xref: /openbmc/u-boot/board/freescale/common/pfuze.c (revision 8379c799)
1 /*
2  * Copyright 2014 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #include <common.h>
8 #include <errno.h>
9 #include <power/pmic.h>
10 #include <power/pfuze100_pmic.h>
11 
12 int pfuze_mode_init(struct pmic *p, u32 mode)
13 {
14 	unsigned char offset, i, switch_num;
15 	u32 id, ret;
16 
17 	pmic_reg_read(p, PFUZE100_DEVICEID, &id);
18 	id = id & 0xf;
19 
20 	if (id == 0) {
21 		switch_num = 6;
22 		offset = PFUZE100_SW1CMODE;
23 	} else if (id == 1) {
24 		switch_num = 4;
25 		offset = PFUZE100_SW2MODE;
26 	} else {
27 		printf("Not supported, id=%d\n", id);
28 		return -EINVAL;
29 	}
30 
31 	ret = pmic_reg_write(p, PFUZE100_SW1ABMODE, mode);
32 	if (ret < 0) {
33 		printf("Set SW1AB mode error!\n");
34 		return ret;
35 	}
36 
37 	for (i = 0; i < switch_num - 1; i++) {
38 		ret = pmic_reg_write(p, offset + i * SWITCH_SIZE, mode);
39 		if (ret < 0) {
40 			printf("Set switch 0x%x mode error!\n",
41 			       offset + i * SWITCH_SIZE);
42 			return ret;
43 		}
44 	}
45 
46 	return ret;
47 }
48 
49 struct pmic *pfuze_common_init(unsigned char i2cbus)
50 {
51 	struct pmic *p;
52 	int ret;
53 	unsigned int reg;
54 
55 	ret = power_pfuze100_init(i2cbus);
56 	if (ret)
57 		return NULL;
58 
59 	p = pmic_get("PFUZE100");
60 	ret = pmic_probe(p);
61 	if (ret)
62 		return NULL;
63 
64 	pmic_reg_read(p, PFUZE100_DEVICEID, &reg);
65 	printf("PMIC:  PFUZE100 ID=0x%02x\n", reg);
66 
67 	/* Set SW1AB stanby volage to 0.975V */
68 	pmic_reg_read(p, PFUZE100_SW1ABSTBY, &reg);
69 	reg &= ~SW1x_STBY_MASK;
70 	reg |= SW1x_0_975V;
71 	pmic_reg_write(p, PFUZE100_SW1ABSTBY, reg);
72 
73 	/* Set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
74 	pmic_reg_read(p, PFUZE100_SW1ABCONF, &reg);
75 	reg &= ~SW1xCONF_DVSSPEED_MASK;
76 	reg |= SW1xCONF_DVSSPEED_4US;
77 	pmic_reg_write(p, PFUZE100_SW1ABCONF, reg);
78 
79 	/* Set SW1C standby voltage to 0.975V */
80 	pmic_reg_read(p, PFUZE100_SW1CSTBY, &reg);
81 	reg &= ~SW1x_STBY_MASK;
82 	reg |= SW1x_0_975V;
83 	pmic_reg_write(p, PFUZE100_SW1CSTBY, reg);
84 
85 	/* Set SW1C/VDDSOC step ramp up time from 16us to 4us/25mV */
86 	pmic_reg_read(p, PFUZE100_SW1CCONF, &reg);
87 	reg &= ~SW1xCONF_DVSSPEED_MASK;
88 	reg |= SW1xCONF_DVSSPEED_4US;
89 	pmic_reg_write(p, PFUZE100_SW1CCONF, reg);
90 
91 	return p;
92 }
93