1 /* 2 * Copyright 2013 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #include <common.h> 8 #include <asm/processor.h> 9 #include <asm/mmu.h> 10 #include <asm/cache.h> 11 #include <asm/immap_85xx.h> 12 #include <asm/io.h> 13 #include <miiphy.h> 14 #include <libfdt.h> 15 #include <fdt_support.h> 16 #include <fsl_mdio.h> 17 #include <tsec.h> 18 #include <mmc.h> 19 #include <netdev.h> 20 #include <fsl_ifc.h> 21 #include <hwconfig.h> 22 #include <i2c.h> 23 #include <fsl_ddr_sdram.h> 24 #include <jffs2/load_kernel.h> 25 #include <mtd_node.h> 26 #include <flash.h> 27 28 #ifdef CONFIG_PCI 29 #include <pci.h> 30 #include <asm/fsl_pci.h> 31 #endif 32 33 #include "../common/qixis.h" 34 DECLARE_GLOBAL_DATA_PTR; 35 36 37 int board_early_init_f(void) 38 { 39 struct fsl_ifc ifc = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL}; 40 41 setbits_be32(&ifc.gregs->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT); 42 43 return 0; 44 } 45 46 void board_config_serdes_mux(void) 47 { 48 ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 49 u32 pordevsr = in_be32(&gur->pordevsr); 50 u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 51 MPC85xx_PORDEVSR_IO_SEL_SHIFT; 52 53 switch (srds_cfg) { 54 /* PEX(1) PEX(2) CPRI 2 CPRI 1 */ 55 case 1: 56 case 2: 57 case 3: 58 case 4: 59 case 5: 60 case 22: 61 case 23: 62 case 24: 63 case 25: 64 case 26: 65 QIXIS_WRITE_I2C(brdcfg[4], 0x03); 66 break; 67 68 /* PEX(1) PEX(2) SGMII1 CPRI 1 */ 69 case 6: 70 case 7: 71 case 8: 72 case 9: 73 case 10: 74 case 27: 75 case 28: 76 case 29: 77 case 30: 78 case 31: 79 QIXIS_WRITE_I2C(brdcfg[4], 0x01); 80 break; 81 82 /* PEX(1) PEX(2) SGMII1 SGMII2 */ 83 case 11: 84 case 32: 85 QIXIS_WRITE_I2C(brdcfg[4], 0x00); 86 break; 87 88 /* PEX(1) SGMII2 CPRI 2 CPRI 1 */ 89 case 12: 90 case 13: 91 case 14: 92 case 15: 93 case 16: 94 case 33: 95 case 34: 96 case 35: 97 case 36: 98 case 37: 99 QIXIS_WRITE_I2C(brdcfg[4], 0x07); 100 break; 101 102 /* PEX(1) SGMII2 SGMII1 CPRI 1 */ 103 case 17: 104 case 18: 105 case 19: 106 case 20: 107 case 21: 108 case 38: 109 case 39: 110 case 40: 111 case 41: 112 case 42: 113 QIXIS_WRITE_I2C(brdcfg[4], 0x05); 114 break; 115 116 /* SGMII1 SGMII2 CPRI 2 CPRI 1 */ 117 case 43: 118 case 44: 119 case 45: 120 case 46: 121 case 47: 122 QIXIS_WRITE_I2C(brdcfg[4], 0x0F); 123 break; 124 125 126 default: 127 break; 128 } 129 } 130 131 /* Configure DSP DDR controller */ 132 void dsp_ddr_configure(void) 133 { 134 /* 135 *There are separate DDR-controllers for DSP and PowerPC side DDR. 136 *copy the ddr controller settings from PowerPC side DDR controller 137 *to the DSP DDR controller as connected DDR memories are similar. 138 */ 139 struct ccsr_ddr __iomem *pa_ddr = 140 (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; 141 struct ccsr_ddr temp_ddr; 142 struct ccsr_ddr __iomem *dsp_ddr = 143 (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR; 144 145 memcpy(&temp_ddr, pa_ddr, sizeof(struct ccsr_ddr)); 146 temp_ddr.cs0_bnds = CONFIG_SYS_DDR1_CS0_BNDS; 147 temp_ddr.sdram_cfg &= ~SDRAM_CFG_MEM_EN; 148 memcpy(dsp_ddr, &temp_ddr, sizeof(struct ccsr_ddr)); 149 dsp_ddr->sdram_cfg |= SDRAM_CFG_MEM_EN; 150 } 151 152 int board_early_init_r(void) 153 { 154 #ifndef CONFIG_SYS_NO_FLASH 155 const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; 156 int flash_esel = find_tlb_idx((void *)flashbase, 1); 157 158 /* 159 * Remap Boot flash region to caching-inhibited 160 * so that flash can be erased properly. 161 */ 162 163 /* Flush d-cache and invalidate i-cache of any FLASH data */ 164 flush_dcache(); 165 invalidate_icache(); 166 167 if (flash_esel == -1) { 168 /* very unlikely unless something is messed up */ 169 puts("Error: Could not find TLB for FLASH BASE\n"); 170 flash_esel = 2; /* give our best effort to continue */ 171 } else { 172 /* invalidate existing TLB entry for flash */ 173 disable_tlb(flash_esel); 174 } 175 176 set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, 177 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 178 0, flash_esel, BOOKE_PAGESZ_64M, 1); 179 180 set_tlb(1, flashbase + 0x4000000, 181 CONFIG_SYS_FLASH_BASE_PHYS + 0x4000000, 182 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 183 0, flash_esel+1, BOOKE_PAGESZ_64M, 1); 184 #endif 185 board_config_serdes_mux(); 186 dsp_ddr_configure(); 187 return 0; 188 } 189 190 #ifdef CONFIG_PCI 191 void pci_init_board(void) 192 { 193 fsl_pcie_init_board(0); 194 } 195 #endif /* ifdef CONFIG_PCI */ 196 197 int checkboard(void) 198 { 199 struct cpu_type *cpu; 200 u8 sw; 201 202 cpu = gd->arch.cpu; 203 printf("Board: %sQDS\n", cpu->name); 204 205 printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x,\n", 206 QIXIS_READ(id), QIXIS_READ(arch), QIXIS_READ(scver)); 207 208 sw = QIXIS_READ(brdcfg[0]); 209 sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT; 210 211 printf("IFC chip select:"); 212 switch (sw) { 213 case 0: 214 printf("NOR\n"); 215 break; 216 case 2: 217 printf("Promjet\n"); 218 break; 219 case 4: 220 printf("NAND\n"); 221 break; 222 default: 223 printf("Invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH); 224 break; 225 } 226 227 return 0; 228 } 229 230 #ifdef CONFIG_TSEC_ENET 231 int board_eth_init(bd_t *bis) 232 { 233 struct fsl_pq_mdio_info mdio_info; 234 struct tsec_info_struct tsec_info[4]; 235 int num = 0; 236 237 #ifdef CONFIG_TSEC1 238 SET_STD_TSEC_INFO(tsec_info[num], 1); 239 num++; 240 241 #endif 242 243 #ifdef CONFIG_TSEC2 244 SET_STD_TSEC_INFO(tsec_info[num], 2); 245 num++; 246 #endif 247 248 mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; 249 mdio_info.name = DEFAULT_MII_NAME; 250 251 fsl_pq_mdio_init(bis, &mdio_info); 252 tsec_eth_init(bis, tsec_info, num); 253 254 #ifdef CONFIG_PCI 255 pci_eth_init(bis); 256 #endif 257 258 return 0; 259 } 260 #endif 261 262 #define USBMUX_SEL_MASK 0xc0 263 #define USBMUX_SEL_UART2 0xc0 264 #define USBMUX_SEL_USB 0x40 265 #define SPIMUX_SEL_UART3 0x80 266 #define GPS_MUX_SEL_GPS 0x40 267 268 #define TSEC_1588_CLKIN_MASK 0x03 269 #define CON_XCVR_REF_CLK 0x00 270 271 int misc_init_r(void) 272 { 273 u8 val; 274 ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 275 u32 porbmsr = in_be32(&gur->porbmsr); 276 u32 romloc = (porbmsr >> MPC85xx_PORBMSR_ROMLOC_SHIFT) & 0xf; 277 278 /*Configure 1588 clock-in source from RF Card*/ 279 val = QIXIS_READ_I2C(brdcfg[5]); 280 QIXIS_WRITE_I2C(brdcfg[5], 281 (val & ~(TSEC_1588_CLKIN_MASK)) | CON_XCVR_REF_CLK); 282 283 if (hwconfig("uart2") && hwconfig("usb1")) { 284 printf("UART2 and USB cannot work together on the board\n"); 285 printf("Remove one from hwconfig and reset\n"); 286 } else { 287 if (hwconfig("uart2")) { 288 val = QIXIS_READ_I2C(brdcfg[5]); 289 QIXIS_WRITE_I2C(brdcfg[5], 290 (val & ~(USBMUX_SEL_MASK)) | USBMUX_SEL_UART2); 291 clrbits_be32(&gur->pmuxcr3, 292 MPC85xx_PMUXCR3_USB_SEL_MASK); 293 setbits_be32(&gur->pmuxcr3, MPC85xx_PMUXCR3_UART2_SEL); 294 } else { 295 /* By default USB should be selected. 296 * Programming FPGA to select USB. */ 297 val = QIXIS_READ_I2C(brdcfg[5]); 298 QIXIS_WRITE_I2C(brdcfg[5], 299 (val & ~(USBMUX_SEL_MASK)) | USBMUX_SEL_USB); 300 } 301 302 } 303 304 if (hwconfig("sim")) { 305 if (romloc == PORBMSR_ROMLOC_NAND_2K || 306 romloc == PORBMSR_ROMLOC_NOR || 307 romloc == PORBMSR_ROMLOC_SPI) { 308 309 val = QIXIS_READ_I2C(brdcfg[3]); 310 QIXIS_WRITE_I2C(brdcfg[3], val|0x10); 311 clrbits_be32(&gur->pmuxcr, 312 MPC85xx_PMUXCR0_SIM_SEL_MASK); 313 setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR0_SIM_SEL); 314 } 315 } 316 317 if (hwconfig("uart3")) { 318 if (romloc == PORBMSR_ROMLOC_NAND_2K || 319 romloc == PORBMSR_ROMLOC_NOR || 320 romloc == PORBMSR_ROMLOC_SDHC) { 321 322 /* UART3 and SPI1 (Flashes) are muxed together */ 323 val = QIXIS_READ_I2C(brdcfg[3]); 324 QIXIS_WRITE_I2C(brdcfg[3], (val | SPIMUX_SEL_UART3)); 325 clrbits_be32(&gur->pmuxcr3, 326 MPC85xx_PMUXCR3_UART3_SEL_MASK); 327 setbits_be32(&gur->pmuxcr3, MPC85xx_PMUXCR3_UART3_SEL); 328 329 /* MUX to select UART3 connection to J24 header 330 * or to GPS */ 331 val = QIXIS_READ_I2C(brdcfg[6]); 332 if (hwconfig("gps")) 333 QIXIS_WRITE_I2C(brdcfg[6], 334 (val | GPS_MUX_SEL_GPS)); 335 else 336 QIXIS_WRITE_I2C(brdcfg[6], 337 (val & ~(GPS_MUX_SEL_GPS))); 338 } 339 } 340 return 0; 341 } 342 343 void fdt_del_node_compat(void *blob, const char *compatible) 344 { 345 int err; 346 int off = fdt_node_offset_by_compatible(blob, -1, compatible); 347 if (off < 0) { 348 printf("WARNING: could not find compatible node %s: %s.\n", 349 compatible, fdt_strerror(off)); 350 return; 351 } 352 err = fdt_del_node(blob, off); 353 if (err < 0) { 354 printf("WARNING: could not remove %s: %s.\n", 355 compatible, fdt_strerror(err)); 356 } 357 } 358 359 #if defined(CONFIG_OF_BOARD_SETUP) 360 #ifdef CONFIG_FDT_FIXUP_PARTITIONS 361 struct node_info nodes[] = { 362 { "cfi-flash", MTD_DEV_TYPE_NOR, }, 363 { "fsl,ifc-nand", MTD_DEV_TYPE_NAND, }, 364 }; 365 #endif 366 int ft_board_setup(void *blob, bd_t *bd) 367 { 368 phys_addr_t base; 369 phys_size_t size; 370 371 ft_cpu_setup(blob, bd); 372 373 base = getenv_bootm_low(); 374 size = getenv_bootm_size(); 375 376 #if defined(CONFIG_PCI) 377 FT_FSL_PCI_SETUP; 378 #endif 379 380 fdt_fixup_memory(blob, (u64)base, (u64)size); 381 #ifdef CONFIG_FDT_FIXUP_PARTITIONS 382 fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes)); 383 #endif 384 385 ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 386 u32 porbmsr = in_be32(&gur->porbmsr); 387 u32 romloc = (porbmsr >> MPC85xx_PORBMSR_ROMLOC_SHIFT) & 0xf; 388 389 if (!(hwconfig("uart2") && hwconfig("usb1"))) { 390 /* If uart2 is there in hwconfig remove usb node from 391 * device tree */ 392 393 if (hwconfig("uart2")) { 394 /* remove dts usb node */ 395 fdt_del_node_compat(blob, "fsl-usb2-dr"); 396 } else { 397 fdt_fixup_dr_usb(blob, bd); 398 fdt_del_node_and_alias(blob, "serial2"); 399 } 400 } 401 402 if (hwconfig("uart3")) { 403 if (romloc == PORBMSR_ROMLOC_NAND_2K || 404 romloc == PORBMSR_ROMLOC_NOR || 405 romloc == PORBMSR_ROMLOC_SDHC) 406 /* Delete SPI node from the device tree */ 407 fdt_del_node_and_alias(blob, "spi1"); 408 } else 409 fdt_del_node_and_alias(blob, "serial3"); 410 411 if (hwconfig("sim")) { 412 if (romloc == PORBMSR_ROMLOC_NAND_2K || 413 romloc == PORBMSR_ROMLOC_NOR || 414 romloc == PORBMSR_ROMLOC_SPI) { 415 416 /* remove dts sdhc node */ 417 fdt_del_node_compat(blob, "fsl,esdhc"); 418 } else if (romloc == PORBMSR_ROMLOC_SDHC) { 419 420 /* remove dts sim node */ 421 fdt_del_node_compat(blob, "fsl,sim-v1.0"); 422 printf("SIM & SDHC can't work together on the board"); 423 printf("\nRemove sim from hwconfig and reset\n"); 424 } 425 } 426 427 return 0; 428 } 429 #endif 430