1 /*
2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #include <common.h>
8 #include <asm/mmu.h>
9 #include <asm/immap_85xx.h>
10 #include <asm/processor.h>
11 #include <fsl_ddr_sdram.h>
12 #include <fsl_ddr_dimm_params.h>
13 #include <asm/io.h>
14 #include <asm/fsl_law.h>
15 
16 DECLARE_GLOBAL_DATA_PTR;
17 
18 #ifndef CONFIG_SYS_DDR_RAW_TIMING
19 #define CONFIG_SYS_DRAM_SIZE	1024
20 
21 fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = {
22 	.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
23 	.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
24 	.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
25 	.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_800,
26 	.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_800,
27 	.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_800,
28 	.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_800,
29 	.ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
30 	.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
31 	.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_800,
32 	.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_800,
33 	.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
34 	.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_800,
35 	.ddr_data_init = CONFIG_MEM_INIT_VALUE,
36 	.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_800,
37 	.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
38 	.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
39 	.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
40 	.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
41 	.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
42 	.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL_800,
43 	.ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
44 	.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
45 	.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
46 };
47 
48 fixed_ddr_parm_t fixed_ddr_parm_0[] = {
49 	{750, 850, &ddr_cfg_regs_800},
50 	{0, 0, NULL}
51 };
52 
53 unsigned long get_sdram_size(void)
54 {
55 	return get_ram_size(CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DRAM_SIZE);
56 }
57 
58 /*
59  * Fixed sdram init -- doesn't use serial presence detect.
60  */
61 phys_size_t fixed_sdram(void)
62 {
63 	int i;
64 	char buf[32];
65 	fsl_ddr_cfg_regs_t ddr_cfg_regs;
66 	phys_size_t ddr_size;
67 	ulong ddr_freq, ddr_freq_mhz;
68 
69 	ddr_freq = get_ddr_freq(0);
70 	ddr_freq_mhz = ddr_freq / 1000000;
71 
72 	printf("Configuring DDR for %s MT/s data rate\n",
73 				strmhz(buf, ddr_freq));
74 
75 	for (i = 0; fixed_ddr_parm_0[i].max_freq > 0; i++) {
76 		if ((ddr_freq_mhz > fixed_ddr_parm_0[i].min_freq) &&
77 		   (ddr_freq_mhz <= fixed_ddr_parm_0[i].max_freq)) {
78 			memcpy(&ddr_cfg_regs, fixed_ddr_parm_0[i].ddr_settings,
79 							sizeof(ddr_cfg_regs));
80 			break;
81 		}
82 	}
83 
84 	if (fixed_ddr_parm_0[i].max_freq == 0) {
85 		panic("Unsupported DDR data rate %s MT/s data rate\n",
86 					strmhz(buf, ddr_freq));
87 	}
88 
89 	ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
90 	fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0);
91 
92 	if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, ddr_size,
93 					LAW_TRGT_IF_DDR_1) < 0) {
94 		printf("ERROR setting Local Access Windows for DDR\n");
95 		return 0;
96 	}
97 
98 	return ddr_size;
99 }
100 
101 #else /* CONFIG_SYS_DDR_RAW_TIMING */
102 /* Micron MT41J256M8HX-15E */
103 dimm_params_t ddr_raw_timing = {
104 	.n_ranks = 1,
105 	.rank_density = 1073741824u,
106 	.capacity = 1073741824u,
107 	.primary_sdram_width = 32,
108 	.ec_sdram_width = 0,
109 	.registered_dimm = 0,
110 	.mirrored_dimm = 0,
111 	.n_row_addr = 15,
112 	.n_col_addr = 10,
113 	.n_banks_per_sdram_device = 8,
114 	.edc_config = 0,
115 	.burst_lengths_bitmask = 0x0c,
116 
117 	.tckmin_x_ps = 1870,
118 	.caslat_x = 0x1e << 4,	/* 5,6,7,8 */
119 	.taa_ps = 13125,
120 	.twr_ps = 15000,
121 	.trcd_ps = 13125,
122 	.trrd_ps = 7500,
123 	.trp_ps = 13125,
124 	.tras_ps = 37500,
125 	.trc_ps = 50625,
126 	.trfc_ps = 160000,
127 	.twtr_ps = 7500,
128 	.trtp_ps = 7500,
129 	.refresh_rate_ps = 7800000,
130 	.tfaw_ps = 37500,
131 };
132 
133 int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
134 		unsigned int controller_number,
135 		unsigned int dimm_number)
136 {
137 	const char dimm_model[] = "Fixed DDR on board";
138 
139 	if ((controller_number == 0) && (dimm_number == 0)) {
140 		memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
141 		memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
142 		memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
143 	}
144 
145 	return 0;
146 }
147 
148 void fsl_ddr_board_options(memctl_options_t *popts,
149 				dimm_params_t *pdimm,
150 				unsigned int ctrl_num)
151 {
152 	int i;
153 	popts->clk_adjust = 6;
154 	popts->cpo_override = 0x1f;
155 	popts->write_data_delay = 2;
156 	popts->half_strength_driver_enable = 1;
157 	/* Write leveling override */
158 	popts->wrlvl_en = 1;
159 	popts->wrlvl_override = 1;
160 	popts->wrlvl_sample = 0xf;
161 	popts->wrlvl_start = 0x8;
162 	popts->trwt_override = 1;
163 	popts->trwt = 0;
164 
165 	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
166 		popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER;
167 		popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
168 	}
169 }
170 
171 #endif /* CONFIG_SYS_DDR_RAW_TIMING */
172