1 /* 2 * Copyright 2011-2012 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #include <common.h> 8 #include <command.h> 9 #include <i2c.h> 10 #include <netdev.h> 11 #include <linux/compiler.h> 12 #include <asm/mmu.h> 13 #include <asm/processor.h> 14 #include <linux/errno.h> 15 #include <asm/cache.h> 16 #include <asm/immap_85xx.h> 17 #include <asm/fsl_law.h> 18 #include <asm/fsl_serdes.h> 19 #include <asm/fsl_liodn.h> 20 #include <fm_eth.h> 21 #include <hwconfig.h> 22 23 #include "../common/qixis.h" 24 #include "../common/vsc3316_3308.h" 25 #include "../common/idt8t49n222a_serdes_clk.h" 26 #include "../common/zm7300.h" 27 #include "b4860qds.h" 28 #include "b4860qds_qixis.h" 29 #include "b4860qds_crossbar_con.h" 30 31 #define CLK_MUX_SEL_MASK 0x4 32 #define ETH_PHY_CLK_OUT 0x4 33 34 DECLARE_GLOBAL_DATA_PTR; 35 36 int checkboard(void) 37 { 38 char buf[64]; 39 u8 sw; 40 struct cpu_type *cpu = gd->arch.cpu; 41 static const char *const freq[] = {"100", "125", "156.25", "161.13", 42 "122.88", "122.88", "122.88"}; 43 int clock; 44 45 printf("Board: %sQDS, ", cpu->name); 46 printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, ", 47 QIXIS_READ(id), QIXIS_READ(arch)); 48 49 sw = QIXIS_READ(brdcfg[0]); 50 sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT; 51 52 if (sw < 0x8) 53 printf("vBank: %d\n", sw); 54 else if (sw >= 0x8 && sw <= 0xE) 55 puts("NAND\n"); 56 else 57 printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH); 58 59 printf("FPGA: v%d (%s), build %d", 60 (int)QIXIS_READ(scver), qixis_read_tag(buf), 61 (int)qixis_read_minor()); 62 /* the timestamp string contains "\n" at the end */ 63 printf(" on %s", qixis_read_time(buf)); 64 65 /* 66 * Display the actual SERDES reference clocks as configured by the 67 * dip switches on the board. Note that the SWx registers could 68 * technically be set to force the reference clocks to match the 69 * values that the SERDES expects (or vice versa). For now, however, 70 * we just display both values and hope the user notices when they 71 * don't match. 72 */ 73 puts("SERDES Reference Clocks: "); 74 sw = QIXIS_READ(brdcfg[2]); 75 clock = (sw >> 5) & 7; 76 printf("Bank1=%sMHz ", freq[clock]); 77 sw = QIXIS_READ(brdcfg[4]); 78 clock = (sw >> 6) & 3; 79 printf("Bank2=%sMHz\n", freq[clock]); 80 81 return 0; 82 } 83 84 int select_i2c_ch_pca(u8 ch) 85 { 86 int ret; 87 88 /* Selecting proper channel via PCA*/ 89 ret = i2c_write(I2C_MUX_PCA_ADDR, 0x0, 1, &ch, 1); 90 if (ret) { 91 printf("PCA: failed to select proper channel.\n"); 92 return ret; 93 } 94 95 return 0; 96 } 97 98 /* 99 * read_voltage from sensor on I2C bus 100 * We use average of 4 readings, waiting for 532us befor another reading 101 */ 102 #define WAIT_FOR_ADC 532 /* wait for 532 microseconds for ADC */ 103 #define NUM_READINGS 4 /* prefer to be power of 2 for efficiency */ 104 105 static inline int read_voltage(void) 106 { 107 int i, ret, voltage_read = 0; 108 u16 vol_mon; 109 110 for (i = 0; i < NUM_READINGS; i++) { 111 ret = i2c_read(I2C_VOL_MONITOR_ADDR, 112 I2C_VOL_MONITOR_BUS_V_OFFSET, 1, (void *)&vol_mon, 2); 113 if (ret) { 114 printf("VID: failed to read core voltage\n"); 115 return ret; 116 } 117 if (vol_mon & I2C_VOL_MONITOR_BUS_V_OVF) { 118 printf("VID: Core voltage sensor error\n"); 119 return -1; 120 } 121 debug("VID: bus voltage reads 0x%04x\n", vol_mon); 122 /* LSB = 4mv */ 123 voltage_read += (vol_mon >> I2C_VOL_MONITOR_BUS_V_SHIFT) * 4; 124 udelay(WAIT_FOR_ADC); 125 } 126 /* calculate the average */ 127 voltage_read /= NUM_READINGS; 128 129 return voltage_read; 130 } 131 132 static int adjust_vdd(ulong vdd_override) 133 { 134 int re_enable = disable_interrupts(); 135 ccsr_gur_t __iomem *gur = 136 (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 137 u32 fusesr; 138 u8 vid; 139 int vdd_target, vdd_last; 140 int existing_voltage, temp_voltage, voltage; /* all in 1/10 mV */ 141 int ret; 142 unsigned int orig_i2c_speed; 143 unsigned long vdd_string_override; 144 char *vdd_string; 145 static const uint16_t vdd[32] = { 146 0, /* unused */ 147 9875, /* 0.9875V */ 148 9750, 149 9625, 150 9500, 151 9375, 152 9250, 153 9125, 154 9000, 155 8875, 156 8750, 157 8625, 158 8500, 159 8375, 160 8250, 161 8125, 162 10000, /* 1.0000V */ 163 10125, 164 10250, 165 10375, 166 10500, 167 10625, 168 10750, 169 10875, 170 11000, 171 0, /* reserved */ 172 }; 173 struct vdd_drive { 174 u8 vid; 175 unsigned voltage; 176 }; 177 178 ret = select_i2c_ch_pca(I2C_MUX_CH_VOL_MONITOR); 179 if (ret) { 180 printf("VID: I2c failed to switch channel\n"); 181 ret = -1; 182 goto exit; 183 } 184 185 /* get the voltage ID from fuse status register */ 186 fusesr = in_be32(&gur->dcfg_fusesr); 187 vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_VID_SHIFT) & 188 FSL_CORENET_DCFG_FUSESR_VID_MASK; 189 if (vid == FSL_CORENET_DCFG_FUSESR_VID_MASK) { 190 vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_ALTVID_SHIFT) & 191 FSL_CORENET_DCFG_FUSESR_ALTVID_MASK; 192 } 193 vdd_target = vdd[vid]; 194 debug("VID:Reading from from fuse,vid=%x vdd is %dmV\n", 195 vid, vdd_target/10); 196 197 /* check override variable for overriding VDD */ 198 vdd_string = env_get("b4qds_vdd_mv"); 199 if (vdd_override == 0 && vdd_string && 200 !strict_strtoul(vdd_string, 10, &vdd_string_override)) 201 vdd_override = vdd_string_override; 202 if (vdd_override >= 819 && vdd_override <= 1212) { 203 vdd_target = vdd_override * 10; /* convert to 1/10 mV */ 204 debug("VDD override is %lu\n", vdd_override); 205 } else if (vdd_override != 0) { 206 printf("Invalid value.\n"); 207 } 208 209 if (vdd_target == 0) { 210 printf("VID: VID not used\n"); 211 ret = 0; 212 goto exit; 213 } 214 215 /* 216 * Read voltage monitor to check real voltage. 217 * Voltage monitor LSB is 4mv. 218 */ 219 vdd_last = read_voltage(); 220 if (vdd_last < 0) { 221 printf("VID: abort VID adjustment\n"); 222 ret = -1; 223 goto exit; 224 } 225 226 debug("VID: Core voltage is at %d mV\n", vdd_last); 227 ret = select_i2c_ch_pca(I2C_MUX_CH_DPM); 228 if (ret) { 229 printf("VID: I2c failed to switch channel to DPM\n"); 230 ret = -1; 231 goto exit; 232 } 233 234 /* Round up to the value of step of Voltage regulator */ 235 voltage = roundup(vdd_target, ZM_STEP); 236 debug("VID: rounded up voltage = %d\n", voltage); 237 238 /* lower the speed to 100kHz to access ZM7300 device */ 239 debug("VID: Setting bus speed to 100KHz if not already set\n"); 240 orig_i2c_speed = i2c_get_bus_speed(); 241 if (orig_i2c_speed != 100000) 242 i2c_set_bus_speed(100000); 243 244 /* Read the existing level on board, if equal to requsted one, 245 no need to re-set */ 246 existing_voltage = zm_read_voltage(); 247 248 /* allowing the voltage difference of one step 0.0125V acceptable */ 249 if ((existing_voltage >= voltage) && 250 (existing_voltage < (voltage + ZM_STEP))) { 251 debug("VID: voltage already set as requested,returning\n"); 252 ret = existing_voltage; 253 goto out; 254 } 255 debug("VID: Changing voltage for board from %dmV to %dmV\n", 256 existing_voltage/10, voltage/10); 257 258 if (zm_disable_wp() < 0) { 259 ret = -1; 260 goto out; 261 } 262 /* Change Voltage: the change is done through all the steps in the 263 way, to avoid reset to the board due to power good signal fail 264 in big voltage change gap jump. 265 */ 266 if (existing_voltage > voltage) { 267 temp_voltage = existing_voltage - ZM_STEP; 268 while (temp_voltage >= voltage) { 269 ret = zm_write_voltage(temp_voltage); 270 if (ret == temp_voltage) { 271 temp_voltage -= ZM_STEP; 272 } else { 273 /* ZM7300 device failed to set 274 * the voltage */ 275 printf 276 ("VID:Stepping down vol failed:%dmV\n", 277 temp_voltage/10); 278 ret = -1; 279 goto out; 280 } 281 } 282 } else { 283 temp_voltage = existing_voltage + ZM_STEP; 284 while (temp_voltage < (voltage + ZM_STEP)) { 285 ret = zm_write_voltage(temp_voltage); 286 if (ret == temp_voltage) { 287 temp_voltage += ZM_STEP; 288 } else { 289 /* ZM7300 device failed to set 290 * the voltage */ 291 printf 292 ("VID:Stepping up vol failed:%dmV\n", 293 temp_voltage/10); 294 ret = -1; 295 goto out; 296 } 297 } 298 } 299 300 if (zm_enable_wp() < 0) 301 ret = -1; 302 303 /* restore the speed to 400kHz */ 304 out: debug("VID: Restore the I2C bus speed to %dKHz\n", 305 orig_i2c_speed/1000); 306 i2c_set_bus_speed(orig_i2c_speed); 307 if (ret < 0) 308 goto exit; 309 310 ret = select_i2c_ch_pca(I2C_MUX_CH_VOL_MONITOR); 311 if (ret) { 312 printf("VID: I2c failed to switch channel\n"); 313 ret = -1; 314 goto exit; 315 } 316 vdd_last = read_voltage(); 317 select_i2c_ch_pca(I2C_CH_DEFAULT); 318 319 if (vdd_last > 0) 320 printf("VID: Core voltage %d mV\n", vdd_last); 321 else 322 ret = -1; 323 324 exit: 325 if (re_enable) 326 enable_interrupts(); 327 return ret; 328 } 329 330 int configure_vsc3316_3308(void) 331 { 332 ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 333 unsigned int num_vsc16_con, num_vsc08_con; 334 u32 serdes1_prtcl, serdes2_prtcl; 335 int ret; 336 char buffer[HWCONFIG_BUFFER_SIZE]; 337 char *buf = NULL; 338 339 serdes1_prtcl = in_be32(&gur->rcwsr[4]) & 340 FSL_CORENET2_RCWSR4_SRDS1_PRTCL; 341 if (!serdes1_prtcl) { 342 printf("SERDES1 is not enabled\n"); 343 return 0; 344 } 345 serdes1_prtcl >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; 346 debug("Using SERDES1 Protocol: 0x%x:\n", serdes1_prtcl); 347 348 serdes2_prtcl = in_be32(&gur->rcwsr[4]) & 349 FSL_CORENET2_RCWSR4_SRDS2_PRTCL; 350 if (!serdes2_prtcl) { 351 printf("SERDES2 is not enabled\n"); 352 return 0; 353 } 354 serdes2_prtcl >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; 355 debug("Using SERDES2 Protocol: 0x%x:\n", serdes2_prtcl); 356 357 switch (serdes1_prtcl) { 358 case 0x29: 359 case 0x2a: 360 case 0x2C: 361 case 0x2D: 362 case 0x2E: 363 /* 364 * Configuration: 365 * SERDES: 1 366 * Lanes: A,B: SGMII 367 * Lanes: C,D,E,F,G,H: CPRI 368 */ 369 debug("Configuring crossbar to use onboard SGMII PHYs:" 370 "srds_prctl:%x\n", serdes1_prtcl); 371 num_vsc16_con = NUM_CON_VSC3316; 372 /* Configure VSC3316 crossbar switch */ 373 ret = select_i2c_ch_pca(I2C_CH_VSC3316); 374 if (!ret) { 375 ret = vsc3316_config(VSC3316_TX_ADDRESS, 376 vsc16_tx_4sfp_sgmii_12_56, 377 num_vsc16_con); 378 if (ret) 379 return ret; 380 ret = vsc3316_config(VSC3316_RX_ADDRESS, 381 vsc16_rx_4sfp_sgmii_12_56, 382 num_vsc16_con); 383 if (ret) 384 return ret; 385 } else { 386 return ret; 387 } 388 break; 389 390 case 0x01: 391 case 0x02: 392 case 0x04: 393 case 0x05: 394 case 0x06: 395 case 0x07: 396 case 0x08: 397 case 0x09: 398 case 0x0A: 399 case 0x0B: 400 case 0x0C: 401 case 0x2F: 402 case 0x30: 403 case 0x32: 404 case 0x33: 405 case 0x34: 406 case 0x39: 407 case 0x3A: 408 case 0x3C: 409 case 0x3D: 410 case 0x5C: 411 case 0x5D: 412 /* 413 * Configuration: 414 * SERDES: 1 415 * Lanes: A,B: AURORA 416 * Lanes: C,d: SGMII 417 * Lanes: E,F,G,H: CPRI 418 */ 419 debug("Configuring crossbar for Aurora, SGMII 3 and 4," 420 " and CPRI. srds_prctl:%x\n", serdes1_prtcl); 421 num_vsc16_con = NUM_CON_VSC3316; 422 /* Configure VSC3316 crossbar switch */ 423 ret = select_i2c_ch_pca(I2C_CH_VSC3316); 424 if (!ret) { 425 ret = vsc3316_config(VSC3316_TX_ADDRESS, 426 vsc16_tx_sfp_sgmii_aurora, 427 num_vsc16_con); 428 if (ret) 429 return ret; 430 ret = vsc3316_config(VSC3316_RX_ADDRESS, 431 vsc16_rx_sfp_sgmii_aurora, 432 num_vsc16_con); 433 if (ret) 434 return ret; 435 } else { 436 return ret; 437 } 438 break; 439 440 #ifdef CONFIG_ARCH_B4420 441 case 0x17: 442 case 0x18: 443 /* 444 * Configuration: 445 * SERDES: 1 446 * Lanes: A,B,C,D: SGMII 447 * Lanes: E,F,G,H: CPRI 448 */ 449 debug("Configuring crossbar to use onboard SGMII PHYs:" 450 "srds_prctl:%x\n", serdes1_prtcl); 451 num_vsc16_con = NUM_CON_VSC3316; 452 /* Configure VSC3316 crossbar switch */ 453 ret = select_i2c_ch_pca(I2C_CH_VSC3316); 454 if (!ret) { 455 ret = vsc3316_config(VSC3316_TX_ADDRESS, 456 vsc16_tx_sgmii_lane_cd, num_vsc16_con); 457 if (ret) 458 return ret; 459 ret = vsc3316_config(VSC3316_RX_ADDRESS, 460 vsc16_rx_sgmii_lane_cd, num_vsc16_con); 461 if (ret) 462 return ret; 463 } else { 464 return ret; 465 } 466 break; 467 #endif 468 469 case 0x3E: 470 case 0x0D: 471 case 0x0E: 472 case 0x12: 473 num_vsc16_con = NUM_CON_VSC3316; 474 /* Configure VSC3316 crossbar switch */ 475 ret = select_i2c_ch_pca(I2C_CH_VSC3316); 476 if (!ret) { 477 ret = vsc3316_config(VSC3316_TX_ADDRESS, 478 vsc16_tx_sfp, num_vsc16_con); 479 if (ret) 480 return ret; 481 ret = vsc3316_config(VSC3316_RX_ADDRESS, 482 vsc16_rx_sfp, num_vsc16_con); 483 if (ret) 484 return ret; 485 } else { 486 return ret; 487 } 488 break; 489 default: 490 printf("WARNING:VSC crossbars programming not supported for:%x" 491 " SerDes1 Protocol.\n", serdes1_prtcl); 492 return -1; 493 } 494 495 num_vsc08_con = NUM_CON_VSC3308; 496 /* Configure VSC3308 crossbar switch */ 497 ret = select_i2c_ch_pca(I2C_CH_VSC3308); 498 switch (serdes2_prtcl) { 499 #ifdef CONFIG_ARCH_B4420 500 case 0x9d: 501 #endif 502 case 0x9E: 503 case 0x9A: 504 case 0x98: 505 case 0x48: 506 case 0x49: 507 case 0x4E: 508 case 0x79: 509 case 0x7A: 510 if (!ret) { 511 ret = vsc3308_config(VSC3308_TX_ADDRESS, 512 vsc08_tx_amc, num_vsc08_con); 513 if (ret) 514 return ret; 515 ret = vsc3308_config(VSC3308_RX_ADDRESS, 516 vsc08_rx_amc, num_vsc08_con); 517 if (ret) 518 return ret; 519 } else { 520 return ret; 521 } 522 break; 523 case 0x80: 524 case 0x81: 525 case 0x82: 526 case 0x83: 527 case 0x84: 528 case 0x85: 529 case 0x86: 530 case 0x87: 531 case 0x88: 532 case 0x89: 533 case 0x8a: 534 case 0x8b: 535 case 0x8c: 536 case 0x8d: 537 case 0x8e: 538 case 0xb1: 539 case 0xb2: 540 if (!ret) { 541 /* 542 * Extract hwconfig from environment since environment 543 * is not setup properly yet 544 */ 545 env_get_f("hwconfig", buffer, sizeof(buffer)); 546 buf = buffer; 547 548 if (hwconfig_subarg_cmp_f("fsl_b4860_serdes2", 549 "sfp_amc", "sfp", buf)) { 550 #ifdef CONFIG_SYS_FSL_B4860QDS_XFI_ERR 551 /* change default VSC3308 for XFI erratum */ 552 ret = vsc3308_config_adjust(VSC3308_TX_ADDRESS, 553 vsc08_tx_sfp, num_vsc08_con); 554 if (ret) 555 return ret; 556 557 ret = vsc3308_config_adjust(VSC3308_RX_ADDRESS, 558 vsc08_rx_sfp, num_vsc08_con); 559 if (ret) 560 return ret; 561 #else 562 ret = vsc3308_config(VSC3308_TX_ADDRESS, 563 vsc08_tx_sfp, num_vsc08_con); 564 if (ret) 565 return ret; 566 567 ret = vsc3308_config(VSC3308_RX_ADDRESS, 568 vsc08_rx_sfp, num_vsc08_con); 569 if (ret) 570 return ret; 571 #endif 572 } else { 573 ret = vsc3308_config(VSC3308_TX_ADDRESS, 574 vsc08_tx_amc, num_vsc08_con); 575 if (ret) 576 return ret; 577 578 ret = vsc3308_config(VSC3308_RX_ADDRESS, 579 vsc08_rx_amc, num_vsc08_con); 580 if (ret) 581 return ret; 582 } 583 584 } else { 585 return ret; 586 } 587 break; 588 default: 589 printf("WARNING:VSC crossbars programming not supported for: %x" 590 " SerDes2 Protocol.\n", serdes2_prtcl); 591 return -1; 592 } 593 594 return 0; 595 } 596 597 static int calibrate_pll(serdes_corenet_t *srds_regs, int pll_num) 598 { 599 u32 rst_err; 600 601 /* Steps For SerDes PLLs reset and reconfiguration 602 * or PLL power-up procedure 603 */ 604 debug("CALIBRATE PLL:%d\n", pll_num); 605 clrbits_be32(&srds_regs->bank[pll_num].rstctl, 606 SRDS_RSTCTL_SDRST_B); 607 udelay(10); 608 clrbits_be32(&srds_regs->bank[pll_num].rstctl, 609 (SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B)); 610 udelay(10); 611 setbits_be32(&srds_regs->bank[pll_num].rstctl, 612 SRDS_RSTCTL_RST); 613 setbits_be32(&srds_regs->bank[pll_num].rstctl, 614 (SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B 615 | SRDS_RSTCTL_SDRST_B)); 616 617 udelay(20); 618 619 /* Check whether PLL has been locked or not */ 620 rst_err = in_be32(&srds_regs->bank[pll_num].rstctl) & 621 SRDS_RSTCTL_RSTERR; 622 rst_err >>= SRDS_RSTCTL_RSTERR_SHIFT; 623 debug("RST_ERR value for PLL %d is: 0x%x:\n", pll_num, rst_err); 624 if (rst_err) 625 return rst_err; 626 627 return rst_err; 628 } 629 630 static int check_pll_locks(serdes_corenet_t *srds_regs, int pll_num) 631 { 632 int ret = 0; 633 u32 fcap, dcbias, bcap, pllcr1, pllcr0; 634 635 if (calibrate_pll(srds_regs, pll_num)) { 636 /* STEP 1 */ 637 /* Read fcap, dcbias and bcap value */ 638 clrbits_be32(&srds_regs->bank[pll_num].pllcr0, 639 SRDS_PLLCR0_DCBIAS_OUT_EN); 640 fcap = in_be32(&srds_regs->bank[pll_num].pllsr2) & 641 SRDS_PLLSR2_FCAP; 642 fcap >>= SRDS_PLLSR2_FCAP_SHIFT; 643 bcap = in_be32(&srds_regs->bank[pll_num].pllsr2) & 644 SRDS_PLLSR2_BCAP_EN; 645 bcap >>= SRDS_PLLSR2_BCAP_EN_SHIFT; 646 setbits_be32(&srds_regs->bank[pll_num].pllcr0, 647 SRDS_PLLCR0_DCBIAS_OUT_EN); 648 dcbias = in_be32(&srds_regs->bank[pll_num].pllsr2) & 649 SRDS_PLLSR2_DCBIAS; 650 dcbias >>= SRDS_PLLSR2_DCBIAS_SHIFT; 651 debug("values of bcap:%x, fcap:%x and dcbias:%x\n", 652 bcap, fcap, dcbias); 653 if (fcap == 0 && bcap == 1) { 654 /* Step 3 */ 655 clrbits_be32(&srds_regs->bank[pll_num].rstctl, 656 (SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B 657 | SRDS_RSTCTL_SDRST_B)); 658 clrbits_be32(&srds_regs->bank[pll_num].pllcr1, 659 SRDS_PLLCR1_BCAP_EN); 660 setbits_be32(&srds_regs->bank[pll_num].pllcr1, 661 SRDS_PLLCR1_BCAP_OVD); 662 if (calibrate_pll(srds_regs, pll_num)) { 663 /*save the fcap, dcbias and bcap values*/ 664 clrbits_be32(&srds_regs->bank[pll_num].pllcr0, 665 SRDS_PLLCR0_DCBIAS_OUT_EN); 666 fcap = in_be32(&srds_regs->bank[pll_num].pllsr2) 667 & SRDS_PLLSR2_FCAP; 668 fcap >>= SRDS_PLLSR2_FCAP_SHIFT; 669 bcap = in_be32(&srds_regs->bank[pll_num].pllsr2) 670 & SRDS_PLLSR2_BCAP_EN; 671 bcap >>= SRDS_PLLSR2_BCAP_EN_SHIFT; 672 setbits_be32(&srds_regs->bank[pll_num].pllcr0, 673 SRDS_PLLCR0_DCBIAS_OUT_EN); 674 dcbias = in_be32 675 (&srds_regs->bank[pll_num].pllsr2) & 676 SRDS_PLLSR2_DCBIAS; 677 dcbias >>= SRDS_PLLSR2_DCBIAS_SHIFT; 678 679 /* Step 4*/ 680 clrbits_be32(&srds_regs->bank[pll_num].rstctl, 681 (SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B 682 | SRDS_RSTCTL_SDRST_B)); 683 setbits_be32(&srds_regs->bank[pll_num].pllcr1, 684 SRDS_PLLCR1_BYP_CAL); 685 clrbits_be32(&srds_regs->bank[pll_num].pllcr1, 686 SRDS_PLLCR1_BCAP_EN); 687 setbits_be32(&srds_regs->bank[pll_num].pllcr1, 688 SRDS_PLLCR1_BCAP_OVD); 689 /* change the fcap and dcbias to the saved 690 * values from Step 3 */ 691 clrbits_be32(&srds_regs->bank[pll_num].pllcr1, 692 SRDS_PLLCR1_PLL_FCAP); 693 pllcr1 = (in_be32 694 (&srds_regs->bank[pll_num].pllcr1)| 695 (fcap << SRDS_PLLCR1_PLL_FCAP_SHIFT)); 696 out_be32(&srds_regs->bank[pll_num].pllcr1, 697 pllcr1); 698 clrbits_be32(&srds_regs->bank[pll_num].pllcr0, 699 SRDS_PLLCR0_DCBIAS_OVRD); 700 pllcr0 = (in_be32 701 (&srds_regs->bank[pll_num].pllcr0)| 702 (dcbias << SRDS_PLLCR0_DCBIAS_OVRD_SHIFT)); 703 out_be32(&srds_regs->bank[pll_num].pllcr0, 704 pllcr0); 705 ret = calibrate_pll(srds_regs, pll_num); 706 if (ret) 707 return ret; 708 } else { 709 goto out; 710 } 711 } else { /* Step 5 */ 712 clrbits_be32(&srds_regs->bank[pll_num].rstctl, 713 (SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B 714 | SRDS_RSTCTL_SDRST_B)); 715 udelay(10); 716 /* Change the fcap, dcbias, and bcap to the 717 * values from Step 1 */ 718 setbits_be32(&srds_regs->bank[pll_num].pllcr1, 719 SRDS_PLLCR1_BYP_CAL); 720 clrbits_be32(&srds_regs->bank[pll_num].pllcr1, 721 SRDS_PLLCR1_PLL_FCAP); 722 pllcr1 = (in_be32(&srds_regs->bank[pll_num].pllcr1)| 723 (fcap << SRDS_PLLCR1_PLL_FCAP_SHIFT)); 724 out_be32(&srds_regs->bank[pll_num].pllcr1, 725 pllcr1); 726 clrbits_be32(&srds_regs->bank[pll_num].pllcr0, 727 SRDS_PLLCR0_DCBIAS_OVRD); 728 pllcr0 = (in_be32(&srds_regs->bank[pll_num].pllcr0)| 729 (dcbias << SRDS_PLLCR0_DCBIAS_OVRD_SHIFT)); 730 out_be32(&srds_regs->bank[pll_num].pllcr0, 731 pllcr0); 732 clrbits_be32(&srds_regs->bank[pll_num].pllcr1, 733 SRDS_PLLCR1_BCAP_EN); 734 setbits_be32(&srds_regs->bank[pll_num].pllcr1, 735 SRDS_PLLCR1_BCAP_OVD); 736 ret = calibrate_pll(srds_regs, pll_num); 737 if (ret) 738 return ret; 739 } 740 } 741 out: 742 return 0; 743 } 744 745 static int check_serdes_pll_locks(void) 746 { 747 serdes_corenet_t *srds1_regs = 748 (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; 749 serdes_corenet_t *srds2_regs = 750 (void *)CONFIG_SYS_FSL_CORENET_SERDES2_ADDR; 751 int i, ret1, ret2; 752 753 debug("\nSerDes1 Lock check\n"); 754 for (i = 0; i < CONFIG_SYS_FSL_SRDS_NUM_PLLS; i++) { 755 ret1 = check_pll_locks(srds1_regs, i); 756 if (ret1) { 757 printf("SerDes1, PLL:%d didnt lock\n", i); 758 return ret1; 759 } 760 } 761 debug("\nSerDes2 Lock check\n"); 762 for (i = 0; i < CONFIG_SYS_FSL_SRDS_NUM_PLLS; i++) { 763 ret2 = check_pll_locks(srds2_regs, i); 764 if (ret2) { 765 printf("SerDes2, PLL:%d didnt lock\n", i); 766 return ret2; 767 } 768 } 769 770 return 0; 771 } 772 773 int config_serdes1_refclks(void) 774 { 775 ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 776 serdes_corenet_t *srds_regs = 777 (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; 778 u32 serdes1_prtcl, lane; 779 unsigned int flag_sgmii_aurora_prtcl = 0; 780 int i; 781 int ret = 0; 782 783 serdes1_prtcl = in_be32(&gur->rcwsr[4]) & 784 FSL_CORENET2_RCWSR4_SRDS1_PRTCL; 785 if (!serdes1_prtcl) { 786 printf("SERDES1 is not enabled\n"); 787 return -1; 788 } 789 serdes1_prtcl >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; 790 debug("Using SERDES1 Protocol: 0x%x:\n", serdes1_prtcl); 791 792 /* To prevent generation of reset request from SerDes 793 * while changing the refclks, By setting SRDS_RST_MSK bit, 794 * SerDes reset event cannot cause a reset request 795 */ 796 setbits_be32(&gur->rstrqmr1, FSL_CORENET_RSTRQMR1_SRDS_RST_MSK); 797 798 /* Reconfigure IDT idt8t49n222a device for CPRI to work 799 * For this SerDes1's Refclk1 and refclk2 need to be set 800 * to 122.88MHz 801 */ 802 switch (serdes1_prtcl) { 803 case 0x29: 804 case 0x2A: 805 case 0x2C: 806 case 0x2D: 807 case 0x2E: 808 case 0x01: 809 case 0x02: 810 case 0x04: 811 case 0x05: 812 case 0x06: 813 case 0x07: 814 case 0x08: 815 case 0x09: 816 case 0x0A: 817 case 0x0B: 818 case 0x0C: 819 case 0x2F: 820 case 0x30: 821 case 0x32: 822 case 0x33: 823 case 0x34: 824 case 0x39: 825 case 0x3A: 826 case 0x3C: 827 case 0x3D: 828 case 0x5C: 829 case 0x5D: 830 debug("Configuring idt8t49n222a for CPRI SerDes clks:" 831 " for srds_prctl:%x\n", serdes1_prtcl); 832 ret = select_i2c_ch_pca(I2C_CH_IDT); 833 if (!ret) { 834 ret = set_serdes_refclk(IDT_SERDES1_ADDRESS, 1, 835 SERDES_REFCLK_122_88, 836 SERDES_REFCLK_122_88, 0); 837 if (ret) { 838 printf("IDT8T49N222A configuration failed.\n"); 839 goto out; 840 } else 841 debug("IDT8T49N222A configured.\n"); 842 } else { 843 goto out; 844 } 845 select_i2c_ch_pca(I2C_CH_DEFAULT); 846 847 /* Change SerDes1's Refclk1 to 125MHz for on board 848 * SGMIIs or Aurora to work 849 */ 850 for (lane = 0; lane < SRDS_MAX_LANES; lane++) { 851 enum srds_prtcl lane_prtcl = serdes_get_prtcl 852 (0, serdes1_prtcl, lane); 853 switch (lane_prtcl) { 854 case SGMII_FM1_DTSEC1: 855 case SGMII_FM1_DTSEC2: 856 case SGMII_FM1_DTSEC3: 857 case SGMII_FM1_DTSEC4: 858 case SGMII_FM1_DTSEC5: 859 case SGMII_FM1_DTSEC6: 860 case AURORA: 861 flag_sgmii_aurora_prtcl++; 862 break; 863 default: 864 break; 865 } 866 } 867 868 if (flag_sgmii_aurora_prtcl) 869 QIXIS_WRITE(brdcfg[4], QIXIS_SRDS1CLK_125); 870 871 /* Steps For SerDes PLLs reset and reconfiguration after 872 * changing SerDes's refclks 873 */ 874 for (i = 0; i < CONFIG_SYS_FSL_SRDS_NUM_PLLS; i++) { 875 debug("For PLL%d reset and reconfiguration after" 876 " changing refclks\n", i+1); 877 clrbits_be32(&srds_regs->bank[i].rstctl, 878 SRDS_RSTCTL_SDRST_B); 879 udelay(10); 880 clrbits_be32(&srds_regs->bank[i].rstctl, 881 (SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B)); 882 udelay(10); 883 setbits_be32(&srds_regs->bank[i].rstctl, 884 SRDS_RSTCTL_RST); 885 setbits_be32(&srds_regs->bank[i].rstctl, 886 (SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B 887 | SRDS_RSTCTL_SDRST_B)); 888 } 889 break; 890 default: 891 printf("WARNING:IDT8T49N222A configuration not" 892 " supported for:%x SerDes1 Protocol.\n", 893 serdes1_prtcl); 894 } 895 896 out: 897 /* Clearing SRDS_RST_MSK bit as now 898 * SerDes reset event can cause a reset request 899 */ 900 clrbits_be32(&gur->rstrqmr1, FSL_CORENET_RSTRQMR1_SRDS_RST_MSK); 901 return ret; 902 } 903 904 int config_serdes2_refclks(void) 905 { 906 ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 907 serdes_corenet_t *srds2_regs = 908 (void *)CONFIG_SYS_FSL_CORENET_SERDES2_ADDR; 909 u32 serdes2_prtcl; 910 int ret = 0; 911 int i; 912 913 serdes2_prtcl = in_be32(&gur->rcwsr[4]) & 914 FSL_CORENET2_RCWSR4_SRDS2_PRTCL; 915 if (!serdes2_prtcl) { 916 debug("SERDES2 is not enabled\n"); 917 return -ENODEV; 918 } 919 serdes2_prtcl >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; 920 debug("Using SERDES2 Protocol: 0x%x:\n", serdes2_prtcl); 921 922 /* To prevent generation of reset request from SerDes 923 * while changing the refclks, By setting SRDS_RST_MSK bit, 924 * SerDes reset event cannot cause a reset request 925 */ 926 setbits_be32(&gur->rstrqmr1, FSL_CORENET_RSTRQMR1_SRDS_RST_MSK); 927 928 /* Reconfigure IDT idt8t49n222a device for PCIe SATA to work 929 * For this SerDes2's Refclk1 need to be set to 100MHz 930 */ 931 switch (serdes2_prtcl) { 932 #ifdef CONFIG_ARCH_B4420 933 case 0x9d: 934 #endif 935 case 0x9E: 936 case 0x9A: 937 /* fallthrough */ 938 case 0xb1: 939 case 0xb2: 940 debug("Configuring IDT for PCIe SATA for srds_prctl:%x\n", 941 serdes2_prtcl); 942 ret = select_i2c_ch_pca(I2C_CH_IDT); 943 if (!ret) { 944 ret = set_serdes_refclk(IDT_SERDES2_ADDRESS, 2, 945 SERDES_REFCLK_100, 946 SERDES_REFCLK_156_25, 0); 947 if (ret) { 948 printf("IDT8T49N222A configuration failed.\n"); 949 goto out; 950 } else 951 debug("IDT8T49N222A configured.\n"); 952 } else { 953 goto out; 954 } 955 select_i2c_ch_pca(I2C_CH_DEFAULT); 956 957 /* Steps For SerDes PLLs reset and reconfiguration after 958 * changing SerDes's refclks 959 */ 960 for (i = 0; i < CONFIG_SYS_FSL_SRDS_NUM_PLLS; i++) { 961 clrbits_be32(&srds2_regs->bank[i].rstctl, 962 SRDS_RSTCTL_SDRST_B); 963 udelay(10); 964 clrbits_be32(&srds2_regs->bank[i].rstctl, 965 (SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B)); 966 udelay(10); 967 setbits_be32(&srds2_regs->bank[i].rstctl, 968 SRDS_RSTCTL_RST); 969 setbits_be32(&srds2_regs->bank[i].rstctl, 970 (SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B 971 | SRDS_RSTCTL_SDRST_B)); 972 973 udelay(10); 974 } 975 break; 976 default: 977 printf("IDT configuration not supported for:%x S2 Protocol.\n", 978 serdes2_prtcl); 979 } 980 981 out: 982 /* Clearing SRDS_RST_MSK bit as now 983 * SerDes reset event can cause a reset request 984 */ 985 clrbits_be32(&gur->rstrqmr1, FSL_CORENET_RSTRQMR1_SRDS_RST_MSK); 986 return ret; 987 } 988 989 int board_early_init_r(void) 990 { 991 const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; 992 int flash_esel = find_tlb_idx((void *)flashbase, 1); 993 int ret; 994 u32 svr = SVR_SOC_VER(get_svr()); 995 996 /* Create law for MAPLE only for personalities having MAPLE */ 997 if ((svr == SVR_B4860) || (svr == SVR_B4440) || 998 (svr == SVR_B4420) || (svr == SVR_B4220)) { 999 set_next_law(CONFIG_SYS_MAPLE_MEM_PHYS, LAW_SIZE_16M, 1000 LAW_TRGT_IF_MAPLE); 1001 } 1002 1003 /* 1004 * Remap Boot flash + PROMJET region to caching-inhibited 1005 * so that flash can be erased properly. 1006 */ 1007 1008 /* Flush d-cache and invalidate i-cache of any FLASH data */ 1009 flush_dcache(); 1010 invalidate_icache(); 1011 1012 if (flash_esel == -1) { 1013 /* very unlikely unless something is messed up */ 1014 puts("Error: Could not find TLB for FLASH BASE\n"); 1015 flash_esel = 2; /* give our best effort to continue */ 1016 } else { 1017 /* invalidate existing TLB entry for flash + promjet */ 1018 disable_tlb(flash_esel); 1019 } 1020 1021 set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, 1022 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 1023 0, flash_esel, BOOKE_PAGESZ_256M, 1); 1024 1025 /* 1026 * Adjust core voltage according to voltage ID 1027 * This function changes I2C mux to channel 2. 1028 */ 1029 if (adjust_vdd(0) < 0) 1030 printf("Warning: Adjusting core voltage failed\n"); 1031 1032 /* SerDes1 refclks need to be set again, as default clks 1033 * are not suitable for CPRI and onboard SGMIIs to work 1034 * simultaneously. 1035 * This function will set SerDes1's Refclk1 and refclk2 1036 * as per SerDes1 protocols 1037 */ 1038 if (config_serdes1_refclks()) 1039 printf("SerDes1 Refclks couldn't set properly.\n"); 1040 else 1041 printf("SerDes1 Refclks have been set.\n"); 1042 1043 /* SerDes2 refclks need to be set again, as default clks 1044 * are not suitable for PCIe SATA to work 1045 * This function will set SerDes2's Refclk1 and refclk2 1046 * for SerDes2 protocols having PCIe in them 1047 * for PCIe SATA to work 1048 */ 1049 ret = config_serdes2_refclks(); 1050 if (!ret) 1051 printf("SerDes2 Refclks have been set.\n"); 1052 else if (ret == -ENODEV) 1053 printf("SerDes disable, Refclks couldn't change.\n"); 1054 else 1055 printf("SerDes2 Refclk reconfiguring failed.\n"); 1056 1057 #if defined(CONFIG_SYS_FSL_ERRATUM_A006384) || \ 1058 defined(CONFIG_SYS_FSL_ERRATUM_A006475) 1059 /* Rechecking the SerDes locks after all SerDes configurations 1060 * are done, As SerDes PLLs may not lock reliably at 5 G VCO 1061 * and at cold temperatures. 1062 * Following sequence ensure the proper locking of SerDes PLLs. 1063 */ 1064 if (SVR_MAJ(get_svr()) == 1) { 1065 if (check_serdes_pll_locks()) 1066 printf("SerDes plls still not locked properly.\n"); 1067 else 1068 printf("SerDes plls have been locked well.\n"); 1069 } 1070 #endif 1071 1072 /* Configure VSC3316 and VSC3308 crossbar switches */ 1073 if (configure_vsc3316_3308()) 1074 printf("VSC:failed to configure VSC3316/3308.\n"); 1075 else 1076 printf("VSC:VSC3316/3308 successfully configured.\n"); 1077 1078 select_i2c_ch_pca(I2C_CH_DEFAULT); 1079 1080 return 0; 1081 } 1082 1083 unsigned long get_board_sys_clk(void) 1084 { 1085 u8 sysclk_conf = QIXIS_READ(brdcfg[1]); 1086 1087 switch ((sysclk_conf & 0x0C) >> 2) { 1088 case QIXIS_CLK_100: 1089 return 100000000; 1090 case QIXIS_CLK_125: 1091 return 125000000; 1092 case QIXIS_CLK_133: 1093 return 133333333; 1094 } 1095 return 66666666; 1096 } 1097 1098 unsigned long get_board_ddr_clk(void) 1099 { 1100 u8 ddrclk_conf = QIXIS_READ(brdcfg[1]); 1101 1102 switch (ddrclk_conf & 0x03) { 1103 case QIXIS_CLK_100: 1104 return 100000000; 1105 case QIXIS_CLK_125: 1106 return 125000000; 1107 case QIXIS_CLK_133: 1108 return 133333333; 1109 } 1110 return 66666666; 1111 } 1112 1113 static int serdes_refclock(u8 sw, u8 sdclk) 1114 { 1115 unsigned int clock; 1116 int ret = -1; 1117 u8 brdcfg4; 1118 1119 if (sdclk == 1) { 1120 brdcfg4 = QIXIS_READ(brdcfg[4]); 1121 if ((brdcfg4 & CLK_MUX_SEL_MASK) == ETH_PHY_CLK_OUT) 1122 return SRDS_PLLCR0_RFCK_SEL_125; 1123 else 1124 clock = (sw >> 5) & 7; 1125 } else 1126 clock = (sw >> 6) & 3; 1127 1128 switch (clock) { 1129 case 0: 1130 ret = SRDS_PLLCR0_RFCK_SEL_100; 1131 break; 1132 case 1: 1133 ret = SRDS_PLLCR0_RFCK_SEL_125; 1134 break; 1135 case 2: 1136 ret = SRDS_PLLCR0_RFCK_SEL_156_25; 1137 break; 1138 case 3: 1139 ret = SRDS_PLLCR0_RFCK_SEL_161_13; 1140 break; 1141 case 4: 1142 case 5: 1143 case 6: 1144 ret = SRDS_PLLCR0_RFCK_SEL_122_88; 1145 break; 1146 default: 1147 ret = -1; 1148 break; 1149 } 1150 1151 return ret; 1152 } 1153 1154 #define NUM_SRDS_BANKS 2 1155 1156 int misc_init_r(void) 1157 { 1158 u8 sw; 1159 serdes_corenet_t *srds_regs = 1160 (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; 1161 u32 actual[NUM_SRDS_BANKS]; 1162 unsigned int i; 1163 int clock; 1164 1165 sw = QIXIS_READ(brdcfg[2]); 1166 clock = serdes_refclock(sw, 1); 1167 if (clock >= 0) 1168 actual[0] = clock; 1169 else 1170 printf("Warning: SDREFCLK1 switch setting is unsupported\n"); 1171 1172 sw = QIXIS_READ(brdcfg[4]); 1173 clock = serdes_refclock(sw, 2); 1174 if (clock >= 0) 1175 actual[1] = clock; 1176 else 1177 printf("Warning: SDREFCLK2 switch setting unsupported\n"); 1178 1179 for (i = 0; i < NUM_SRDS_BANKS; i++) { 1180 u32 pllcr0 = srds_regs->bank[i].pllcr0; 1181 u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK; 1182 if (expected != actual[i]) { 1183 printf("Warning: SERDES bank %u expects reference clock" 1184 " %sMHz, but actual is %sMHz\n", i + 1, 1185 serdes_clock_to_string(expected), 1186 serdes_clock_to_string(actual[i])); 1187 } 1188 } 1189 1190 return 0; 1191 } 1192 1193 int ft_board_setup(void *blob, bd_t *bd) 1194 { 1195 phys_addr_t base; 1196 phys_size_t size; 1197 1198 ft_cpu_setup(blob, bd); 1199 1200 base = env_get_bootm_low(); 1201 size = env_get_bootm_size(); 1202 1203 fdt_fixup_memory(blob, (u64)base, (u64)size); 1204 1205 #ifdef CONFIG_PCI 1206 pci_of_setup(blob, bd); 1207 #endif 1208 1209 fdt_fixup_liodn(blob); 1210 1211 #ifdef CONFIG_HAS_FSL_DR_USB 1212 fsl_fdt_fixup_dr_usb(blob, bd); 1213 #endif 1214 1215 #ifdef CONFIG_SYS_DPAA_FMAN 1216 fdt_fixup_fman_ethernet(blob); 1217 fdt_fixup_board_enet(blob); 1218 #endif 1219 1220 return 0; 1221 } 1222 1223 /* 1224 * Dump board switch settings. 1225 * The bits that cannot be read/sampled via some FPGA or some 1226 * registers, they will be displayed as 1227 * underscore in binary format. mask[] has those bits. 1228 * Some bits are calculated differently than the actual switches 1229 * if booting with overriding by FPGA. 1230 */ 1231 void qixis_dump_switch(void) 1232 { 1233 int i; 1234 u8 sw[5]; 1235 1236 /* 1237 * Any bit with 1 means that bit cannot be reverse engineered. 1238 * It will be displayed as _ in binary format. 1239 */ 1240 static const u8 mask[] = {0x07, 0, 0, 0xff, 0}; 1241 char buf[10]; 1242 u8 brdcfg[16], dutcfg[16]; 1243 1244 for (i = 0; i < 16; i++) { 1245 brdcfg[i] = qixis_read(offsetof(struct qixis, brdcfg[0]) + i); 1246 dutcfg[i] = qixis_read(offsetof(struct qixis, dutcfg[0]) + i); 1247 } 1248 1249 sw[0] = ((brdcfg[0] & 0x0f) << 4) | \ 1250 (brdcfg[9] & 0x08); 1251 sw[1] = ((dutcfg[1] & 0x01) << 7) | \ 1252 ((dutcfg[2] & 0x07) << 4) | \ 1253 ((dutcfg[6] & 0x10) >> 1) | \ 1254 ((dutcfg[6] & 0x80) >> 5) | \ 1255 ((dutcfg[1] & 0x40) >> 5) | \ 1256 (dutcfg[6] & 0x01); 1257 sw[2] = dutcfg[0]; 1258 sw[3] = 0; 1259 sw[4] = ((brdcfg[1] & 0x30) << 2) | \ 1260 ((brdcfg[1] & 0xc0) >> 2) | \ 1261 (brdcfg[1] & 0x0f); 1262 1263 puts("DIP switch settings:\n"); 1264 for (i = 0; i < 5; i++) { 1265 printf("SW%d = 0b%s (0x%02x)\n", 1266 i + 1, byte_to_binary_mask(sw[i], mask[i], buf), sw[i]); 1267 } 1268 } 1269