1 /* 2 * vme8349.c -- esd VME8349 board support 3 * 4 * Copyright (c) 2008-2009 esd gmbh. 5 * 6 * (C) Copyright 2006 7 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 8 * 9 * Reinhard Arlt <reinhard.arlt@esd-electronics.com> 10 * Based on board/mpc8349emds/mpc8349emds.c (and previous 834x releases.) 11 * 12 * SPDX-License-Identifier: GPL-2.0+ 13 */ 14 15 #include <common.h> 16 #include <ioports.h> 17 #include <mpc83xx.h> 18 #include <asm/mpc8349_pci.h> 19 #if defined(CONFIG_OF_LIBFDT) 20 #include <linux/libfdt.h> 21 #endif 22 #include <asm/io.h> 23 #include <asm/mmu.h> 24 #include <spd.h> 25 #include <spd_sdram.h> 26 #include <i2c.h> 27 #include <netdev.h> 28 29 DECLARE_GLOBAL_DATA_PTR; 30 31 void ddr_enable_ecc(unsigned int dram_size); 32 33 int dram_init(void) 34 { 35 volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; 36 u32 msize = 0; 37 38 if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) 39 return -ENXIO; 40 41 /* DDR SDRAM - Main memory */ 42 im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR; 43 44 msize = spd_sdram(); 45 46 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) 47 /* 48 * Initialize and enable DDR ECC. 49 */ 50 ddr_enable_ecc(msize * 1024 * 1024); 51 #endif 52 53 /* Now check memory size (after ECC is initialized) */ 54 msize = get_ram_size(0, msize); 55 56 /* return total bus SDRAM size(bytes) -- DDR */ 57 gd->ram_size = msize * 1024 * 1024; 58 59 return 0; 60 } 61 62 int checkboard(void) 63 { 64 #ifdef VME_CADDY2 65 puts("Board: esd VME-CADDY/2\n"); 66 #else 67 puts("Board: esd VME-CPU/8349\n"); 68 #endif 69 70 return 0; 71 } 72 73 #ifdef VME_CADDY2 74 int board_eth_init(bd_t *bis) 75 { 76 return pci_eth_init(bis); 77 } 78 #endif 79 80 #if defined(CONFIG_OF_BOARD_SETUP) 81 int ft_board_setup(void *blob, bd_t *bd) 82 { 83 ft_cpu_setup(blob, bd); 84 85 #ifdef CONFIG_PCI 86 ft_pci_setup(blob, bd); 87 #endif 88 89 return 0; 90 } 91 #endif 92 93 int misc_init_r() 94 { 95 immap_t *im = (immap_t *)CONFIG_SYS_IMMR; 96 97 clrsetbits_be32(&im->im_lbc.lcrr, LBCR_LDIS, 0); 98 99 return 0; 100 } 101 102 /* 103 * Provide SPD values for spd_sdram(). Both boards (VME-CADDY/2 104 * and VME-CADDY/2) have different SDRAM configurations. 105 */ 106 #ifdef VME_CADDY2 107 #define SMALL_RAM 0xff 108 #define LARGE_RAM 0x00 109 #else 110 #define SMALL_RAM 0x00 111 #define LARGE_RAM 0xff 112 #endif 113 114 #define SPD_VAL(a, b) (((a) & SMALL_RAM) | ((b) & LARGE_RAM)) 115 116 static spd_eeprom_t default_spd_eeprom = { 117 SPD_VAL(0x80, 0x80), /* 00 use 128 Bytes */ 118 SPD_VAL(0x07, 0x07), /* 01 use 128 Bytes */ 119 SPD_MEMTYPE_DDR2, /* 02 type is DDR2 */ 120 SPD_VAL(0x0d, 0x0d), /* 03 rows: 13 */ 121 SPD_VAL(0x09, 0x0a), /* 04 cols: 9 / 10 */ 122 SPD_VAL(0x00, 0x00), /* 05 */ 123 SPD_VAL(0x40, 0x40), /* 06 */ 124 SPD_VAL(0x00, 0x00), /* 07 */ 125 SPD_VAL(0x05, 0x05), /* 08 */ 126 SPD_VAL(0x30, 0x30), /* 09 */ 127 SPD_VAL(0x45, 0x45), /* 10 */ 128 SPD_VAL(0x02, 0x02), /* 11 ecc used */ 129 SPD_VAL(0x82, 0x82), /* 12 */ 130 SPD_VAL(0x10, 0x10), /* 13 */ 131 SPD_VAL(0x08, 0x08), /* 14 */ 132 SPD_VAL(0x00, 0x00), /* 15 */ 133 SPD_VAL(0x0c, 0x0c), /* 16 */ 134 SPD_VAL(0x04, 0x08), /* 17 banks: 4 / 8 */ 135 SPD_VAL(0x38, 0x38), /* 18 */ 136 SPD_VAL(0x00, 0x00), /* 19 */ 137 SPD_VAL(0x02, 0x02), /* 20 */ 138 SPD_VAL(0x00, 0x00), /* 21 */ 139 SPD_VAL(0x03, 0x03), /* 22 */ 140 SPD_VAL(0x3d, 0x3d), /* 23 */ 141 SPD_VAL(0x45, 0x45), /* 24 */ 142 SPD_VAL(0x50, 0x50), /* 25 */ 143 SPD_VAL(0x45, 0x45), /* 26 */ 144 SPD_VAL(0x3c, 0x3c), /* 27 */ 145 SPD_VAL(0x28, 0x28), /* 28 */ 146 SPD_VAL(0x3c, 0x3c), /* 29 */ 147 SPD_VAL(0x2d, 0x2d), /* 30 */ 148 SPD_VAL(0x20, 0x80), /* 31 */ 149 SPD_VAL(0x20, 0x20), /* 32 */ 150 SPD_VAL(0x27, 0x27), /* 33 */ 151 SPD_VAL(0x10, 0x10), /* 34 */ 152 SPD_VAL(0x17, 0x17), /* 35 */ 153 SPD_VAL(0x3c, 0x3c), /* 36 */ 154 SPD_VAL(0x1e, 0x1e), /* 37 */ 155 SPD_VAL(0x1e, 0x1e), /* 38 */ 156 SPD_VAL(0x00, 0x00), /* 39 */ 157 SPD_VAL(0x00, 0x06), /* 40 */ 158 SPD_VAL(0x37, 0x37), /* 41 */ 159 SPD_VAL(0x4b, 0x7f), /* 42 */ 160 SPD_VAL(0x80, 0x80), /* 43 */ 161 SPD_VAL(0x18, 0x18), /* 44 */ 162 SPD_VAL(0x22, 0x22), /* 45 */ 163 SPD_VAL(0x00, 0x00), /* 46 */ 164 { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, 165 SPD_VAL(0x10, 0x10), /* 62 */ 166 SPD_VAL(0x7e, 0x1d), /* 63 */ 167 { 'e', 's', 'd', '-', 'g', 'm', 'b', 'h' }, 168 SPD_VAL(0x00, 0x00), /* 72 */ 169 #ifdef VME_CADDY2 170 { "vme-caddy/2 ram " } 171 #else 172 { "vme-cpu/2 ram " } 173 #endif 174 }; 175 176 int vme8349_read_spd(uchar chip, uint addr, int alen, uchar *buffer, int len) 177 { 178 int old_bus = i2c_get_bus_num(); 179 unsigned int l, sum; 180 int valid = 0; 181 182 i2c_set_bus_num(0); 183 184 if (i2c_read(chip, addr, alen, buffer, len) == 0) 185 if (memcmp(&buffer[64], &default_spd_eeprom.mid[0], 8) == 0) { 186 sum = 0; 187 for (l = 0; l < 63; l++) 188 sum = (sum + buffer[l]) & 0xff; 189 if (sum == buffer[63]) 190 valid = 1; 191 else 192 printf("Invalid checksum in EEPROM %02x %02x\n", 193 sum, buffer[63]); 194 } 195 196 if (valid == 0) { 197 memcpy(buffer, (void *)&default_spd_eeprom, len); 198 sum = 0; 199 for (l = 0; l < 63; l++) 200 sum = (sum + buffer[l]) & 0xff; 201 if (sum != buffer[63]) 202 printf("Invalid checksum in FLASH %02x %02x\n", 203 sum, buffer[63]); 204 buffer[63] = sum; 205 } 206 207 i2c_set_bus_num(old_bus); 208 209 return 0; 210 } 211