1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * DHCOM DH-iMX6 PDK SPL support
4  *
5  * Copyright (C) 2017 Marek Vasut <marex@denx.de>
6  */
7 
8 #include <common.h>
9 #include <asm/arch/clock.h>
10 #include <asm/arch/crm_regs.h>
11 #include <asm/arch/imx-regs.h>
12 #include <asm/arch/iomux.h>
13 #include <asm/arch/mx6-ddr.h>
14 #include <asm/arch/mx6-pins.h>
15 #include <asm/arch/sys_proto.h>
16 #include <asm/gpio.h>
17 #include <asm/mach-imx/boot_mode.h>
18 #include <asm/mach-imx/iomux-v3.h>
19 #include <asm/mach-imx/mxc_i2c.h>
20 #include <asm/io.h>
21 #include <errno.h>
22 #include <fuse.h>
23 #include <fsl_esdhc.h>
24 #include <i2c.h>
25 #include <mmc.h>
26 #include <spl.h>
27 
28 #define ENET_PAD_CTRL							\
29 	(PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm |	\
30 	 PAD_CTL_HYS)
31 
32 #define GPIO_PAD_CTRL							\
33 	(PAD_CTL_HYS | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm)
34 
35 #define SPI_PAD_CTRL							\
36 	(PAD_CTL_HYS | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm |		\
37 	PAD_CTL_SRE_FAST)
38 
39 #define UART_PAD_CTRL							\
40 	(PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm |	\
41 	 PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
42 
43 #define USDHC_PAD_CTRL							\
44 	(PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm |	\
45 	 PAD_CTL_SRE_FAST | PAD_CTL_HYS)
46 
47 static const struct mx6dq_iomux_ddr_regs dhcom6dq_ddr_ioregs = {
48 	.dram_sdclk_0	= 0x00020030,
49 	.dram_sdclk_1	= 0x00020030,
50 	.dram_cas	= 0x00020030,
51 	.dram_ras	= 0x00020030,
52 	.dram_reset	= 0x00020030,
53 	.dram_sdcke0	= 0x00003000,
54 	.dram_sdcke1	= 0x00003000,
55 	.dram_sdba2	= 0x00000000,
56 	.dram_sdodt0	= 0x00003030,
57 	.dram_sdodt1	= 0x00003030,
58 	.dram_sdqs0	= 0x00000030,
59 	.dram_sdqs1	= 0x00000030,
60 	.dram_sdqs2	= 0x00000030,
61 	.dram_sdqs3	= 0x00000030,
62 	.dram_sdqs4	= 0x00000030,
63 	.dram_sdqs5	= 0x00000030,
64 	.dram_sdqs6	= 0x00000030,
65 	.dram_sdqs7	= 0x00000030,
66 	.dram_dqm0	= 0x00020030,
67 	.dram_dqm1	= 0x00020030,
68 	.dram_dqm2	= 0x00020030,
69 	.dram_dqm3	= 0x00020030,
70 	.dram_dqm4	= 0x00020030,
71 	.dram_dqm5	= 0x00020030,
72 	.dram_dqm6	= 0x00020030,
73 	.dram_dqm7	= 0x00020030,
74 };
75 
76 static const struct mx6dq_iomux_grp_regs dhcom6dq_grp_ioregs = {
77 	.grp_ddr_type	= 0x000C0000,
78 	.grp_ddrmode_ctl = 0x00020000,
79 	.grp_ddrpke	= 0x00000000,
80 	.grp_addds	= 0x00000030,
81 	.grp_ctlds	= 0x00000030,
82 	.grp_ddrmode	= 0x00020000,
83 	.grp_b0ds	= 0x00000030,
84 	.grp_b1ds	= 0x00000030,
85 	.grp_b2ds	= 0x00000030,
86 	.grp_b3ds	= 0x00000030,
87 	.grp_b4ds	= 0x00000030,
88 	.grp_b5ds	= 0x00000030,
89 	.grp_b6ds	= 0x00000030,
90 	.grp_b7ds	= 0x00000030,
91 };
92 
93 static const struct mx6sdl_iomux_ddr_regs dhcom6sdl_ddr_ioregs = {
94 	.dram_sdclk_0	= 0x00020030,
95 	.dram_sdclk_1	= 0x00020030,
96 	.dram_cas	= 0x00020030,
97 	.dram_ras	= 0x00020030,
98 	.dram_reset	= 0x00020030,
99 	.dram_sdcke0	= 0x00003000,
100 	.dram_sdcke1	= 0x00003000,
101 	.dram_sdba2	= 0x00000000,
102 	.dram_sdodt0	= 0x00003030,
103 	.dram_sdodt1	= 0x00003030,
104 	.dram_sdqs0	= 0x00000030,
105 	.dram_sdqs1	= 0x00000030,
106 	.dram_sdqs2	= 0x00000030,
107 	.dram_sdqs3	= 0x00000030,
108 	.dram_sdqs4	= 0x00000030,
109 	.dram_sdqs5	= 0x00000030,
110 	.dram_sdqs6	= 0x00000030,
111 	.dram_sdqs7	= 0x00000030,
112 	.dram_dqm0	= 0x00020030,
113 	.dram_dqm1	= 0x00020030,
114 	.dram_dqm2	= 0x00020030,
115 	.dram_dqm3	= 0x00020030,
116 	.dram_dqm4	= 0x00020030,
117 	.dram_dqm5	= 0x00020030,
118 	.dram_dqm6	= 0x00020030,
119 	.dram_dqm7	= 0x00020030,
120 };
121 
122 static const struct mx6sdl_iomux_grp_regs dhcom6sdl_grp_ioregs = {
123 	.grp_ddr_type	= 0x000C0000,
124 	.grp_ddrmode_ctl = 0x00020000,
125 	.grp_ddrpke	= 0x00000000,
126 	.grp_addds	= 0x00000030,
127 	.grp_ctlds	= 0x00000030,
128 	.grp_ddrmode	= 0x00020000,
129 	.grp_b0ds	= 0x00000030,
130 	.grp_b1ds	= 0x00000030,
131 	.grp_b2ds	= 0x00000030,
132 	.grp_b3ds	= 0x00000030,
133 	.grp_b4ds	= 0x00000030,
134 	.grp_b5ds	= 0x00000030,
135 	.grp_b6ds	= 0x00000030,
136 	.grp_b7ds	= 0x00000030,
137 };
138 
139 static const struct mx6_mmdc_calibration dhcom_mmdc_calib_4x4g_1066 = {
140 	.p0_mpwldectrl0	= 0x00150019,
141 	.p0_mpwldectrl1	= 0x001C000B,
142 	.p1_mpwldectrl0	= 0x00020018,
143 	.p1_mpwldectrl1	= 0x0002000C,
144 	.p0_mpdgctrl0	= 0x43140320,
145 	.p0_mpdgctrl1	= 0x03080304,
146 	.p1_mpdgctrl0	= 0x43180320,
147 	.p1_mpdgctrl1	= 0x03100254,
148 	.p0_mprddlctl	= 0x4830383C,
149 	.p1_mprddlctl	= 0x3836323E,
150 	.p0_mpwrdlctl	= 0x3E444642,
151 	.p1_mpwrdlctl	= 0x42344442,
152 };
153 
154 static const struct mx6_mmdc_calibration dhcom_mmdc_calib_2x4g_800 = {
155 	.p0_mpwldectrl0	= 0x0040003C,
156 	.p0_mpwldectrl1	= 0x0032003E,
157 	.p0_mpdgctrl0	= 0x42350231,
158 	.p0_mpdgctrl1	= 0x021A0218,
159 	.p0_mprddlctl	= 0x4B4B4E49,
160 	.p0_mpwrdlctl	= 0x3F3F3035,
161 };
162 
163 static const struct mx6_mmdc_calibration dhcom_mmdc_calib_4x2g_1066 = {
164 	.p0_mpwldectrl0	= 0x0011000E,
165 	.p0_mpwldectrl1	= 0x000E001B,
166 	.p1_mpwldectrl0	= 0x00190015,
167 	.p1_mpwldectrl1	= 0x00070018,
168 	.p0_mpdgctrl0	= 0x42720306,
169 	.p0_mpdgctrl1	= 0x026F0266,
170 	.p1_mpdgctrl0	= 0x4273030A,
171 	.p1_mpdgctrl1	= 0x02740240,
172 	.p0_mprddlctl	= 0x45393B3E,
173 	.p1_mprddlctl	= 0x403A3747,
174 	.p0_mpwrdlctl	= 0x40434541,
175 	.p1_mpwrdlctl	= 0x473E4A3B,
176 };
177 
178 static const struct mx6_mmdc_calibration dhcom_mmdc_calib_4x2g_800 = {
179 	.p0_mpwldectrl0	= 0x003A003A,
180 	.p0_mpwldectrl1	= 0x0030002F,
181 	.p1_mpwldectrl0	= 0x002F0038,
182 	.p1_mpwldectrl1	= 0x00270039,
183 	.p0_mpdgctrl0	= 0x420F020F,
184 	.p0_mpdgctrl1	= 0x01760175,
185 	.p1_mpdgctrl0	= 0x41640171,
186 	.p1_mpdgctrl1	= 0x015E0160,
187 	.p0_mprddlctl	= 0x45464B4A,
188 	.p1_mprddlctl	= 0x49484A46,
189 	.p0_mpwrdlctl	= 0x40402E32,
190 	.p1_mpwrdlctl	= 0x3A3A3231,
191 };
192 
193 static const struct mx6_mmdc_calibration dhcom_mmdc_calib_2x2g_800 = {
194 	.p0_mpwldectrl0	= 0x0040003C,
195 	.p0_mpwldectrl1	= 0x0032003E,
196 	.p0_mpdgctrl0	= 0x42350231,
197 	.p0_mpdgctrl1	= 0x021A0218,
198 	.p0_mprddlctl	= 0x4B4B4E49,
199 	.p0_mpwrdlctl	= 0x3F3F3035,
200 };
201 
202 /*
203  * 2 Gbit DDR3 memory
204  *   - NANYA #NT5CC128M16IP-DII
205  *   - NANYA #NT5CB128M16FP-DII
206  */
207 static const struct mx6_ddr3_cfg dhcom_mem_ddr_2g = {
208 	.mem_speed	= 1600,
209 	.density	= 2,
210 	.width		= 16,
211 	.banks		= 8,
212 	.rowaddr	= 14,
213 	.coladdr	= 10,
214 	.pagesz		= 2,
215 	.trcd		= 1375,
216 	.trcmin		= 5863,
217 	.trasmin	= 3750,
218 };
219 
220 /*
221  * 4 Gbit DDR3 memory
222  *   - Intelligent Memory #IM4G16D3EABG-125I
223  */
224 static const struct mx6_ddr3_cfg dhcom_mem_ddr_4g = {
225 	.mem_speed	= 1600,
226 	.density	= 4,
227 	.width		= 16,
228 	.banks		= 8,
229 	.rowaddr	= 15,
230 	.coladdr	= 10,
231 	.pagesz		= 2,
232 	.trcd		= 1375,
233 	.trcmin		= 4875,
234 	.trasmin	= 3500,
235 };
236 
237 /* DDR3 64bit */
238 static const struct mx6_ddr_sysinfo dhcom_ddr_64bit = {
239 	/* width of data bus:0=16,1=32,2=64 */
240 	.dsize		= 2,
241 	.cs_density	= 32,
242 	.ncs		= 1,	/* single chip select */
243 	.cs1_mirror	= 1,
244 	.rtt_wr		= 1,	/* DDR3_RTT_60_OHM, RTT_Wr = RZQ/4 */
245 	.rtt_nom	= 1,	/* DDR3_RTT_60_OHM, RTT_Nom = RZQ/4 */
246 	.walat		= 1,	/* Write additional latency */
247 	.ralat		= 5,	/* Read additional latency */
248 	.mif3_mode	= 3,	/* Command prediction working mode */
249 	.bi_on		= 1,	/* Bank interleaving enabled */
250 	.sde_to_rst	= 0x10,	/* 14 cycles, 200us (JEDEC default) */
251 	.rst_to_cke	= 0x23,	/* 33 cycles, 500us (JEDEC default) */
252 	.refsel		= 1,	/* Refresh cycles at 32KHz */
253 	.refr		= 3,	/* 4 refresh commands per refresh cycle */
254 };
255 
256 /* DDR3 32bit */
257 static const struct mx6_ddr_sysinfo dhcom_ddr_32bit = {
258 	/* width of data bus:0=16,1=32,2=64 */
259 	.dsize		= 1,
260 	.cs_density	= 32,
261 	.ncs		= 1,	/* single chip select */
262 	.cs1_mirror	= 1,
263 	.rtt_wr		= 1,	/* DDR3_RTT_60_OHM, RTT_Wr = RZQ/4 */
264 	.rtt_nom	= 1,	/* DDR3_RTT_60_OHM, RTT_Nom = RZQ/4 */
265 	.walat		= 1,	/* Write additional latency */
266 	.ralat		= 5,	/* Read additional latency */
267 	.mif3_mode	= 3,	/* Command prediction working mode */
268 	.bi_on		= 1,	/* Bank interleaving enabled */
269 	.sde_to_rst	= 0x10,	/* 14 cycles, 200us (JEDEC default) */
270 	.rst_to_cke	= 0x23,	/* 33 cycles, 500us (JEDEC default) */
271 	.refsel		= 1,	/* Refresh cycles at 32KHz */
272 	.refr		= 3,	/* 4 refresh commands per refresh cycle */
273 };
274 
275 static void ccgr_init(void)
276 {
277 	struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
278 
279 	writel(0x00C03F3F, &ccm->CCGR0);
280 	writel(0x0030FC03, &ccm->CCGR1);
281 	writel(0x0FFFC000, &ccm->CCGR2);
282 	writel(0x3FF00000, &ccm->CCGR3);
283 	writel(0x00FFF300, &ccm->CCGR4);
284 	writel(0x0F0000C3, &ccm->CCGR5);
285 	writel(0x000003FF, &ccm->CCGR6);
286 }
287 
288 /* Board ID */
289 static iomux_v3_cfg_t const hwcode_pads[] = {
290 	IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
291 	IOMUX_PADS(PAD_EIM_A23__GPIO6_IO06	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
292 	IOMUX_PADS(PAD_EIM_A22__GPIO2_IO16	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
293 };
294 
295 static void setup_iomux_boardid(void)
296 {
297 	/* HW code pins: Setup alternate function and configure pads */
298 	SETUP_IOMUX_PADS(hwcode_pads);
299 }
300 
301 /* DDR Code */
302 static iomux_v3_cfg_t const ddrcode_pads[] = {
303 	IOMUX_PADS(PAD_EIM_A16__GPIO2_IO22	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
304 	IOMUX_PADS(PAD_EIM_A17__GPIO2_IO21	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
305 };
306 
307 static void setup_iomux_ddrcode(void)
308 {
309 	/* ddr code pins */
310 	SETUP_IOMUX_PADS(ddrcode_pads);
311 }
312 
313 enum dhcom_ddr3_code {
314 	DH_DDR3_SIZE_256MIB = 0x00,
315 	DH_DDR3_SIZE_512MIB = 0x01,
316 	DH_DDR3_SIZE_1GIB   = 0x02,
317 	DH_DDR3_SIZE_2GIB   = 0x03
318 };
319 
320 #define DDR3_CODE_BIT_0   IMX_GPIO_NR(2, 22)
321 #define DDR3_CODE_BIT_1   IMX_GPIO_NR(2, 21)
322 
323 enum dhcom_ddr3_code dhcom_get_ddr3_code(void)
324 {
325 	enum dhcom_ddr3_code ddr3_code;
326 
327 	gpio_request(DDR3_CODE_BIT_0, "DDR3_CODE_BIT_0");
328 	gpio_request(DDR3_CODE_BIT_1, "DDR3_CODE_BIT_1");
329 
330 	gpio_direction_input(DDR3_CODE_BIT_0);
331 	gpio_direction_input(DDR3_CODE_BIT_1);
332 
333 	/* 256MB = 0b00; 512MB = 0b01; 1GB = 0b10; 2GB = 0b11 */
334 	ddr3_code = (!!gpio_get_value(DDR3_CODE_BIT_1) << 1)
335 	     | (!!gpio_get_value(DDR3_CODE_BIT_0));
336 
337 	return ddr3_code;
338 }
339 
340 /* GPIO */
341 static iomux_v3_cfg_t const gpio_pads[] = {
342 	IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
343 	IOMUX_PADS(PAD_GPIO_4__GPIO1_IO04	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
344 	IOMUX_PADS(PAD_GPIO_5__GPIO1_IO05	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
345 	IOMUX_PADS(PAD_CSI0_DAT17__GPIO6_IO03	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
346 	IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
347 	IOMUX_PADS(PAD_DI0_PIN4__GPIO4_IO20	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
348 	IOMUX_PADS(PAD_EIM_D27__GPIO3_IO27	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
349 	IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
350 	IOMUX_PADS(PAD_KEY_COL1__GPIO4_IO08	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
351 	IOMUX_PADS(PAD_NANDF_CS1__GPIO6_IO14	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
352 	IOMUX_PADS(PAD_NANDF_CS2__GPIO6_IO15	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
353 	IOMUX_PADS(PAD_KEY_ROW1__GPIO4_IO09	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
354 	IOMUX_PADS(PAD_SD3_DAT5__GPIO7_IO00	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
355 	IOMUX_PADS(PAD_SD3_DAT4__GPIO7_IO01	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
356 	IOMUX_PADS(PAD_CSI0_VSYNC__GPIO5_IO21	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
357 	IOMUX_PADS(PAD_GPIO_18__GPIO7_IO13	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
358 	IOMUX_PADS(PAD_SD1_CMD__GPIO1_IO18	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
359 	IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
360 	IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
361 	IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
362 	IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
363 	IOMUX_PADS(PAD_CSI0_PIXCLK__GPIO5_IO18	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
364 	IOMUX_PADS(PAD_CSI0_MCLK__GPIO5_IO19	| MUX_PAD_CTRL(GPIO_PAD_CTRL)),
365 };
366 
367 static void setup_iomux_gpio(void)
368 {
369 	SETUP_IOMUX_PADS(gpio_pads);
370 }
371 
372 /* Ethernet */
373 static iomux_v3_cfg_t const enet_pads[] = {
374 	IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
375 	IOMUX_PADS(PAD_ENET_MDC__ENET_MDC	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
376 	IOMUX_PADS(PAD_ENET_TX_EN__ENET_TX_EN	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
377 	IOMUX_PADS(PAD_ENET_TXD0__ENET_TX_DATA0	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
378 	IOMUX_PADS(PAD_ENET_TXD1__ENET_TX_DATA1	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
379 	IOMUX_PADS(PAD_GPIO_16__ENET_REF_CLK	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
380 	IOMUX_PADS(PAD_ENET_RX_ER__ENET_RX_ER	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
381 	IOMUX_PADS(PAD_ENET_RXD0__ENET_RX_DATA0	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
382 	IOMUX_PADS(PAD_ENET_RXD1__ENET_RX_DATA1	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
383 	IOMUX_PADS(PAD_ENET_CRS_DV__ENET_RX_EN	| MUX_PAD_CTRL(ENET_PAD_CTRL)),
384 	/* SMSC PHY Reset */
385 	IOMUX_PADS(PAD_EIM_WAIT__GPIO5_IO00	| MUX_PAD_CTRL(NO_PAD_CTRL)),
386 	/* ENET_VIO_GPIO */
387 	IOMUX_PADS(PAD_GPIO_7__GPIO1_IO07	| MUX_PAD_CTRL(NO_PAD_CTRL)),
388 	/* ENET_Interrupt - (not used) */
389 	IOMUX_PADS(PAD_RGMII_RD0__GPIO6_IO25	| MUX_PAD_CTRL(NO_PAD_CTRL)),
390 };
391 
392 static void setup_iomux_enet(void)
393 {
394 	SETUP_IOMUX_PADS(enet_pads);
395 }
396 
397 /* SD interface */
398 static iomux_v3_cfg_t const usdhc2_pads[] = {
399 	IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
400 	IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
401 	IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
402 	IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
403 	IOMUX_PADS(PAD_SD2_CLK__SD2_CLK		| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
404 	IOMUX_PADS(PAD_SD2_CMD__SD2_CMD		| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
405 	IOMUX_PADS(PAD_NANDF_CS3__GPIO6_IO16	| MUX_PAD_CTRL(NO_PAD_CTRL)), /* CD */
406 };
407 
408 /* onboard microSD */
409 static iomux_v3_cfg_t const usdhc3_pads[] = {
410 	IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
411 	IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
412 	IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
413 	IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
414 	IOMUX_PADS(PAD_SD3_CLK__SD3_CLK		| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
415 	IOMUX_PADS(PAD_SD3_CMD__SD3_CMD		| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
416 	IOMUX_PADS(PAD_SD3_RST__GPIO7_IO08	| MUX_PAD_CTRL(NO_PAD_CTRL)), /* CD */
417 };
418 
419 /* eMMC */
420 static iomux_v3_cfg_t const usdhc4_pads[] = {
421 	IOMUX_PADS(PAD_SD4_DAT0__SD4_DATA0	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
422 	IOMUX_PADS(PAD_SD4_DAT1__SD4_DATA1	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
423 	IOMUX_PADS(PAD_SD4_DAT2__SD4_DATA2	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
424 	IOMUX_PADS(PAD_SD4_DAT3__SD4_DATA3	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
425 	IOMUX_PADS(PAD_SD4_DAT4__SD4_DATA4	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
426 	IOMUX_PADS(PAD_SD4_DAT5__SD4_DATA5	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
427 	IOMUX_PADS(PAD_SD4_DAT6__SD4_DATA6	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
428 	IOMUX_PADS(PAD_SD4_DAT7__SD4_DATA7	| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
429 	IOMUX_PADS(PAD_SD4_CLK__SD4_CLK		| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
430 	IOMUX_PADS(PAD_SD4_CMD__SD4_CMD		| MUX_PAD_CTRL(USDHC_PAD_CTRL)),
431 };
432 
433 /* SD */
434 static void setup_iomux_sd(void)
435 {
436 	SETUP_IOMUX_PADS(usdhc2_pads);
437 	SETUP_IOMUX_PADS(usdhc3_pads);
438 	SETUP_IOMUX_PADS(usdhc4_pads);
439 }
440 
441 /* SPI */
442 static iomux_v3_cfg_t const ecspi1_pads[] = {
443 	/* SS0 */
444 	IOMUX_PADS(PAD_EIM_EB2__GPIO2_IO30	| MUX_PAD_CTRL(SPI_PAD_CTRL)),
445 	IOMUX_PADS(PAD_EIM_D17__ECSPI1_MISO	| MUX_PAD_CTRL(SPI_PAD_CTRL)),
446 	IOMUX_PADS(PAD_EIM_D18__ECSPI1_MOSI	| MUX_PAD_CTRL(SPI_PAD_CTRL)),
447 	IOMUX_PADS(PAD_EIM_D16__ECSPI1_SCLK	| MUX_PAD_CTRL(SPI_PAD_CTRL)),
448 };
449 
450 static void setup_iomux_spi(void)
451 {
452 	SETUP_IOMUX_PADS(ecspi1_pads);
453 }
454 
455 int board_spi_cs_gpio(unsigned bus, unsigned cs)
456 {
457 	if (bus == 0 && cs == 0)
458 		return IMX_GPIO_NR(2, 30);
459 	else
460 		return -1;
461 }
462 
463 /* UART */
464 static iomux_v3_cfg_t const uart1_pads[] = {
465 	IOMUX_PADS(PAD_SD3_DAT7__UART1_TX_DATA	| MUX_PAD_CTRL(UART_PAD_CTRL)),
466 	IOMUX_PADS(PAD_SD3_DAT6__UART1_RX_DATA	| MUX_PAD_CTRL(UART_PAD_CTRL)),
467 };
468 
469 static void setup_iomux_uart(void)
470 {
471 	SETUP_IOMUX_PADS(uart1_pads);
472 }
473 
474 /* USB */
475 static iomux_v3_cfg_t const usb_pads[] = {
476 	IOMUX_PADS(PAD_GPIO_1__USB_OTG_ID	| MUX_PAD_CTRL(NO_PAD_CTRL)),
477 	IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31	| MUX_PAD_CTRL(NO_PAD_CTRL)),
478 };
479 
480 static void setup_iomux_usb(void)
481 {
482 	SETUP_IOMUX_PADS(usb_pads);
483 }
484 
485 
486 /* DRAM */
487 static void dhcom_spl_dram_init(void)
488 {
489 	enum dhcom_ddr3_code ddr3_code = dhcom_get_ddr3_code();
490 
491 	if (is_mx6dq()) {
492 		mx6dq_dram_iocfg(64, &dhcom6dq_ddr_ioregs,
493 					&dhcom6dq_grp_ioregs);
494 		switch (ddr3_code) {
495 		default:
496 			printf("imx6qd: unsupported ddr3 code %d\n", ddr3_code);
497 			printf("        choosing 1024 MB\n");
498 			/* fall through */
499 		case DH_DDR3_SIZE_1GIB:
500 			mx6_dram_cfg(&dhcom_ddr_64bit,
501 				     &dhcom_mmdc_calib_4x2g_1066,
502 				     &dhcom_mem_ddr_2g);
503 			break;
504 		case DH_DDR3_SIZE_2GIB:
505 			mx6_dram_cfg(&dhcom_ddr_64bit,
506 				     &dhcom_mmdc_calib_4x4g_1066,
507 				     &dhcom_mem_ddr_4g);
508 			break;
509 		}
510 
511 		/* Perform DDR DRAM calibration */
512 		udelay(100);
513 		mmdc_do_dqs_calibration(&dhcom_ddr_64bit);
514 
515 	} else if (is_cpu_type(MXC_CPU_MX6DL)) {
516 		mx6sdl_dram_iocfg(64, &dhcom6sdl_ddr_ioregs,
517 					  &dhcom6sdl_grp_ioregs);
518 		switch (ddr3_code) {
519 		default:
520 			printf("imx6dl: unsupported ddr3 code %d\n", ddr3_code);
521 			printf("        choosing 1024 MB\n");
522 			/* fall through */
523 		case DH_DDR3_SIZE_1GIB:
524 			mx6_dram_cfg(&dhcom_ddr_64bit,
525 				     &dhcom_mmdc_calib_4x2g_800,
526 				     &dhcom_mem_ddr_2g);
527 			break;
528 		}
529 
530 		/* Perform DDR DRAM calibration */
531 		udelay(100);
532 		mmdc_do_dqs_calibration(&dhcom_ddr_64bit);
533 
534 	} else if (is_cpu_type(MXC_CPU_MX6SOLO)) {
535 		mx6sdl_dram_iocfg(32, &dhcom6sdl_ddr_ioregs,
536 					  &dhcom6sdl_grp_ioregs);
537 		switch (ddr3_code) {
538 		default:
539 			printf("imx6s: unsupported ddr3 code %d\n", ddr3_code);
540 			printf("       choosing 512 MB\n");
541 			/* fall through */
542 		case DH_DDR3_SIZE_512MIB:
543 			mx6_dram_cfg(&dhcom_ddr_32bit,
544 				     &dhcom_mmdc_calib_2x2g_800,
545 				     &dhcom_mem_ddr_2g);
546 			break;
547 		case DH_DDR3_SIZE_1GIB:
548 			mx6_dram_cfg(&dhcom_ddr_32bit,
549 				     &dhcom_mmdc_calib_2x4g_800,
550 				     &dhcom_mem_ddr_4g);
551 			break;
552 		}
553 
554 		/* Perform DDR DRAM calibration */
555 		udelay(100);
556 		mmdc_do_dqs_calibration(&dhcom_ddr_32bit);
557 	}
558 }
559 
560 void board_init_f(ulong dummy)
561 {
562 	/* setup AIPS and disable watchdog */
563 	arch_cpu_init();
564 
565 	ccgr_init();
566 	gpr_init();
567 
568 	/* setup GP timer */
569 	timer_init();
570 
571 	setup_iomux_boardid();
572 	setup_iomux_ddrcode();
573 	setup_iomux_gpio();
574 	setup_iomux_enet();
575 	setup_iomux_sd();
576 	setup_iomux_spi();
577 	setup_iomux_uart();
578 	setup_iomux_usb();
579 
580 	/* UART clocks enabled and gd valid - init serial console */
581 	preloader_console_init();
582 
583 	/* DDR3 initialization */
584 	dhcom_spl_dram_init();
585 
586 	/* Clear the BSS. */
587 	memset(__bss_start, 0, __bss_end - __bss_start);
588 
589 	/* load/boot image from boot device */
590 	board_init_r(NULL, 0);
591 }
592