  */
12 
13 #ifndef __QIXIS_H_
14 #define __QIXIS_H_
15 
16 struct qixis {
17 	u8 id;      /* ID value uniquely identifying each QDS board type */
18 	u8 arch;    /* Board version information */
19 	u8 scver;   /* QIXIS Version Register */
20 	u8 model;   /* Information of software programming model version */
21 	u8 tagdata;
22 	u8 ctl_sys;
23 	u8 aux;         /* Auxiliary Register,0x06 */
24 	u8 clk_spd;
25 	u8 stat_dut;
26 	u8 stat_sys;
27 	u8 stat_alrm;
28 	u8 present;
29 	u8 present2;    /* Presence Status Register 2,0x0c */
30 	u8 rcw_ctl;
31 	u8 ctl_led;
32 	u8 i2cblk;
33 	u8 rcfg_ctl;    /* Reconfig Control Register,0x10 */
34 	u8 rcfg_st;
35 	u8 dcm_ad;
36 	u8 dcm_da;
37 	u8 dcmd;
38 	u8 dmsg;
39 	u8 gdc;
40 	u8 gdd;         /* DCM Debug Data Register,0x17 */
41 	u8 dmack;
42 	u8 res1[6];
43 	u8 watch;       /* Watchdog Register,0x1F */
44 	u8 pwr_ctl[2];  /* Power Control Register,0x20 */
45 	u8 res2[2];
46 	u8 pwr_stat[4]; /* Power Status Register,0x24 */
47 	u8 res3[8];
48 	u8 clk_spd2[2];  /* SYSCLK clock Speed Register,0x30 */
49 	u8 res4[2];
50 	u8 sclk[3];  /* Clock Configuration Registers,0x34 */
51 	u8 res5;
52 	u8 dclk[3];
53 	u8 res6;
54 	u8 clk_dspd[3];
55 	u8 res7;
56 	u8 rst_ctl;     /* Reset Control Register,0x40 */
57 	u8 rst_stat;    /* Reset Status Register */
58 	u8 rst_rsn;     /* Reset Reason Register */
59 	u8 rst_frc[2];  /* Reset Force Registers,0x43 */
60 	u8 res8[11];
61 	u8 brdcfg[16];  /* Board Configuration Register,0x50 */
62 	u8 dutcfg[16];
63 	u8 rcw_ad[2];   /* RCW SRAM Address Registers,0x70 */
64 	u8 rcw_data;
65 	u8 res9[5];
66 	u8 post_ctl;
67 	u8 post_stat;
68 	u8 post_dat[2];
69 	u8 pi_d[4];
70 	u8 gpio_io[4];
71 	u8 gpio_dir[4];
72 	u8 res10[20];
73 	u8 rjtag_ctl;
74 	u8 rjtag_dat;
75 	u8 res11[2];
76 	u8 trig_src[4];
77 	u8 trig_dst[4];
78 	u8 trig_stat;
79 	u8 res12[3];
80 	u8 trig_ctr[4];
81 	u8 res13[48];
82 	u8 aux2[4];	/* Auxiliary Registers,0xE0 */
83 	u8 res14[10];
84 	u8 aux_ad;
85 	u8 aux_da;
86 	u8 res15[16];
87 };
88 
89 u8 qixis_read(unsigned int reg);
90 void qixis_write(unsigned int reg, u8 value);
91 
92 #define QIXIS_READ(reg) qixis_read(offsetof(struct qixis, reg))
93 #define QIXIS_WRITE(reg, value) qixis_write(offsetof(struct qixis, reg), value)
94 
95 #endif
96