1 /* 2 * Copyright 2014 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #include <common.h> 8 #include <errno.h> 9 #include <power/pmic.h> 10 #include <power/pfuze100_pmic.h> 11 12 #ifndef CONFIG_DM_PMIC_PFUZE100 13 int pfuze_mode_init(struct pmic *p, u32 mode) 14 { 15 unsigned char offset, i, switch_num; 16 u32 id, ret; 17 18 pmic_reg_read(p, PFUZE100_DEVICEID, &id); 19 id = id & 0xf; 20 21 if (id == 0) { 22 switch_num = 6; 23 offset = PFUZE100_SW1CMODE; 24 } else if (id == 1) { 25 switch_num = 4; 26 offset = PFUZE100_SW2MODE; 27 } else { 28 printf("Not supported, id=%d\n", id); 29 return -EINVAL; 30 } 31 32 ret = pmic_reg_write(p, PFUZE100_SW1ABMODE, mode); 33 if (ret < 0) { 34 printf("Set SW1AB mode error!\n"); 35 return ret; 36 } 37 38 for (i = 0; i < switch_num - 1; i++) { 39 ret = pmic_reg_write(p, offset + i * SWITCH_SIZE, mode); 40 if (ret < 0) { 41 printf("Set switch 0x%x mode error!\n", 42 offset + i * SWITCH_SIZE); 43 return ret; 44 } 45 } 46 47 return ret; 48 } 49 50 struct pmic *pfuze_common_init(unsigned char i2cbus) 51 { 52 struct pmic *p; 53 int ret; 54 unsigned int reg; 55 56 ret = power_pfuze100_init(i2cbus); 57 if (ret) 58 return NULL; 59 60 p = pmic_get("PFUZE100"); 61 ret = pmic_probe(p); 62 if (ret) 63 return NULL; 64 65 pmic_reg_read(p, PFUZE100_DEVICEID, ®); 66 printf("PMIC: PFUZE100 ID=0x%02x\n", reg); 67 68 /* Set SW1AB stanby volage to 0.975V */ 69 pmic_reg_read(p, PFUZE100_SW1ABSTBY, ®); 70 reg &= ~SW1x_STBY_MASK; 71 reg |= SW1x_0_975V; 72 pmic_reg_write(p, PFUZE100_SW1ABSTBY, reg); 73 74 /* Set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */ 75 pmic_reg_read(p, PFUZE100_SW1ABCONF, ®); 76 reg &= ~SW1xCONF_DVSSPEED_MASK; 77 reg |= SW1xCONF_DVSSPEED_4US; 78 pmic_reg_write(p, PFUZE100_SW1ABCONF, reg); 79 80 /* Set SW1C standby voltage to 0.975V */ 81 pmic_reg_read(p, PFUZE100_SW1CSTBY, ®); 82 reg &= ~SW1x_STBY_MASK; 83 reg |= SW1x_0_975V; 84 pmic_reg_write(p, PFUZE100_SW1CSTBY, reg); 85 86 /* Set SW1C/VDDSOC step ramp up time from 16us to 4us/25mV */ 87 pmic_reg_read(p, PFUZE100_SW1CCONF, ®); 88 reg &= ~SW1xCONF_DVSSPEED_MASK; 89 reg |= SW1xCONF_DVSSPEED_4US; 90 pmic_reg_write(p, PFUZE100_SW1CCONF, reg); 91 92 return p; 93 } 94 #endif 95