1 /* 2 * DHCOM DH-iMX6 PDK SPL support 3 * 4 * Copyright (C) 2017 Marek Vasut <marex@denx.de> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #include <common.h> 10 #include <asm/arch/clock.h> 11 #include <asm/arch/crm_regs.h> 12 #include <asm/arch/imx-regs.h> 13 #include <asm/arch/iomux.h> 14 #include <asm/arch/mx6-ddr.h> 15 #include <asm/arch/mx6-pins.h> 16 #include <asm/arch/sys_proto.h> 17 #include <asm/gpio.h> 18 #include <asm/mach-imx/boot_mode.h> 19 #include <asm/mach-imx/iomux-v3.h> 20 #include <asm/mach-imx/mxc_i2c.h> 21 #include <asm/io.h> 22 #include <errno.h> 23 #include <fuse.h> 24 #include <fsl_esdhc.h> 25 #include <i2c.h> 26 #include <mmc.h> 27 #include <spl.h> 28 29 #define ENET_PAD_CTRL \ 30 (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ 31 PAD_CTL_HYS) 32 33 #define GPIO_PAD_CTRL \ 34 (PAD_CTL_HYS | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm) 35 36 #define SPI_PAD_CTRL \ 37 (PAD_CTL_HYS | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ 38 PAD_CTL_SRE_FAST) 39 40 #define UART_PAD_CTRL \ 41 (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ 42 PAD_CTL_SRE_FAST | PAD_CTL_HYS) 43 44 #define USDHC_PAD_CTRL \ 45 (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \ 46 PAD_CTL_SRE_FAST | PAD_CTL_HYS) 47 48 DECLARE_GLOBAL_DATA_PTR; 49 50 static const struct mx6dq_iomux_ddr_regs dhcom6dq_ddr_ioregs = { 51 .dram_sdclk_0 = 0x00020030, 52 .dram_sdclk_1 = 0x00020030, 53 .dram_cas = 0x00020030, 54 .dram_ras = 0x00020030, 55 .dram_reset = 0x00020030, 56 .dram_sdcke0 = 0x00003000, 57 .dram_sdcke1 = 0x00003000, 58 .dram_sdba2 = 0x00000000, 59 .dram_sdodt0 = 0x00003030, 60 .dram_sdodt1 = 0x00003030, 61 .dram_sdqs0 = 0x00000030, 62 .dram_sdqs1 = 0x00000030, 63 .dram_sdqs2 = 0x00000030, 64 .dram_sdqs3 = 0x00000030, 65 .dram_sdqs4 = 0x00000030, 66 .dram_sdqs5 = 0x00000030, 67 .dram_sdqs6 = 0x00000030, 68 .dram_sdqs7 = 0x00000030, 69 .dram_dqm0 = 0x00020030, 70 .dram_dqm1 = 0x00020030, 71 .dram_dqm2 = 0x00020030, 72 .dram_dqm3 = 0x00020030, 73 .dram_dqm4 = 0x00020030, 74 .dram_dqm5 = 0x00020030, 75 .dram_dqm6 = 0x00020030, 76 .dram_dqm7 = 0x00020030, 77 }; 78 79 static const struct mx6dq_iomux_grp_regs dhcom6dq_grp_ioregs = { 80 .grp_ddr_type = 0x000C0000, 81 .grp_ddrmode_ctl = 0x00020000, 82 .grp_ddrpke = 0x00000000, 83 .grp_addds = 0x00000030, 84 .grp_ctlds = 0x00000030, 85 .grp_ddrmode = 0x00020000, 86 .grp_b0ds = 0x00000030, 87 .grp_b1ds = 0x00000030, 88 .grp_b2ds = 0x00000030, 89 .grp_b3ds = 0x00000030, 90 .grp_b4ds = 0x00000030, 91 .grp_b5ds = 0x00000030, 92 .grp_b6ds = 0x00000030, 93 .grp_b7ds = 0x00000030, 94 }; 95 96 static const struct mx6sdl_iomux_ddr_regs dhcom6sdl_ddr_ioregs = { 97 .dram_sdclk_0 = 0x00020030, 98 .dram_sdclk_1 = 0x00020030, 99 .dram_cas = 0x00020030, 100 .dram_ras = 0x00020030, 101 .dram_reset = 0x00020030, 102 .dram_sdcke0 = 0x00003000, 103 .dram_sdcke1 = 0x00003000, 104 .dram_sdba2 = 0x00000000, 105 .dram_sdodt0 = 0x00003030, 106 .dram_sdodt1 = 0x00003030, 107 .dram_sdqs0 = 0x00000030, 108 .dram_sdqs1 = 0x00000030, 109 .dram_sdqs2 = 0x00000030, 110 .dram_sdqs3 = 0x00000030, 111 .dram_sdqs4 = 0x00000030, 112 .dram_sdqs5 = 0x00000030, 113 .dram_sdqs6 = 0x00000030, 114 .dram_sdqs7 = 0x00000030, 115 .dram_dqm0 = 0x00020030, 116 .dram_dqm1 = 0x00020030, 117 .dram_dqm2 = 0x00020030, 118 .dram_dqm3 = 0x00020030, 119 .dram_dqm4 = 0x00020030, 120 .dram_dqm5 = 0x00020030, 121 .dram_dqm6 = 0x00020030, 122 .dram_dqm7 = 0x00020030, 123 }; 124 125 static const struct mx6sdl_iomux_grp_regs dhcom6sdl_grp_ioregs = { 126 .grp_ddr_type = 0x000C0000, 127 .grp_ddrmode_ctl = 0x00020000, 128 .grp_ddrpke = 0x00000000, 129 .grp_addds = 0x00000030, 130 .grp_ctlds = 0x00000030, 131 .grp_ddrmode = 0x00020000, 132 .grp_b0ds = 0x00000030, 133 .grp_b1ds = 0x00000030, 134 .grp_b2ds = 0x00000030, 135 .grp_b3ds = 0x00000030, 136 .grp_b4ds = 0x00000030, 137 .grp_b5ds = 0x00000030, 138 .grp_b6ds = 0x00000030, 139 .grp_b7ds = 0x00000030, 140 }; 141 142 static const struct mx6_mmdc_calibration dhcom_mmdc_calib = { 143 .p0_mpwldectrl0 = 0x0011000E, 144 .p0_mpwldectrl1 = 0x000E001B, 145 .p1_mpwldectrl0 = 0x00190015, 146 .p1_mpwldectrl1 = 0x00070018, 147 .p0_mpdgctrl0 = 0x42720306, 148 .p0_mpdgctrl1 = 0x026F0266, 149 .p1_mpdgctrl0 = 0x4273030A, 150 .p1_mpdgctrl1 = 0x02740240, 151 .p0_mprddlctl = 0x45393B3E, 152 .p1_mprddlctl = 0x403A3747, 153 .p0_mpwrdlctl = 0x40434541, 154 .p1_mpwrdlctl = 0x473E4A3B, 155 }; 156 157 static const struct mx6_ddr3_cfg dhcom_mem_ddr = { 158 .mem_speed = 1600, 159 .density = 2, 160 .width = 64, 161 .banks = 8, 162 .rowaddr = 14, 163 .coladdr = 10, 164 .pagesz = 2, 165 .trcd = 1312, 166 .trcmin = 5863, 167 .trasmin = 3750, 168 }; 169 170 static const struct mx6_ddr_sysinfo dhcom_ddr_info = { 171 /* width of data bus:0=16,1=32,2=64 */ 172 .dsize = 2, 173 .cs_density = 16, 174 .ncs = 1, /* single chip select */ 175 .cs1_mirror = 1, 176 .rtt_wr = 1, /* DDR3_RTT_60_OHM, RTT_Wr = RZQ/4 */ 177 .rtt_nom = 1, /* DDR3_RTT_60_OHM, RTT_Nom = RZQ/4 */ 178 .walat = 1, /* Write additional latency */ 179 .ralat = 5, /* Read additional latency */ 180 .mif3_mode = 3, /* Command prediction working mode */ 181 .bi_on = 1, /* Bank interleaving enabled */ 182 .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */ 183 .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */ 184 .refsel = 1, /* Refresh cycles at 32KHz */ 185 .refr = 3, /* 4 refresh commands per refresh cycle */ 186 }; 187 188 static void ccgr_init(void) 189 { 190 struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; 191 192 writel(0x00C03F3F, &ccm->CCGR0); 193 writel(0x0030FC03, &ccm->CCGR1); 194 writel(0x0FFFC000, &ccm->CCGR2); 195 writel(0x3FF00000, &ccm->CCGR3); 196 writel(0x00FFF300, &ccm->CCGR4); 197 writel(0x0F0000C3, &ccm->CCGR5); 198 writel(0x000003FF, &ccm->CCGR6); 199 } 200 201 /* Board ID */ 202 static iomux_v3_cfg_t const hwcode_pads[] = { 203 IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), 204 IOMUX_PADS(PAD_EIM_A23__GPIO6_IO06 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), 205 IOMUX_PADS(PAD_EIM_A22__GPIO2_IO16 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), 206 }; 207 208 static void setup_iomux_boardid(void) 209 { 210 /* HW code pins: Setup alternate function and configure pads */ 211 SETUP_IOMUX_PADS(hwcode_pads); 212 } 213 214 /* GPIO */ 215 static iomux_v3_cfg_t const gpio_pads[] = { 216 IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), 217 IOMUX_PADS(PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), 218 IOMUX_PADS(PAD_GPIO_5__GPIO1_IO05 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), 219 IOMUX_PADS(PAD_CSI0_DAT17__GPIO6_IO03 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), 220 IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), 221 IOMUX_PADS(PAD_DI0_PIN4__GPIO4_IO20 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), 222 IOMUX_PADS(PAD_EIM_D27__GPIO3_IO27 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), 223 IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), 224 IOMUX_PADS(PAD_KEY_COL1__GPIO4_IO08 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), 225 IOMUX_PADS(PAD_NANDF_CS1__GPIO6_IO14 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), 226 IOMUX_PADS(PAD_NANDF_CS2__GPIO6_IO15 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), 227 IOMUX_PADS(PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), 228 IOMUX_PADS(PAD_SD3_DAT5__GPIO7_IO00 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), 229 IOMUX_PADS(PAD_SD3_DAT4__GPIO7_IO01 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), 230 IOMUX_PADS(PAD_CSI0_VSYNC__GPIO5_IO21 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), 231 IOMUX_PADS(PAD_GPIO_18__GPIO7_IO13 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), 232 IOMUX_PADS(PAD_SD1_CMD__GPIO1_IO18 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), 233 IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), 234 IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), 235 IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), 236 IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), 237 IOMUX_PADS(PAD_CSI0_PIXCLK__GPIO5_IO18 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), 238 IOMUX_PADS(PAD_CSI0_MCLK__GPIO5_IO19 | MUX_PAD_CTRL(GPIO_PAD_CTRL)), 239 }; 240 241 static void setup_iomux_gpio(void) 242 { 243 SETUP_IOMUX_PADS(gpio_pads); 244 } 245 246 /* Ethernet */ 247 static iomux_v3_cfg_t const enet_pads[] = { 248 IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL)), 249 IOMUX_PADS(PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL)), 250 IOMUX_PADS(PAD_ENET_TX_EN__ENET_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL)), 251 IOMUX_PADS(PAD_ENET_TXD0__ENET_TX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL)), 252 IOMUX_PADS(PAD_ENET_TXD1__ENET_TX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL)), 253 IOMUX_PADS(PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL)), 254 IOMUX_PADS(PAD_ENET_RX_ER__ENET_RX_ER | MUX_PAD_CTRL(ENET_PAD_CTRL)), 255 IOMUX_PADS(PAD_ENET_RXD0__ENET_RX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL)), 256 IOMUX_PADS(PAD_ENET_RXD1__ENET_RX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL)), 257 IOMUX_PADS(PAD_ENET_CRS_DV__ENET_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL)), 258 /* SMSC PHY Reset */ 259 IOMUX_PADS(PAD_EIM_WAIT__GPIO5_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL)), 260 /* ENET_VIO_GPIO */ 261 IOMUX_PADS(PAD_GPIO_7__GPIO1_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL)), 262 /* ENET_Interrupt - (not used) */ 263 IOMUX_PADS(PAD_RGMII_RD0__GPIO6_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL)), 264 }; 265 266 static void setup_iomux_enet(void) 267 { 268 SETUP_IOMUX_PADS(enet_pads); 269 } 270 271 /* SD interface */ 272 static iomux_v3_cfg_t const usdhc2_pads[] = { 273 IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 274 IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 275 IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 276 IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 277 IOMUX_PADS(PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 278 IOMUX_PADS(PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 279 IOMUX_PADS(PAD_NANDF_CS3__GPIO6_IO16 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* CD */ 280 }; 281 282 /* onboard microSD */ 283 static iomux_v3_cfg_t const usdhc3_pads[] = { 284 IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 285 IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 286 IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 287 IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 288 IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 289 IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 290 IOMUX_PADS(PAD_SD3_RST__GPIO7_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* CD */ 291 }; 292 293 /* eMMC */ 294 static iomux_v3_cfg_t const usdhc4_pads[] = { 295 IOMUX_PADS(PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 296 IOMUX_PADS(PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 297 IOMUX_PADS(PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 298 IOMUX_PADS(PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 299 IOMUX_PADS(PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 300 IOMUX_PADS(PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 301 IOMUX_PADS(PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 302 IOMUX_PADS(PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 303 IOMUX_PADS(PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 304 IOMUX_PADS(PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 305 }; 306 307 /* SD */ 308 static void setup_iomux_sd(void) 309 { 310 SETUP_IOMUX_PADS(usdhc2_pads); 311 SETUP_IOMUX_PADS(usdhc3_pads); 312 SETUP_IOMUX_PADS(usdhc4_pads); 313 } 314 315 /* SPI */ 316 static iomux_v3_cfg_t const ecspi1_pads[] = { 317 /* SS0 */ 318 IOMUX_PADS(PAD_EIM_EB2__GPIO2_IO30 | MUX_PAD_CTRL(SPI_PAD_CTRL)), 319 IOMUX_PADS(PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL)), 320 IOMUX_PADS(PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL)), 321 IOMUX_PADS(PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL)), 322 }; 323 324 static void setup_iomux_spi(void) 325 { 326 SETUP_IOMUX_PADS(ecspi1_pads); 327 } 328 329 int board_spi_cs_gpio(unsigned bus, unsigned cs) 330 { 331 if (bus == 0 && cs == 0) 332 return IMX_GPIO_NR(2, 30); 333 else 334 return -1; 335 } 336 337 /* UART */ 338 static iomux_v3_cfg_t const uart1_pads[] = { 339 IOMUX_PADS(PAD_SD3_DAT7__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), 340 IOMUX_PADS(PAD_SD3_DAT6__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), 341 }; 342 343 static void setup_iomux_uart(void) 344 { 345 SETUP_IOMUX_PADS(uart1_pads); 346 } 347 348 /* USB */ 349 static iomux_v3_cfg_t const usb_pads[] = { 350 IOMUX_PADS(PAD_GPIO_1__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL)), 351 IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL)), 352 }; 353 354 static void setup_iomux_usb(void) 355 { 356 SETUP_IOMUX_PADS(usb_pads); 357 } 358 359 void board_init_f(ulong dummy) 360 { 361 /* setup AIPS and disable watchdog */ 362 arch_cpu_init(); 363 364 ccgr_init(); 365 gpr_init(); 366 367 /* setup GP timer */ 368 timer_init(); 369 370 setup_iomux_boardid(); 371 setup_iomux_gpio(); 372 setup_iomux_enet(); 373 setup_iomux_sd(); 374 setup_iomux_spi(); 375 setup_iomux_uart(); 376 setup_iomux_usb(); 377 378 /* UART clocks enabled and gd valid - init serial console */ 379 preloader_console_init(); 380 381 /* Start the DDR DRAM */ 382 if (is_mx6dq()) 383 mx6dq_dram_iocfg(dhcom_mem_ddr.width, &dhcom6dq_ddr_ioregs, 384 &dhcom6dq_grp_ioregs); 385 else 386 mx6sdl_dram_iocfg(dhcom_mem_ddr.width, &dhcom6sdl_ddr_ioregs, 387 &dhcom6sdl_grp_ioregs); 388 mx6_dram_cfg(&dhcom_ddr_info, &dhcom_mmdc_calib, &dhcom_mem_ddr); 389 390 /* Perform DDR DRAM calibration */ 391 udelay(100); 392 mmdc_do_dqs_calibration(&dhcom_ddr_info); 393 394 /* Clear the BSS. */ 395 memset(__bss_start, 0, __bss_end - __bss_start); 396 397 /* load/boot image from boot device */ 398 board_init_r(NULL, 0); 399 } 400