1 /* 2 * Copyright (C) 2014 Eukréa Electromatique 3 * Author: Eric Bénard <eric@eukrea.com> 4 * Fabio Estevam <fabio.estevam@freescale.com> 5 * Jon Nettleton <jon.nettleton@gmail.com> 6 * 7 * based on sabresd.c which is : 8 * Copyright (C) 2012 Freescale Semiconductor, Inc. 9 * and on hummingboard.c which is : 10 * Copyright (C) 2013 SolidRun ltd. 11 * Copyright (C) 2013 Jon Nettleton <jon.nettleton@gmail.com>. 12 * 13 * SPDX-License-Identifier: GPL-2.0+ 14 */ 15 16 #include <asm/arch/clock.h> 17 #include <asm/arch/sys_proto.h> 18 #include <asm/arch/imx-regs.h> 19 #include <asm/arch/iomux.h> 20 #include <asm/arch/mx6-pins.h> 21 #include <asm/errno.h> 22 #include <asm/gpio.h> 23 #include <asm/imx-common/iomux-v3.h> 24 #include <asm/imx-common/boot_mode.h> 25 #include <asm/imx-common/mxc_i2c.h> 26 #include <asm/imx-common/spi.h> 27 #include <asm/imx-common/video.h> 28 #include <i2c.h> 29 #include <mmc.h> 30 #include <fsl_esdhc.h> 31 #include <miiphy.h> 32 #include <netdev.h> 33 #include <asm/arch/mxc_hdmi.h> 34 #include <asm/arch/crm_regs.h> 35 #include <linux/fb.h> 36 #include <ipu_pixfmt.h> 37 #include <asm/io.h> 38 #include <asm/arch/sys_proto.h> 39 DECLARE_GLOBAL_DATA_PTR; 40 41 #define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ 42 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ 43 PAD_CTL_SRE_FAST | PAD_CTL_HYS) 44 45 #define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ 46 PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \ 47 PAD_CTL_SRE_FAST | PAD_CTL_HYS) 48 49 #define USDHC_PAD_CLK_CTRL (PAD_CTL_SPEED_LOW | \ 50 PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | \ 51 PAD_CTL_HYS) 52 53 #define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ 54 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) 55 56 #define ENET_PAD_CTRL_PD (PAD_CTL_PUS_100K_DOWN | \ 57 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) 58 59 #define ENET_PAD_CTRL_CLK ((PAD_CTL_PUS_100K_UP & ~PAD_CTL_PKE) | \ 60 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) 61 62 #define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ 63 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ 64 PAD_CTL_ODE | PAD_CTL_SRE_FAST) 65 66 #define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \ 67 PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) 68 69 static int board_type = -1; 70 #define BOARD_IS_MARSBOARD 0 71 #define BOARD_IS_RIOTBOARD 1 72 73 int dram_init(void) 74 { 75 gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); 76 77 return 0; 78 } 79 80 static iomux_v3_cfg_t const uart2_pads[] = { 81 MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), 82 MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), 83 }; 84 85 static void setup_iomux_uart(void) 86 { 87 imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads)); 88 } 89 90 iomux_v3_cfg_t const enet_pads[] = { 91 MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), 92 MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), 93 /* GPIO16 -> AR8035 25MHz */ 94 MX6_PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(NO_PAD_CTRL), 95 MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(NO_PAD_CTRL), 96 MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), 97 MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), 98 MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), 99 MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), 100 MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), 101 /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */ 102 MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL_CLK), 103 MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), 104 MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD), 105 MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD), 106 MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), 107 MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), 108 MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL_PD), 109 /* AR8035 PHY Reset */ 110 MX6_PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD), 111 /* AR8035 PHY Interrupt */ 112 MX6_PAD_ENET_TX_EN__GPIO1_IO28 | MUX_PAD_CTRL(ENET_PAD_CTRL), 113 }; 114 115 static void setup_iomux_enet(void) 116 { 117 imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads)); 118 119 /* Reset AR8035 PHY */ 120 gpio_direction_output(IMX_GPIO_NR(3, 31) , 0); 121 mdelay(2); 122 gpio_set_value(IMX_GPIO_NR(3, 31), 1); 123 } 124 125 int mx6_rgmii_rework(struct phy_device *phydev) 126 { 127 /* from linux/arch/arm/mach-imx/mach-imx6q.c : 128 * Ar803x phy SmartEEE feature cause link status generates glitch, 129 * which cause ethernet link down/up issue, so disable SmartEEE 130 */ 131 phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7); 132 phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x805d); 133 phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4003); 134 135 return 0; 136 } 137 138 int board_phy_config(struct phy_device *phydev) 139 { 140 mx6_rgmii_rework(phydev); 141 142 if (phydev->drv->config) 143 phydev->drv->config(phydev); 144 145 return 0; 146 } 147 148 iomux_v3_cfg_t const usdhc2_pads[] = { 149 MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CLK_CTRL), 150 MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), 151 MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 152 MX6_PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 153 MX6_PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 154 MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 155 MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), /* WP */ 156 MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ 157 }; 158 159 iomux_v3_cfg_t const usdhc3_pads[] = { 160 MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CLK_CTRL), 161 MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), 162 MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 163 MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 164 MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 165 MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 166 }; 167 168 iomux_v3_cfg_t const riotboard_usdhc3_pads[] = { 169 MX6_PAD_SD3_DAT4__GPIO7_IO01 | MUX_PAD_CTRL(NO_PAD_CTRL), /* WP */ 170 MX6_PAD_SD3_DAT5__GPIO7_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ 171 }; 172 173 iomux_v3_cfg_t const usdhc4_pads[] = { 174 MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CLK_CTRL), 175 MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), 176 MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 177 MX6_PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 178 MX6_PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 179 MX6_PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 180 /* eMMC RST */ 181 MX6_PAD_NANDF_ALE__GPIO6_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL), 182 }; 183 184 #ifdef CONFIG_FSL_ESDHC 185 struct fsl_esdhc_cfg usdhc_cfg[3] = { 186 {USDHC2_BASE_ADDR}, 187 {USDHC3_BASE_ADDR}, 188 {USDHC4_BASE_ADDR}, 189 }; 190 191 #define USDHC2_CD_GPIO IMX_GPIO_NR(1, 4) 192 #define USDHC3_CD_GPIO IMX_GPIO_NR(7, 0) 193 194 int board_mmc_getcd(struct mmc *mmc) 195 { 196 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; 197 int ret = 0; 198 199 switch (cfg->esdhc_base) { 200 case USDHC2_BASE_ADDR: 201 ret = !gpio_get_value(USDHC2_CD_GPIO); 202 break; 203 case USDHC3_BASE_ADDR: 204 if (board_type == BOARD_IS_RIOTBOARD) 205 ret = !gpio_get_value(USDHC3_CD_GPIO); 206 else if (board_type == BOARD_IS_MARSBOARD) 207 ret = 1; /* eMMC/uSDHC3 is always present */ 208 break; 209 case USDHC4_BASE_ADDR: 210 ret = 1; /* eMMC/uSDHC4 is always present */ 211 break; 212 } 213 214 return ret; 215 } 216 217 int board_mmc_init(bd_t *bis) 218 { 219 int ret; 220 int i; 221 222 /* 223 * According to the board_mmc_init() the following map is done: 224 * (U-Boot device node) (Physical Port) 225 * ** RiOTboard : 226 * mmc0 SDCard slot (bottom) 227 * mmc1 uSDCard slot (top) 228 * mmc2 eMMC 229 * ** MarSBoard : 230 * mmc0 uSDCard slot (bottom) 231 * mmc1 eMMC 232 */ 233 for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { 234 switch (i) { 235 case 0: 236 imx_iomux_v3_setup_multiple_pads( 237 usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); 238 gpio_direction_input(USDHC2_CD_GPIO); 239 usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); 240 usdhc_cfg[0].max_bus_width = 4; 241 break; 242 case 1: 243 imx_iomux_v3_setup_multiple_pads( 244 usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); 245 if (board_type == BOARD_IS_RIOTBOARD) { 246 imx_iomux_v3_setup_multiple_pads( 247 riotboard_usdhc3_pads, 248 ARRAY_SIZE(riotboard_usdhc3_pads)); 249 gpio_direction_input(USDHC3_CD_GPIO); 250 } else { 251 gpio_direction_output(IMX_GPIO_NR(7, 8) , 0); 252 udelay(250); 253 gpio_set_value(IMX_GPIO_NR(7, 8), 1); 254 } 255 usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); 256 usdhc_cfg[1].max_bus_width = 4; 257 break; 258 case 2: 259 imx_iomux_v3_setup_multiple_pads( 260 usdhc4_pads, ARRAY_SIZE(usdhc4_pads)); 261 usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); 262 usdhc_cfg[2].max_bus_width = 4; 263 gpio_direction_output(IMX_GPIO_NR(6, 8) , 0); 264 udelay(250); 265 gpio_set_value(IMX_GPIO_NR(6, 8), 1); 266 break; 267 default: 268 printf("Warning: you configured more USDHC controllers" 269 "(%d) then supported by the board (%d)\n", 270 i + 1, CONFIG_SYS_FSL_USDHC_NUM); 271 return -EINVAL; 272 } 273 274 ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); 275 if (ret) 276 return ret; 277 } 278 279 return 0; 280 } 281 #endif 282 283 #ifdef CONFIG_MXC_SPI 284 iomux_v3_cfg_t const ecspi1_pads[] = { 285 MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL), 286 MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL), 287 MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL), 288 MX6_PAD_EIM_EB2__GPIO2_IO30 | MUX_PAD_CTRL(NO_PAD_CTRL), 289 }; 290 291 int board_spi_cs_gpio(unsigned bus, unsigned cs) 292 { 293 return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(2, 30)) : -1; 294 } 295 296 static void setup_spi(void) 297 { 298 imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads)); 299 } 300 #endif 301 302 struct i2c_pads_info i2c_pad_info1 = { 303 .scl = { 304 .i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL 305 | MUX_PAD_CTRL(I2C_PAD_CTRL), 306 .gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27 307 | MUX_PAD_CTRL(I2C_PAD_CTRL), 308 .gp = IMX_GPIO_NR(5, 27) 309 }, 310 .sda = { 311 .i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA 312 | MUX_PAD_CTRL(I2C_PAD_CTRL), 313 .gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26 314 | MUX_PAD_CTRL(I2C_PAD_CTRL), 315 .gp = IMX_GPIO_NR(5, 26) 316 } 317 }; 318 319 struct i2c_pads_info i2c_pad_info2 = { 320 .scl = { 321 .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL 322 | MUX_PAD_CTRL(I2C_PAD_CTRL), 323 .gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 324 | MUX_PAD_CTRL(I2C_PAD_CTRL), 325 .gp = IMX_GPIO_NR(4, 12) 326 }, 327 .sda = { 328 .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA 329 | MUX_PAD_CTRL(I2C_PAD_CTRL), 330 .gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13 331 | MUX_PAD_CTRL(I2C_PAD_CTRL), 332 .gp = IMX_GPIO_NR(4, 13) 333 } 334 }; 335 336 struct i2c_pads_info i2c_pad_info3 = { 337 .scl = { 338 .i2c_mode = MX6_PAD_GPIO_5__I2C3_SCL 339 | MUX_PAD_CTRL(I2C_PAD_CTRL), 340 .gpio_mode = MX6_PAD_GPIO_5__GPIO1_IO05 341 | MUX_PAD_CTRL(I2C_PAD_CTRL), 342 .gp = IMX_GPIO_NR(1, 5) 343 }, 344 .sda = { 345 .i2c_mode = MX6_PAD_GPIO_6__I2C3_SDA 346 | MUX_PAD_CTRL(I2C_PAD_CTRL), 347 .gpio_mode = MX6_PAD_GPIO_6__GPIO1_IO06 348 | MUX_PAD_CTRL(I2C_PAD_CTRL), 349 .gp = IMX_GPIO_NR(1, 6) 350 } 351 }; 352 353 iomux_v3_cfg_t const tft_pads_riot[] = { 354 /* LCD_PWR_EN */ 355 MX6_PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL), 356 /* TOUCH_INT */ 357 MX6_PAD_NANDF_CS1__GPIO6_IO14 | MUX_PAD_CTRL(NO_PAD_CTRL), 358 /* LED_PWR_EN */ 359 MX6_PAD_NANDF_CS2__GPIO6_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL), 360 /* BL LEVEL */ 361 MX6_PAD_SD1_CMD__GPIO1_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL), 362 }; 363 364 iomux_v3_cfg_t const tft_pads_mars[] = { 365 /* LCD_PWR_EN */ 366 MX6_PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL), 367 /* TOUCH_INT */ 368 MX6_PAD_NANDF_CS1__GPIO6_IO14 | MUX_PAD_CTRL(NO_PAD_CTRL), 369 /* LED_PWR_EN */ 370 MX6_PAD_NANDF_CS2__GPIO6_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL), 371 /* BL LEVEL (PWM4) */ 372 MX6_PAD_SD4_DAT2__GPIO2_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL), 373 }; 374 375 #if defined(CONFIG_VIDEO_IPUV3) 376 377 static void enable_lvds(struct display_info_t const *dev) 378 { 379 struct iomuxc *iomux = (struct iomuxc *) 380 IOMUXC_BASE_ADDR; 381 setbits_le32(&iomux->gpr[2], 382 IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT); 383 /* set backlight level to ON */ 384 if (board_type == BOARD_IS_RIOTBOARD) 385 gpio_direction_output(IMX_GPIO_NR(1, 18) , 1); 386 else if (board_type == BOARD_IS_MARSBOARD) 387 gpio_direction_output(IMX_GPIO_NR(2, 10) , 1); 388 } 389 390 static void disable_lvds(struct display_info_t const *dev) 391 { 392 struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; 393 394 /* set backlight level to OFF */ 395 if (board_type == BOARD_IS_RIOTBOARD) 396 gpio_direction_output(IMX_GPIO_NR(1, 18) , 0); 397 else if (board_type == BOARD_IS_MARSBOARD) 398 gpio_direction_output(IMX_GPIO_NR(2, 10) , 0); 399 400 clrbits_le32(&iomux->gpr[2], 401 IOMUXC_GPR2_LVDS_CH0_MODE_MASK); 402 } 403 404 static void do_enable_hdmi(struct display_info_t const *dev) 405 { 406 disable_lvds(dev); 407 imx_enable_hdmi_phy(); 408 } 409 410 static int detect_i2c(struct display_info_t const *dev) 411 { 412 return (0 == i2c_set_bus_num(dev->bus)) && 413 (0 == i2c_probe(dev->addr)); 414 } 415 416 struct display_info_t const displays[] = {{ 417 .bus = -1, 418 .addr = 0, 419 .pixfmt = IPU_PIX_FMT_RGB24, 420 .detect = detect_hdmi, 421 .enable = do_enable_hdmi, 422 .mode = { 423 .name = "HDMI", 424 .refresh = 60, 425 .xres = 1024, 426 .yres = 768, 427 .pixclock = 15385, 428 .left_margin = 220, 429 .right_margin = 40, 430 .upper_margin = 21, 431 .lower_margin = 7, 432 .hsync_len = 60, 433 .vsync_len = 10, 434 .sync = FB_SYNC_EXT, 435 .vmode = FB_VMODE_NONINTERLACED 436 } }, { 437 .bus = 2, 438 .addr = 0x1, 439 .pixfmt = IPU_PIX_FMT_LVDS666, 440 .detect = detect_i2c, 441 .enable = enable_lvds, 442 .mode = { 443 .name = "LCD8000-97C", 444 .refresh = 60, 445 .xres = 1024, 446 .yres = 768, 447 .pixclock = 15385, 448 .left_margin = 100, 449 .right_margin = 200, 450 .upper_margin = 10, 451 .lower_margin = 20, 452 .hsync_len = 20, 453 .vsync_len = 8, 454 .sync = FB_SYNC_EXT, 455 .vmode = FB_VMODE_NONINTERLACED 456 } } }; 457 size_t display_count = ARRAY_SIZE(displays); 458 459 static void setup_display(void) 460 { 461 struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; 462 struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; 463 int reg; 464 465 enable_ipu_clock(); 466 imx_setup_hdmi(); 467 468 /* Turn on LDB0, IPU,IPU DI0 clocks */ 469 setbits_le32(&mxc_ccm->CCGR3, 470 MXC_CCM_CCGR3_LDB_DI0_MASK); 471 472 /* set LDB0 clk select to 011/011 */ 473 clrsetbits_le32(&mxc_ccm->cs2cdr, 474 MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK, 475 (3 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)); 476 477 setbits_le32(&mxc_ccm->cscmr2, 478 MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV); 479 480 setbits_le32(&mxc_ccm->chsccdr, 481 (CHSCCDR_CLK_SEL_LDB_DI0 482 << MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET)); 483 484 reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES 485 | IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW 486 | IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG 487 | IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT 488 | IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG 489 | IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT 490 | IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED 491 | IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0; 492 writel(reg, &iomux->gpr[2]); 493 494 clrsetbits_le32(&iomux->gpr[3], 495 IOMUXC_GPR3_LVDS0_MUX_CTL_MASK | 496 IOMUXC_GPR3_HDMI_MUX_CTL_MASK, 497 IOMUXC_GPR3_MUX_SRC_IPU1_DI0 498 << IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET); 499 } 500 #endif /* CONFIG_VIDEO_IPUV3 */ 501 502 /* 503 * Do not overwrite the console 504 * Use always serial for U-Boot console 505 */ 506 int overwrite_console(void) 507 { 508 return 1; 509 } 510 511 int board_eth_init(bd_t *bis) 512 { 513 setup_iomux_enet(); 514 515 return cpu_eth_init(bis); 516 } 517 518 int board_early_init_f(void) 519 { 520 u32 cputype = cpu_type(get_cpu_rev()); 521 522 switch (cputype) { 523 case MXC_CPU_MX6SOLO: 524 board_type = BOARD_IS_RIOTBOARD; 525 break; 526 case MXC_CPU_MX6D: 527 board_type = BOARD_IS_MARSBOARD; 528 break; 529 } 530 531 setup_iomux_uart(); 532 533 if (board_type == BOARD_IS_RIOTBOARD) 534 imx_iomux_v3_setup_multiple_pads( 535 tft_pads_riot, ARRAY_SIZE(tft_pads_riot)); 536 else if (board_type == BOARD_IS_MARSBOARD) 537 imx_iomux_v3_setup_multiple_pads( 538 tft_pads_mars, ARRAY_SIZE(tft_pads_mars)); 539 #if defined(CONFIG_VIDEO_IPUV3) 540 /* power ON LCD */ 541 gpio_direction_output(IMX_GPIO_NR(1, 29) , 1); 542 /* touch interrupt is an input */ 543 gpio_direction_input(IMX_GPIO_NR(6, 14)); 544 /* power ON backlight */ 545 gpio_direction_output(IMX_GPIO_NR(6, 15) , 1); 546 /* set backlight level to off */ 547 if (board_type == BOARD_IS_RIOTBOARD) 548 gpio_direction_output(IMX_GPIO_NR(1, 18) , 0); 549 else if (board_type == BOARD_IS_MARSBOARD) 550 gpio_direction_output(IMX_GPIO_NR(2, 10) , 0); 551 setup_display(); 552 #endif 553 554 return 0; 555 } 556 557 int board_init(void) 558 { 559 /* address of boot parameters */ 560 gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; 561 /* i2c1 : PMIC, Audio codec on RiOT, Expansion connector on MarS */ 562 setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); 563 /* i2c2 : HDMI EDID */ 564 setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); 565 /* i2c3 : LVDS, Expansion connector */ 566 setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3); 567 #ifdef CONFIG_MXC_SPI 568 setup_spi(); 569 #endif 570 return 0; 571 } 572 573 #ifdef CONFIG_CMD_BMODE 574 static const struct boot_mode riotboard_boot_modes[] = { 575 {"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)}, 576 {"sd3", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)}, 577 {"emmc", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)}, 578 {NULL, 0}, 579 }; 580 static const struct boot_mode marsboard_boot_modes[] = { 581 {"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)}, 582 {"emmc", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)}, 583 {NULL, 0}, 584 }; 585 #endif 586 587 int board_late_init(void) 588 { 589 #ifdef CONFIG_CMD_BMODE 590 if (board_type == BOARD_IS_RIOTBOARD) 591 add_board_boot_modes(riotboard_boot_modes); 592 else if (board_type == BOARD_IS_RIOTBOARD) 593 add_board_boot_modes(marsboard_boot_modes); 594 #endif 595 596 return 0; 597 } 598 599 int checkboard(void) 600 { 601 puts("Board: "); 602 if (board_type == BOARD_IS_MARSBOARD) 603 puts("MarSBoard\n"); 604 else if (board_type == BOARD_IS_RIOTBOARD) 605 puts("RIoTboard\n"); 606 else 607 printf("unknown - cputype : %02x\n", cpu_type(get_cpu_rev())); 608 609 return 0; 610 } 611