1 /* 2 * Copyright (C) 2014 Eukréa Electromatique 3 * Author: Eric Bénard <eric@eukrea.com> 4 * Fabio Estevam <fabio.estevam@freescale.com> 5 * Jon Nettleton <jon.nettleton@gmail.com> 6 * 7 * based on sabresd.c which is : 8 * Copyright (C) 2012 Freescale Semiconductor, Inc. 9 * and on hummingboard.c which is : 10 * Copyright (C) 2013 SolidRun ltd. 11 * Copyright (C) 2013 Jon Nettleton <jon.nettleton@gmail.com>. 12 * 13 * SPDX-License-Identifier: GPL-2.0+ 14 */ 15 16 #include <asm/arch/clock.h> 17 #include <asm/arch/sys_proto.h> 18 #include <asm/arch/imx-regs.h> 19 #include <asm/arch/iomux.h> 20 #include <asm/arch/mx6-pins.h> 21 #include <linux/errno.h> 22 #include <asm/gpio.h> 23 #include <asm/mach-imx/iomux-v3.h> 24 #include <asm/mach-imx/boot_mode.h> 25 #include <asm/mach-imx/mxc_i2c.h> 26 #include <asm/mach-imx/spi.h> 27 #include <asm/mach-imx/video.h> 28 #include <i2c.h> 29 #include <input.h> 30 #include <mmc.h> 31 #include <fsl_esdhc.h> 32 #include <miiphy.h> 33 #include <netdev.h> 34 #include <asm/arch/mxc_hdmi.h> 35 #include <asm/arch/crm_regs.h> 36 #include <linux/fb.h> 37 #include <ipu_pixfmt.h> 38 #include <asm/io.h> 39 #include <asm/arch/sys_proto.h> 40 DECLARE_GLOBAL_DATA_PTR; 41 42 #define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ 43 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ 44 PAD_CTL_SRE_FAST | PAD_CTL_HYS) 45 46 #define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ 47 PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \ 48 PAD_CTL_SRE_FAST | PAD_CTL_HYS) 49 50 #define USDHC_PAD_CLK_CTRL (PAD_CTL_SPEED_LOW | \ 51 PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | \ 52 PAD_CTL_HYS) 53 54 #define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ 55 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) 56 57 #define ENET_PAD_CTRL_PD (PAD_CTL_PUS_100K_DOWN | \ 58 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) 59 60 #define ENET_PAD_CTRL_CLK ((PAD_CTL_PUS_100K_UP & ~PAD_CTL_PKE) | \ 61 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) 62 63 #define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ 64 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ 65 PAD_CTL_ODE | PAD_CTL_SRE_FAST) 66 67 #define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \ 68 PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) 69 70 static int board_type = -1; 71 #define BOARD_IS_MARSBOARD 0 72 #define BOARD_IS_RIOTBOARD 1 73 74 int dram_init(void) 75 { 76 gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); 77 78 return 0; 79 } 80 81 static iomux_v3_cfg_t const uart2_pads[] = { 82 MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), 83 MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), 84 }; 85 86 static void setup_iomux_uart(void) 87 { 88 imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads)); 89 } 90 91 iomux_v3_cfg_t const enet_pads[] = { 92 MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), 93 MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), 94 /* GPIO16 -> AR8035 25MHz */ 95 MX6_PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(NO_PAD_CTRL), 96 MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(NO_PAD_CTRL), 97 MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), 98 MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), 99 MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), 100 MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), 101 MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), 102 /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */ 103 MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL_CLK), 104 MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), 105 MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD), 106 MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD), 107 MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), 108 MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), 109 MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL_PD), 110 /* AR8035 PHY Reset */ 111 MX6_PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD), 112 /* AR8035 PHY Interrupt */ 113 MX6_PAD_ENET_TX_EN__GPIO1_IO28 | MUX_PAD_CTRL(ENET_PAD_CTRL), 114 }; 115 116 static void setup_iomux_enet(void) 117 { 118 imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads)); 119 120 /* Reset AR8035 PHY */ 121 gpio_direction_output(IMX_GPIO_NR(3, 31) , 0); 122 mdelay(2); 123 gpio_set_value(IMX_GPIO_NR(3, 31), 1); 124 } 125 126 int mx6_rgmii_rework(struct phy_device *phydev) 127 { 128 /* from linux/arch/arm/mach-imx/mach-imx6q.c : 129 * Ar803x phy SmartEEE feature cause link status generates glitch, 130 * which cause ethernet link down/up issue, so disable SmartEEE 131 */ 132 phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7); 133 phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x805d); 134 phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4003); 135 136 return 0; 137 } 138 139 int board_phy_config(struct phy_device *phydev) 140 { 141 mx6_rgmii_rework(phydev); 142 143 if (phydev->drv->config) 144 phydev->drv->config(phydev); 145 146 return 0; 147 } 148 149 iomux_v3_cfg_t const usdhc2_pads[] = { 150 MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CLK_CTRL), 151 MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), 152 MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 153 MX6_PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 154 MX6_PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 155 MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 156 MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), /* WP */ 157 MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ 158 }; 159 160 iomux_v3_cfg_t const usdhc3_pads[] = { 161 MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CLK_CTRL), 162 MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), 163 MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 164 MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 165 MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 166 MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 167 }; 168 169 iomux_v3_cfg_t const riotboard_usdhc3_pads[] = { 170 MX6_PAD_SD3_DAT4__GPIO7_IO01 | MUX_PAD_CTRL(NO_PAD_CTRL), /* WP */ 171 MX6_PAD_SD3_DAT5__GPIO7_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ 172 }; 173 174 iomux_v3_cfg_t const usdhc4_pads[] = { 175 MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CLK_CTRL), 176 MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), 177 MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 178 MX6_PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 179 MX6_PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 180 MX6_PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 181 /* eMMC RST */ 182 MX6_PAD_NANDF_ALE__GPIO6_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL), 183 }; 184 185 #ifdef CONFIG_FSL_ESDHC 186 struct fsl_esdhc_cfg usdhc_cfg[3] = { 187 {USDHC2_BASE_ADDR}, 188 {USDHC3_BASE_ADDR}, 189 {USDHC4_BASE_ADDR}, 190 }; 191 192 #define USDHC2_CD_GPIO IMX_GPIO_NR(1, 4) 193 #define USDHC3_CD_GPIO IMX_GPIO_NR(7, 0) 194 195 int board_mmc_getcd(struct mmc *mmc) 196 { 197 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; 198 int ret = 0; 199 200 switch (cfg->esdhc_base) { 201 case USDHC2_BASE_ADDR: 202 ret = !gpio_get_value(USDHC2_CD_GPIO); 203 break; 204 case USDHC3_BASE_ADDR: 205 if (board_type == BOARD_IS_RIOTBOARD) 206 ret = !gpio_get_value(USDHC3_CD_GPIO); 207 else if (board_type == BOARD_IS_MARSBOARD) 208 ret = 1; /* eMMC/uSDHC3 is always present */ 209 break; 210 case USDHC4_BASE_ADDR: 211 ret = 1; /* eMMC/uSDHC4 is always present */ 212 break; 213 } 214 215 return ret; 216 } 217 218 int board_mmc_init(bd_t *bis) 219 { 220 int ret; 221 int i; 222 223 /* 224 * According to the board_mmc_init() the following map is done: 225 * (U-Boot device node) (Physical Port) 226 * ** RiOTboard : 227 * mmc0 SDCard slot (bottom) 228 * mmc1 uSDCard slot (top) 229 * mmc2 eMMC 230 * ** MarSBoard : 231 * mmc0 uSDCard slot (bottom) 232 * mmc1 eMMC 233 */ 234 for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { 235 switch (i) { 236 case 0: 237 imx_iomux_v3_setup_multiple_pads( 238 usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); 239 gpio_direction_input(USDHC2_CD_GPIO); 240 usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); 241 usdhc_cfg[0].max_bus_width = 4; 242 break; 243 case 1: 244 imx_iomux_v3_setup_multiple_pads( 245 usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); 246 if (board_type == BOARD_IS_RIOTBOARD) { 247 imx_iomux_v3_setup_multiple_pads( 248 riotboard_usdhc3_pads, 249 ARRAY_SIZE(riotboard_usdhc3_pads)); 250 gpio_direction_input(USDHC3_CD_GPIO); 251 } else { 252 gpio_direction_output(IMX_GPIO_NR(7, 8) , 0); 253 udelay(250); 254 gpio_set_value(IMX_GPIO_NR(7, 8), 1); 255 } 256 usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); 257 usdhc_cfg[1].max_bus_width = 4; 258 break; 259 case 2: 260 imx_iomux_v3_setup_multiple_pads( 261 usdhc4_pads, ARRAY_SIZE(usdhc4_pads)); 262 usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); 263 usdhc_cfg[2].max_bus_width = 4; 264 gpio_direction_output(IMX_GPIO_NR(6, 8) , 0); 265 udelay(250); 266 gpio_set_value(IMX_GPIO_NR(6, 8), 1); 267 break; 268 default: 269 printf("Warning: you configured more USDHC controllers" 270 "(%d) then supported by the board (%d)\n", 271 i + 1, CONFIG_SYS_FSL_USDHC_NUM); 272 return -EINVAL; 273 } 274 275 ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); 276 if (ret) 277 return ret; 278 } 279 280 return 0; 281 } 282 #endif 283 284 #ifdef CONFIG_MXC_SPI 285 iomux_v3_cfg_t const ecspi1_pads[] = { 286 MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL), 287 MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL), 288 MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL), 289 MX6_PAD_EIM_EB2__GPIO2_IO30 | MUX_PAD_CTRL(NO_PAD_CTRL), 290 }; 291 292 int board_spi_cs_gpio(unsigned bus, unsigned cs) 293 { 294 return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(2, 30)) : -1; 295 } 296 297 static void setup_spi(void) 298 { 299 imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads)); 300 } 301 #endif 302 303 struct i2c_pads_info i2c_pad_info1 = { 304 .scl = { 305 .i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL 306 | MUX_PAD_CTRL(I2C_PAD_CTRL), 307 .gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27 308 | MUX_PAD_CTRL(I2C_PAD_CTRL), 309 .gp = IMX_GPIO_NR(5, 27) 310 }, 311 .sda = { 312 .i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA 313 | MUX_PAD_CTRL(I2C_PAD_CTRL), 314 .gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26 315 | MUX_PAD_CTRL(I2C_PAD_CTRL), 316 .gp = IMX_GPIO_NR(5, 26) 317 } 318 }; 319 320 struct i2c_pads_info i2c_pad_info2 = { 321 .scl = { 322 .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL 323 | MUX_PAD_CTRL(I2C_PAD_CTRL), 324 .gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 325 | MUX_PAD_CTRL(I2C_PAD_CTRL), 326 .gp = IMX_GPIO_NR(4, 12) 327 }, 328 .sda = { 329 .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA 330 | MUX_PAD_CTRL(I2C_PAD_CTRL), 331 .gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13 332 | MUX_PAD_CTRL(I2C_PAD_CTRL), 333 .gp = IMX_GPIO_NR(4, 13) 334 } 335 }; 336 337 struct i2c_pads_info i2c_pad_info3 = { 338 .scl = { 339 .i2c_mode = MX6_PAD_GPIO_5__I2C3_SCL 340 | MUX_PAD_CTRL(I2C_PAD_CTRL), 341 .gpio_mode = MX6_PAD_GPIO_5__GPIO1_IO05 342 | MUX_PAD_CTRL(I2C_PAD_CTRL), 343 .gp = IMX_GPIO_NR(1, 5) 344 }, 345 .sda = { 346 .i2c_mode = MX6_PAD_GPIO_6__I2C3_SDA 347 | MUX_PAD_CTRL(I2C_PAD_CTRL), 348 .gpio_mode = MX6_PAD_GPIO_6__GPIO1_IO06 349 | MUX_PAD_CTRL(I2C_PAD_CTRL), 350 .gp = IMX_GPIO_NR(1, 6) 351 } 352 }; 353 354 iomux_v3_cfg_t const tft_pads_riot[] = { 355 /* LCD_PWR_EN */ 356 MX6_PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL), 357 /* TOUCH_INT */ 358 MX6_PAD_NANDF_CS1__GPIO6_IO14 | MUX_PAD_CTRL(NO_PAD_CTRL), 359 /* LED_PWR_EN */ 360 MX6_PAD_NANDF_CS2__GPIO6_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL), 361 /* BL LEVEL */ 362 MX6_PAD_SD1_CMD__GPIO1_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL), 363 }; 364 365 iomux_v3_cfg_t const tft_pads_mars[] = { 366 /* LCD_PWR_EN */ 367 MX6_PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL), 368 /* TOUCH_INT */ 369 MX6_PAD_NANDF_CS1__GPIO6_IO14 | MUX_PAD_CTRL(NO_PAD_CTRL), 370 /* LED_PWR_EN */ 371 MX6_PAD_NANDF_CS2__GPIO6_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL), 372 /* BL LEVEL (PWM4) */ 373 MX6_PAD_SD4_DAT2__GPIO2_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL), 374 }; 375 376 #if defined(CONFIG_VIDEO_IPUV3) 377 378 static void enable_lvds(struct display_info_t const *dev) 379 { 380 struct iomuxc *iomux = (struct iomuxc *) 381 IOMUXC_BASE_ADDR; 382 setbits_le32(&iomux->gpr[2], 383 IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT); 384 /* set backlight level to ON */ 385 if (board_type == BOARD_IS_RIOTBOARD) 386 gpio_direction_output(IMX_GPIO_NR(1, 18) , 1); 387 else if (board_type == BOARD_IS_MARSBOARD) 388 gpio_direction_output(IMX_GPIO_NR(2, 10) , 1); 389 } 390 391 static void disable_lvds(struct display_info_t const *dev) 392 { 393 struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; 394 395 /* set backlight level to OFF */ 396 if (board_type == BOARD_IS_RIOTBOARD) 397 gpio_direction_output(IMX_GPIO_NR(1, 18) , 0); 398 else if (board_type == BOARD_IS_MARSBOARD) 399 gpio_direction_output(IMX_GPIO_NR(2, 10) , 0); 400 401 clrbits_le32(&iomux->gpr[2], 402 IOMUXC_GPR2_LVDS_CH0_MODE_MASK); 403 } 404 405 static void do_enable_hdmi(struct display_info_t const *dev) 406 { 407 disable_lvds(dev); 408 imx_enable_hdmi_phy(); 409 } 410 411 static int detect_i2c(struct display_info_t const *dev) 412 { 413 return (0 == i2c_set_bus_num(dev->bus)) && 414 (0 == i2c_probe(dev->addr)); 415 } 416 417 struct display_info_t const displays[] = {{ 418 .bus = -1, 419 .addr = 0, 420 .pixfmt = IPU_PIX_FMT_RGB24, 421 .detect = detect_hdmi, 422 .enable = do_enable_hdmi, 423 .mode = { 424 .name = "HDMI", 425 .refresh = 60, 426 .xres = 1024, 427 .yres = 768, 428 .pixclock = 15385, 429 .left_margin = 220, 430 .right_margin = 40, 431 .upper_margin = 21, 432 .lower_margin = 7, 433 .hsync_len = 60, 434 .vsync_len = 10, 435 .sync = FB_SYNC_EXT, 436 .vmode = FB_VMODE_NONINTERLACED 437 } }, { 438 .bus = 2, 439 .addr = 0x1, 440 .pixfmt = IPU_PIX_FMT_LVDS666, 441 .detect = detect_i2c, 442 .enable = enable_lvds, 443 .mode = { 444 .name = "LCD8000-97C", 445 .refresh = 60, 446 .xres = 1024, 447 .yres = 768, 448 .pixclock = 15385, 449 .left_margin = 100, 450 .right_margin = 200, 451 .upper_margin = 10, 452 .lower_margin = 20, 453 .hsync_len = 20, 454 .vsync_len = 8, 455 .sync = FB_SYNC_EXT, 456 .vmode = FB_VMODE_NONINTERLACED 457 } } }; 458 size_t display_count = ARRAY_SIZE(displays); 459 460 static void setup_display(void) 461 { 462 struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; 463 struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; 464 int reg; 465 466 enable_ipu_clock(); 467 imx_setup_hdmi(); 468 469 /* Turn on LDB0, IPU,IPU DI0 clocks */ 470 setbits_le32(&mxc_ccm->CCGR3, 471 MXC_CCM_CCGR3_LDB_DI0_MASK); 472 473 /* set LDB0 clk select to 011/011 */ 474 clrsetbits_le32(&mxc_ccm->cs2cdr, 475 MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK, 476 (3 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)); 477 478 setbits_le32(&mxc_ccm->cscmr2, 479 MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV); 480 481 setbits_le32(&mxc_ccm->chsccdr, 482 (CHSCCDR_CLK_SEL_LDB_DI0 483 << MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET)); 484 485 reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES 486 | IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW 487 | IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG 488 | IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT 489 | IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG 490 | IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT 491 | IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED 492 | IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0; 493 writel(reg, &iomux->gpr[2]); 494 495 clrsetbits_le32(&iomux->gpr[3], 496 IOMUXC_GPR3_LVDS0_MUX_CTL_MASK | 497 IOMUXC_GPR3_HDMI_MUX_CTL_MASK, 498 IOMUXC_GPR3_MUX_SRC_IPU1_DI0 499 << IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET); 500 } 501 #endif /* CONFIG_VIDEO_IPUV3 */ 502 503 /* 504 * Do not overwrite the console 505 * Use always serial for U-Boot console 506 */ 507 int overwrite_console(void) 508 { 509 return 1; 510 } 511 512 int board_eth_init(bd_t *bis) 513 { 514 setup_iomux_enet(); 515 516 return cpu_eth_init(bis); 517 } 518 519 int board_early_init_f(void) 520 { 521 u32 cputype = cpu_type(get_cpu_rev()); 522 523 switch (cputype) { 524 case MXC_CPU_MX6SOLO: 525 board_type = BOARD_IS_RIOTBOARD; 526 break; 527 case MXC_CPU_MX6D: 528 board_type = BOARD_IS_MARSBOARD; 529 break; 530 } 531 532 setup_iomux_uart(); 533 534 if (board_type == BOARD_IS_RIOTBOARD) 535 imx_iomux_v3_setup_multiple_pads( 536 tft_pads_riot, ARRAY_SIZE(tft_pads_riot)); 537 else if (board_type == BOARD_IS_MARSBOARD) 538 imx_iomux_v3_setup_multiple_pads( 539 tft_pads_mars, ARRAY_SIZE(tft_pads_mars)); 540 #if defined(CONFIG_VIDEO_IPUV3) 541 /* power ON LCD */ 542 gpio_direction_output(IMX_GPIO_NR(1, 29) , 1); 543 /* touch interrupt is an input */ 544 gpio_direction_input(IMX_GPIO_NR(6, 14)); 545 /* power ON backlight */ 546 gpio_direction_output(IMX_GPIO_NR(6, 15) , 1); 547 /* set backlight level to off */ 548 if (board_type == BOARD_IS_RIOTBOARD) 549 gpio_direction_output(IMX_GPIO_NR(1, 18) , 0); 550 else if (board_type == BOARD_IS_MARSBOARD) 551 gpio_direction_output(IMX_GPIO_NR(2, 10) , 0); 552 setup_display(); 553 #endif 554 555 return 0; 556 } 557 558 int board_init(void) 559 { 560 /* address of boot parameters */ 561 gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; 562 /* i2c1 : PMIC, Audio codec on RiOT, Expansion connector on MarS */ 563 setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); 564 /* i2c2 : HDMI EDID */ 565 setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); 566 /* i2c3 : LVDS, Expansion connector */ 567 setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3); 568 #ifdef CONFIG_MXC_SPI 569 setup_spi(); 570 #endif 571 return 0; 572 } 573 574 #ifdef CONFIG_CMD_BMODE 575 static const struct boot_mode riotboard_boot_modes[] = { 576 {"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)}, 577 {"sd3", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)}, 578 {"emmc", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)}, 579 {NULL, 0}, 580 }; 581 static const struct boot_mode marsboard_boot_modes[] = { 582 {"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)}, 583 {"emmc", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)}, 584 {NULL, 0}, 585 }; 586 #endif 587 588 int board_late_init(void) 589 { 590 #ifdef CONFIG_CMD_BMODE 591 if (board_type == BOARD_IS_RIOTBOARD) 592 add_board_boot_modes(riotboard_boot_modes); 593 else if (board_type == BOARD_IS_RIOTBOARD) 594 add_board_boot_modes(marsboard_boot_modes); 595 #endif 596 597 return 0; 598 } 599 600 int checkboard(void) 601 { 602 puts("Board: "); 603 if (board_type == BOARD_IS_MARSBOARD) 604 puts("MarSBoard\n"); 605 else if (board_type == BOARD_IS_RIOTBOARD) 606 puts("RIoTboard\n"); 607 else 608 printf("unknown - cputype : %02x\n", cpu_type(get_cpu_rev())); 609 610 return 0; 611 } 612