1 /* 2 * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ 3 * 4 * Based on da830evm.c. Original Copyrights follow: 5 * 6 * Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. <nick.thompson@gefanuc.com> 7 * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License as published by 11 * the Free Software Foundation; either version 2 of the License, or 12 * (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 22 */ 23 24 #include <common.h> 25 #include <i2c.h> 26 #include <net.h> 27 #include <netdev.h> 28 #include <asm/arch/hardware.h> 29 #include <asm/arch/emif_defs.h> 30 #include <asm/arch/emac_defs.h> 31 #include <asm/io.h> 32 #include <asm/arch/davinci_misc.h> 33 34 DECLARE_GLOBAL_DATA_PTR; 35 36 #define pinmux(x) (&davinci_syscfg_regs->pinmux[x]) 37 38 /* SPI0 pin muxer settings */ 39 static const struct pinmux_config spi1_pins[] = { 40 { pinmux(5), 1, 1 }, 41 { pinmux(5), 1, 2 }, 42 { pinmux(5), 1, 4 }, 43 { pinmux(5), 1, 5 } 44 }; 45 46 /* UART pin muxer settings */ 47 static const struct pinmux_config uart_pins[] = { 48 { pinmux(0), 4, 6 }, 49 { pinmux(0), 4, 7 }, 50 { pinmux(4), 2, 4 }, 51 { pinmux(4), 2, 5 } 52 }; 53 54 #ifdef CONFIG_DRIVER_TI_EMAC 55 static const struct pinmux_config emac_pins[] = { 56 #ifdef CONFIG_DRIVER_TI_EMAC_USE_RMII 57 { pinmux(14), 8, 2 }, 58 { pinmux(14), 8, 3 }, 59 { pinmux(14), 8, 4 }, 60 { pinmux(14), 8, 5 }, 61 { pinmux(14), 8, 6 }, 62 { pinmux(14), 8, 7 }, 63 { pinmux(15), 8, 1 }, 64 #else /* ! CONFIG_DRIVER_TI_EMAC_USE_RMII */ 65 { pinmux(2), 8, 1 }, 66 { pinmux(2), 8, 2 }, 67 { pinmux(2), 8, 3 }, 68 { pinmux(2), 8, 4 }, 69 { pinmux(2), 8, 5 }, 70 { pinmux(2), 8, 6 }, 71 { pinmux(2), 8, 7 }, 72 { pinmux(3), 8, 0 }, 73 { pinmux(3), 8, 1 }, 74 { pinmux(3), 8, 2 }, 75 { pinmux(3), 8, 3 }, 76 { pinmux(3), 8, 4 }, 77 { pinmux(3), 8, 5 }, 78 { pinmux(3), 8, 6 }, 79 { pinmux(3), 8, 7 }, 80 #endif /* CONFIG_DRIVER_TI_EMAC_USE_RMII */ 81 { pinmux(4), 8, 0 }, 82 { pinmux(4), 8, 1 } 83 }; 84 85 /* I2C pin muxer settings */ 86 static const struct pinmux_config i2c_pins[] = { 87 { pinmux(4), 2, 2 }, 88 { pinmux(4), 2, 3 } 89 }; 90 91 #ifdef CONFIG_NAND_DAVINCI 92 const struct pinmux_config nand_pins[] = { 93 { pinmux(7), 1, 1 }, 94 { pinmux(7), 1, 2 }, 95 { pinmux(7), 1, 4 }, 96 { pinmux(7), 1, 5 }, 97 { pinmux(9), 1, 0 }, 98 { pinmux(9), 1, 1 }, 99 { pinmux(9), 1, 2 }, 100 { pinmux(9), 1, 3 }, 101 { pinmux(9), 1, 4 }, 102 { pinmux(9), 1, 5 }, 103 { pinmux(9), 1, 6 }, 104 { pinmux(9), 1, 7 }, 105 { pinmux(12), 1, 5 }, 106 { pinmux(12), 1, 6 } 107 }; 108 #endif 109 110 #ifdef CONFIG_DRIVER_TI_EMAC_USE_RMII 111 #define HAS_RMII 1 112 #else 113 #define HAS_RMII 0 114 #endif 115 #endif /* CONFIG_DRIVER_TI_EMAC */ 116 117 static const struct pinmux_resource pinmuxes[] = { 118 #ifdef CONFIG_SPI_FLASH 119 PINMUX_ITEM(spi1_pins), 120 #endif 121 PINMUX_ITEM(uart_pins), 122 PINMUX_ITEM(i2c_pins), 123 #ifdef CONFIG_NAND_DAVINCI 124 PINMUX_ITEM(nand_pins), 125 #endif 126 }; 127 128 static const struct lpsc_resource lpsc[] = { 129 { DAVINCI_LPSC_AEMIF }, /* NAND, NOR */ 130 { DAVINCI_LPSC_SPI1 }, /* Serial Flash */ 131 { DAVINCI_LPSC_EMAC }, /* image download */ 132 { DAVINCI_LPSC_UART2 }, /* console */ 133 { DAVINCI_LPSC_GPIO }, 134 }; 135 136 #ifndef CONFIG_DA850_EVM_MAX_CPU_CLK 137 #define CONFIG_DA850_EVM_MAX_CPU_CLK 300000000 138 #endif 139 140 /* 141 * get_board_rev() - setup to pass kernel board revision information 142 * Returns: 143 * bit[0-3] Maximum cpu clock rate supported by onboard SoC 144 * 0000b - 300 MHz 145 * 0001b - 372 MHz 146 * 0010b - 408 MHz 147 * 0011b - 456 MHz 148 */ 149 u32 get_board_rev(void) 150 { 151 char *s; 152 u32 maxcpuclk = CONFIG_DA850_EVM_MAX_CPU_CLK; 153 u32 rev = 0; 154 155 s = getenv("maxcpuclk"); 156 if (s) 157 maxcpuclk = simple_strtoul(s, NULL, 10); 158 159 if (maxcpuclk >= 456000000) 160 rev = 3; 161 else if (maxcpuclk >= 408000000) 162 rev = 2; 163 else if (maxcpuclk >= 372000000) 164 rev = 1; 165 166 return rev; 167 } 168 169 int board_init(void) 170 { 171 #ifndef CONFIG_USE_IRQ 172 irq_init(); 173 #endif 174 175 176 #ifdef CONFIG_NAND_DAVINCI 177 /* 178 * NAND CS setup - cycle counts based on da850evm NAND timings in the 179 * Linux kernel @ 25MHz EMIFA 180 */ 181 writel((DAVINCI_ABCR_WSETUP(0) | 182 DAVINCI_ABCR_WSTROBE(0) | 183 DAVINCI_ABCR_WHOLD(0) | 184 DAVINCI_ABCR_RSETUP(0) | 185 DAVINCI_ABCR_RSTROBE(1) | 186 DAVINCI_ABCR_RHOLD(0) | 187 DAVINCI_ABCR_TA(0) | 188 DAVINCI_ABCR_ASIZE_8BIT), 189 &davinci_emif_regs->ab2cr); /* CS3 */ 190 #endif 191 192 /* arch number of the board */ 193 gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DA850_EVM; 194 195 /* address of boot parameters */ 196 gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; 197 198 /* 199 * Power on required peripherals 200 * ARM does not have access by default to PSC0 and PSC1 201 * assuming here that the DSP bootloader has set the IOPU 202 * such that PSC access is available to ARM 203 */ 204 if (da8xx_configure_lpsc_items(lpsc, ARRAY_SIZE(lpsc))) 205 return 1; 206 207 /* setup the SUSPSRC for ARM to control emulation suspend */ 208 writel(readl(&davinci_syscfg_regs->suspsrc) & 209 ~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C | 210 DAVINCI_SYSCFG_SUSPSRC_SPI1 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 | 211 DAVINCI_SYSCFG_SUSPSRC_UART2), 212 &davinci_syscfg_regs->suspsrc); 213 214 /* configure pinmux settings */ 215 if (davinci_configure_pin_mux_items(pinmuxes, ARRAY_SIZE(pinmuxes))) 216 return 1; 217 218 #ifdef CONFIG_DRIVER_TI_EMAC 219 if (davinci_configure_pin_mux(emac_pins, ARRAY_SIZE(emac_pins)) != 0) 220 return 1; 221 222 davinci_emac_mii_mode_sel(HAS_RMII); 223 #endif /* CONFIG_DRIVER_TI_EMAC */ 224 225 /* enable the console UART */ 226 writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST | 227 DAVINCI_UART_PWREMU_MGMT_UTRST), 228 &davinci_uart2_ctrl_regs->pwremu_mgmt); 229 230 return 0; 231 } 232 233 #ifdef CONFIG_DRIVER_TI_EMAC 234 235 #ifdef CONFIG_DRIVER_TI_EMAC_USE_RMII 236 /** 237 * rmii_hw_init 238 * 239 * DA850/OMAP-L138 EVM can interface to a daughter card for 240 * additional features. This card has an I2C GPIO Expander TCA6416 241 * to select the required functions like camera, RMII Ethernet, 242 * character LCD, video. 243 * 244 * Initialization of the expander involves configuring the 245 * polarity and direction of the ports. P07-P05 are used here. 246 * These ports are connected to a Mux chip which enables only one 247 * functionality at a time. 248 * 249 * For RMII phy to respond, the MII MDIO clock has to be disabled 250 * since both the PHY devices have address as zero. The MII MDIO 251 * clock is controlled via GPIO2[6]. 252 * 253 * This code is valid for Beta version of the hardware 254 */ 255 int rmii_hw_init(void) 256 { 257 const struct pinmux_config gpio_pins[] = { 258 { pinmux(6), 8, 1 } 259 }; 260 u_int8_t buf[2]; 261 unsigned int temp; 262 int ret; 263 264 /* PinMux for GPIO */ 265 if (davinci_configure_pin_mux(gpio_pins, ARRAY_SIZE(gpio_pins)) != 0) 266 return 1; 267 268 /* I2C Exapnder configuration */ 269 /* Set polarity to non-inverted */ 270 buf[0] = 0x0; 271 buf[1] = 0x0; 272 ret = i2c_write(CONFIG_SYS_I2C_EXPANDER_ADDR, 4, 1, buf, 2); 273 if (ret) { 274 printf("\nExpander @ 0x%02x write FAILED!!!\n", 275 CONFIG_SYS_I2C_EXPANDER_ADDR); 276 return ret; 277 } 278 279 /* Configure P07-P05 as outputs */ 280 buf[0] = 0x1f; 281 buf[1] = 0xff; 282 ret = i2c_write(CONFIG_SYS_I2C_EXPANDER_ADDR, 6, 1, buf, 2); 283 if (ret) { 284 printf("\nExpander @ 0x%02x write FAILED!!!\n", 285 CONFIG_SYS_I2C_EXPANDER_ADDR); 286 } 287 288 /* For Ethernet RMII selection 289 * P07(SelA)=0 290 * P06(SelB)=1 291 * P05(SelC)=1 292 */ 293 if (i2c_read(CONFIG_SYS_I2C_EXPANDER_ADDR, 2, 1, buf, 1)) { 294 printf("\nExpander @ 0x%02x read FAILED!!!\n", 295 CONFIG_SYS_I2C_EXPANDER_ADDR); 296 } 297 298 buf[0] &= 0x1f; 299 buf[0] |= (0 << 7) | (1 << 6) | (1 << 5); 300 if (i2c_write(CONFIG_SYS_I2C_EXPANDER_ADDR, 2, 1, buf, 1)) { 301 printf("\nExpander @ 0x%02x write FAILED!!!\n", 302 CONFIG_SYS_I2C_EXPANDER_ADDR); 303 } 304 305 /* Set the output as high */ 306 temp = REG(GPIO_BANK2_REG_SET_ADDR); 307 temp |= (0x01 << 6); 308 REG(GPIO_BANK2_REG_SET_ADDR) = temp; 309 310 /* Set the GPIO direction as output */ 311 temp = REG(GPIO_BANK2_REG_DIR_ADDR); 312 temp &= ~(0x01 << 6); 313 REG(GPIO_BANK2_REG_DIR_ADDR) = temp; 314 315 return 0; 316 } 317 #endif /* CONFIG_DRIVER_TI_EMAC_USE_RMII */ 318 319 /* 320 * Initializes on-board ethernet controllers. 321 */ 322 int board_eth_init(bd_t *bis) 323 { 324 #ifdef CONFIG_DRIVER_TI_EMAC_USE_RMII 325 /* Select RMII fucntion through the expander */ 326 if (rmii_hw_init()) 327 printf("RMII hardware init failed!!!\n"); 328 #endif 329 if (!davinci_emac_initialize()) { 330 printf("Error: Ethernet init failed!\n"); 331 return -1; 332 } 333 334 return 0; 335 } 336 #endif /* CONFIG_DRIVER_TI_EMAC */ 337